/** ****************************************************************************** * @file stm32f4xx_spdifrx.h * @author MCD Application Team * @version V1.6.0 * @date 10-July-2015 * @brief This file contains all the functions prototypes for the SPDIFRX firmware * library. ****************************************************************************** * @attention * *

© COPYRIGHT 2015 STMicroelectronics

* * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); * You may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.st.com/software_license_agreement_liberty_v2 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_SPDIFRX_H #define __STM32F4xx_SPDIFRX_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx.h" /** @addtogroup STM32F4xx_StdPeriph_Driver * @{ */ /** @addtogroup SPDIFRX * @{ */ #if defined(STM32F446xx) /* Exported types ------------------------------------------------------------*/ /** * @brief SPDIFRX Init structure definition */ typedef struct { uint32_t SPDIFRX_InputSelection; /*!< Specifies the SPDIFRX input selection. This parameter can be a value of @ref SPDIFRX_Input_Selection */ uint32_t SPDIFRX_Retries; /*!< Specifies the Maximum allowed re-tries during synchronization phase. This parameter can be a value of @ref SPDIFRX_Max_Retries */ uint32_t SPDIFRX_WaitForActivity; /*!< Specifies the wait for activity on SPDIFRX selected input. This parameter can be a value of @ref SPDIFRX_Wait_For_Activity. */ uint32_t SPDIFRX_ChannelSelection; /*!< Specifies whether the control flow will take the channel status from channel A or B. This parameter can be a value of @ref SPDIFRX_Channel_Selection */ uint32_t SPDIFRX_DataFormat; /*!< Specifies the Data samples format (LSB, MSB, ...). This parameter can be a value of @ref SPDIFRX_Data_Format */ uint32_t SPDIFRX_StereoMode; /*!< Specifies whether the peripheral is in stereo or mono mode. This parameter can be a value of @ref SPDIFRX_Stereo_Mode */ }SPDIFRX_InitTypeDef; /* Exported constants --------------------------------------------------------*/ /** @defgroup SPDIFRX_Exported_Constants * @{ */ #define IS_SPDIFRX_PERIPH(PERIPH) (((PERIPH) == SPDIFRX)) /** @defgroup SPDIFRX_Input_Selection SPDIFRX Input Selection * @{ */ #define SPDIFRX_Input_IN0 ((uint32_t)0x00000000) #define SPDIFRX_Input_IN1 ((uint32_t)0x00010000) #define SPDIFRX_Input_IN2 ((uint32_t)0x00020000) #define SPDIFRX_Input_IN3 ((uint32_t)0x00030000) #define IS_SPDIFRX_INPUT_SELECT(INPUT) (((INPUT) == SPDIFRX_Input_IN1) || \ ((INPUT) == SPDIFRX_Input_IN2) || \ ((INPUT) == SPDIFRX_Input_IN3) || \ ((INPUT) == SPDIFRX_Input_IN0)) /** * @} */ /** @defgroup SPDIFRX_Max_Retries SPDIFRX Max Retries * @{ */ #define SPDIFRX_1MAX_RETRIES ((uint32_t)0x00000000) #define SPDIFRX_4MAX_RETRIES ((uint32_t)0x00001000) #define SPDIFRX_16MAX_RETRIES ((uint32_t)0x00002000) #define SPDIFRX_64MAX_RETRIES ((uint32_t)0x00003000) #define IS_SPDIFRX_MAX_RETRIES(RET) (((RET) == SPDIFRX_1MAX_RETRIES) || \ ((RET) == SPDIFRX_4MAX_RETRIES) || \ ((RET) == SPDIFRX_16MAX_RETRIES) || \ ((RET) == SPDIFRX_64MAX_RETRIES)) /** * @} */ /** @defgroup SPDIFRX_Wait_For_Activity SPDIFRX Wait For Activity * @{ */ #define SPDIFRX_WaitForActivity_Off ((uint32_t)0x00000000) #define SPDIFRX_WaitForActivity_On ((uint32_t)SPDIFRX_CR_WFA) #define IS_SPDIFRX_WAIT_FOR_ACTIVITY(VAL) (((VAL) == SPDIFRX_WaitForActivity_On) || \ ((VAL) == SPDIFRX_WaitForActivity_Off)) /** * @} */ /** @defgroup SPDIFRX_ChannelSelection SPDIFRX Channel Selection * @{ */ #define SPDIFRX_Select_Channel_A ((uint32_t)0x00000000) #define SPDIFRX_Select_Channel_B ((uint32_t)SPDIFRX_CR_CHSEL) #define IS_SPDIFRX_CHANNEL(CHANNEL) (((CHANNEL) == SPDIFRX_Select_Channel_A) || \ ((CHANNEL) == SPDIFRX_Select_Channel_B)) /** * @} */ /** @defgroup SPDIFRX_Block_Synchronization SPDIFRX Block Synchronization * @{ */ #define SPDIFRX_LSB_DataFormat ((uint32_t)0x00000000) #define SPDIFRX_MSB_DataFormat ((uint32_t)0x00000010) #define SPDIFRX_32BITS_DataFormat ((uint32_t)0x00000020) #define IS_SPDIFRX_DATA_FORMAT(FORMAT) (((FORMAT) == SPDIFRX_LSB_DataFormat) || \ ((FORMAT) == SPDIFRX_MSB_DataFormat) || \ ((FORMAT) == SPDIFRX_32BITS_DataFormat)) /** * @} */ /** @defgroup SPDIFRX_StereoMode SPDIFRX StereoMode * @{ */ #define SPDIFRX_StereoMode_Disabled ((uint32_t)0x00000000) #define SPDIFRX_StereoMode_Enabled ((uint32_t)SPDIFRX_CR_RXSTEO) #define IS_STEREO_MODE(MODE) (((MODE) == SPDIFRX_StereoMode_Disabled) || \ ((MODE) == SPDIFRX_StereoMode_Enabled)) /** * @} */ /** @defgroup SPDIFRX_State SPDIFRX State * @{ */ #define SPDIFRX_STATE_IDLE ((uint32_t)0x00000000) #define SPDIFRX_STATE_SYNC ((uint32_t)0x00000001) #define SPDIFRX_STATE_RCV ((uint32_t)SPDIFRX_CR_SPDIFEN) #define IS_SPDIFRX_STATE(STATE) (((STATE) == SPDIFRX_STATE_IDLE) || \ ((STATE) == SPDIFRX_STATE_SYNC) || \ ((STATE) == SPDIFRX_STATE_RCV)) /** * @} */ /** @defgroup SPDIFRX_Interrupts_Definition SPDIFRX Interrupts Definition * @{ */ #define SPDIFRX_IT_RXNE ((uint32_t)SPDIFRX_IMR_RXNEIE) #define SPDIFRX_IT_CSRNE ((uint32_t)SPDIFRX_IMR_CSRNEIE) #define SPDIFRX_IT_PERRIE ((uint32_t)SPDIFRX_IMR_PERRIE) #define SPDIFRX_IT_OVRIE ((uint32_t)SPDIFRX_IMR_OVRIE) #define SPDIFRX_IT_SBLKIE ((uint32_t)SPDIFRX_IMR_SBLKIE) #define SPDIFRX_IT_SYNCDIE ((uint32_t)SPDIFRX_IMR_SYNCDIE) #define SPDIFRX_IT_IFEIE ((uint32_t)SPDIFRX_IMR_IFEIE ) #define IS_SPDIFRX_CONFIG_IT(IT) (((IT) == SPDIFRX_IT_RXNE) || \ ((IT) == SPDIFRX_IT_CSRNE) || \ ((IT) == SPDIFRX_IT_PERRIE) || \ ((IT) == SPDIFRX_IT_OVRIE) || \ ((IT) == SPDIFRX_IT_SBLKIE) || \ ((IT) == SPDIFRX_IT_SYNCDIE) || \ ((IT) == SPDIFRX_IT_IFEIE)) /** * @} */ /** @defgroup SPDIFRX_Flags_Definition SPDIFRX Flags Definition * @{ */ #define SPDIFRX_FLAG_RXNE ((uint32_t)SPDIFRX_SR_RXNE) #define SPDIFRX_FLAG_CSRNE ((uint32_t)SPDIFRX_SR_CSRNE) #define SPDIFRX_FLAG_PERR ((uint32_t)SPDIFRX_SR_PERR) #define SPDIFRX_FLAG_OVR ((uint32_t)SPDIFRX_SR_OVR) #define SPDIFRX_FLAG_SBD ((uint32_t)SPDIFRX_SR_SBD) #define SPDIFRX_FLAG_SYNCD ((uint32_t)SPDIFRX_SR_SYNCD) #define SPDIFRX_FLAG_FERR ((uint32_t)SPDIFRX_SR_FERR) #define SPDIFRX_FLAG_SERR ((uint32_t)SPDIFRX_SR_SERR) #define SPDIFRX_FLAG_TERR ((uint32_t)SPDIFRX_SR_TERR) #define IS_SPDIFRX_FLAG(FLAG) (((FLAG) == SPDIFRX_FLAG_RXNE) || ((FLAG) == SPDIFRX_FLAG_CSRNE) || \ ((FLAG) == SPDIFRX_FLAG_PERR) || ((FLAG) == SPDIFRX_FLAG_OVR) || \ ((FLAG) == SPDIFRX_SR_SBD) || ((FLAG) == SPDIFRX_SR_SYNCD) || \ ((FLAG) == SPDIFRX_SR_FERR) || ((FLAG) == SPDIFRX_SR_SERR) || \ ((FLAG) == SPDIFRX_SR_TERR)) #define IS_SPDIFRX_CLEAR_FLAG(FLAG) (((FLAG) == SPDIFRX_FLAG_PERR) || ((FLAG) == SPDIFRX_FLAG_OVR) || \ ((FLAG) == SPDIFRX_SR_SBD) || ((FLAG) == SPDIFRX_SR_SYNCD)) /** * @} */ /** * @} */ /* Exported macro ------------------------------------------------------------*/ /* Exported functions --------------------------------------------------------*/ /* Function used to set the SPDIFRX configuration to the default reset state *****/ void SPDIFRX_DeInit(void); /* Initialization and Configuration functions *********************************/ void SPDIFRX_Init(SPDIFRX_InitTypeDef* SPDIFRX_InitStruct); void SPDIFRX_StructInit(SPDIFRX_InitTypeDef* SPDIFRX_InitStruct); void SPDIFRX_Cmd(uint32_t SPDIFRX_State); void SPDIFRX_SetPreambleTypeBit(FunctionalState NewState); void SPDIFRX_SetUserDataChannelStatusBits(FunctionalState NewState); void SPDIFRX_SetValidityBit(FunctionalState NewState); void SPDIFRX_SetParityBit(FunctionalState NewState); /* Data transfers functions ***************************************************/ uint32_t SPDIFRX_ReceiveData(void); /* DMA transfers management functions *****************************************/ void SPDIFRX_RxDMACmd(FunctionalState NewState); void SPDIFRX_CbDMACmd(FunctionalState NewState); /* Interrupts and flags management functions **********************************/ void SPDIFRX_ITConfig(uint32_t SPDIFRX_IT, FunctionalState NewState); FlagStatus SPDIFRX_GetFlagStatus(uint32_t SPDIFRX_FLAG); void SPDIFRX_ClearFlag(uint32_t SPDIFRX_FLAG); ITStatus SPDIFRX_GetITStatus(uint32_t SPDIFRX_IT); void SPDIFRX_ClearITPendingBit(uint32_t SPDIFRX_IT); #endif /* STM32F446xx */ /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /*__STM32F4xx_SPDIFRX_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/