2015-11-18 14:49:51 +00:00
2016-01-02 17:55:10 +00:00
[](https://gitter.im/rene-dev/stmbl?utm_source=badge& utm_medium=badge& utm_campaign=pr-badge& utm_content=badge)
2015-11-18 14:49:51 +00:00
Build Log: https://travis-ci.org/rene-dev/stmbl
2015-03-24 22:37:45 +00:00
DISCLAIMER
===
2015-12-30 01:03:28 +00:00
2015-03-24 22:37:45 +00:00
THE AUTHORS OF THIS SOFTWARE ACCEPT ABSOLUTELY NO LIABILITY FOR
ANY HARM OR LOSS RESULTING FROM ITS USE. IT IS _EXTREMELY_ UNWISE
TO RELY ON SOFTWARE ALONE FOR SAFETY. Any machinery capable of
harming persons must have provisions for completely removing power
from all motors, etc, before persons enter any danger area. All
machinery must be designed to comply with local and national safety
codes, and the authors of this software can not, and do not, take
any responsibility for such compliance.
This software is released under the GPLv3.
2014-10-28 12:20:28 +00:00
stmbl
=====
2015-12-03 05:49:24 +00:00
There is a wiki. https://github.com/rene-dev/stmbl/wiki
There will be documentation.
2015-07-12 10:51:06 +00:00
2016-02-16 14:21:25 +00:00
**IRC: #stmbl on irc.hackint.eu**
https://webirc.hackint.org/#stmbl
2015-05-08 10:01:36 +00:00
stmbl is an open source servo drive designed for Retrofitting CNC machines and Robots. It supports Industrial AC and DC servos with up to 320V and 1kW.
Documentation about the PCB and pinout of the feedback connector:
https://github.com/rene-dev/stmbl/wiki/Pinouts
https://github.com/rene-dev/stmbl/wiki/PCB
2015-04-01 05:05:15 +00:00
##### Hardware version 3.2
2015-03-24 22:37:45 +00:00
2014-10-28 12:20:28 +00:00
2014-11-08 08:51:00 +00:00
##### Driving a Bosch Turboscara
https://www.youtube.com/watch?v=Ue98HE76paI
2015-10-13 13:41:33 +00:00
2015-10-13 13:41:19 +00:00
https://www.youtube.com/watch?v=d6NH1W7DUnQ
2014-11-08 08:51:00 +00:00
##### Drivetest
https://www.youtube.com/watch?v=sMeV4SCu4TA
2015-01-18 20:23:51 +00:00
##### Drivetest with asymmetrical load
https://www.youtube.com/watch?v=seEV_i7o1NI
2014-10-28 12:20:28 +00:00
2015-01-18 20:23:51 +00:00
####Supported Motors
* Synchronous AC Servos
* DC Servos
2015-03-24 22:37:45 +00:00
* 2 Phase HF spindle motors
2015-10-13 13:43:28 +00:00
* IRAMX Hardware testet up to 320V
2014-10-28 12:20:28 +00:00
2015-01-18 20:23:51 +00:00
####Supported Feedback systems
* Resolvers
* Incremental encoders
* sin/cos encoder interpolation
2015-03-13 13:14:09 +00:00
* Mitsubishi absolute encoders
2015-10-13 13:43:28 +00:00
* Sanyo Denki absolute encoders
2015-12-03 05:47:28 +00:00
* Yaskawa absolute encoders
2015-11-18 13:55:56 +00:00
* Sick HIPERFACE®
2015-12-03 05:48:34 +00:00
2015-12-03 05:47:28 +00:00
#####Planned:
* EnDat
* BiSS
* SSI
2016-07-07 13:24:20 +00:00
* Sanyo Denki wire-saving incremental encoder
2015-01-18 20:23:51 +00:00
2014-10-28 15:20:56 +00:00
####TODO
* AC Async
2014-10-28 12:20:28 +00:00
####Directories
* hw/eagle/ Eagle board files and schematics
* hw/spice/ Spice simulation for resolver interface
2015-01-18 20:23:51 +00:00
* src/ STM32F4 code, command, feedback and control loop
* stm32f103/ STM32F1 code, running on the HV side, generating PWM
2015-12-03 05:47:28 +00:00
* bootloader/ bootloader for the f4
2014-10-28 12:20:28 +00:00
* term/ Terminal with scope and local history. Supports UHU servo and stmbl.
