/** ****************************************************************************** * @file stm32f10x_exti.h * @author MCD Application Team * @version V3.6.1 * @date 05-March-2012 * @brief This file contains all the functions prototypes for the EXTI firmware * library. ****************************************************************************** * @attention * *

© COPYRIGHT 2012 STMicroelectronics

* * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); * You may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.st.com/software_license_agreement_liberty_v2 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F10x_EXTI_H #define __STM32F10x_EXTI_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f10x.h" /** @addtogroup STM32F10x_StdPeriph_Driver * @{ */ /** @addtogroup EXTI * @{ */ /** @defgroup EXTI_Exported_Types * @{ */ /** * @brief EXTI mode enumeration */ typedef enum { EXTI_Mode_Interrupt = 0x00, EXTI_Mode_Event = 0x04 }EXTIMode_TypeDef; #define IS_EXTI_MODE(MODE) (((MODE) == EXTI_Mode_Interrupt) || ((MODE) == EXTI_Mode_Event)) /** * @brief EXTI Trigger enumeration */ typedef enum { EXTI_Trigger_Rising = 0x08, EXTI_Trigger_Falling = 0x0C, EXTI_Trigger_Rising_Falling = 0x10 }EXTITrigger_TypeDef; #define IS_EXTI_TRIGGER(TRIGGER) (((TRIGGER) == EXTI_Trigger_Rising) || \ ((TRIGGER) == EXTI_Trigger_Falling) || \ ((TRIGGER) == EXTI_Trigger_Rising_Falling)) /** * @brief EXTI Init Structure definition */ typedef struct { uint32_t EXTI_Line; /*!< Specifies the EXTI lines to be enabled or disabled. This parameter can be any combination of @ref EXTI_Lines */ EXTIMode_TypeDef EXTI_Mode; /*!< Specifies the mode for the EXTI lines. This parameter can be a value of @ref EXTIMode_TypeDef */ EXTITrigger_TypeDef EXTI_Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines. This parameter can be a value of @ref EXTITrigger_TypeDef */ FunctionalState EXTI_LineCmd; /*!< Specifies the new state of the selected EXTI lines. This parameter can be set either to ENABLE or DISABLE */ }EXTI_InitTypeDef; /** * @} */ /** @defgroup EXTI_Exported_Constants * @{ */ /** @defgroup EXTI_Lines * @{ */ #define EXTI_Line0 ((uint32_t)0x00001) /*!< External interrupt line 0 */ #define EXTI_Line1 ((uint32_t)0x00002) /*!< External interrupt line 1 */ #define EXTI_Line2 ((uint32_t)0x00004) /*!< External interrupt line 2 */ #define EXTI_Line3 ((uint32_t)0x00008) /*!< External interrupt line 3 */ #define EXTI_Line4 ((uint32_t)0x00010) /*!< External interrupt line 4 */ #define EXTI_Line5 ((uint32_t)0x00020) /*!< External interrupt line 5 */ #define EXTI_Line6 ((uint32_t)0x00040) /*!< External interrupt line 6 */ #define EXTI_Line7 ((uint32_t)0x00080) /*!< External interrupt line 7 */ #define EXTI_Line8 ((uint32_t)0x00100) /*!< External interrupt line 8 */ #define EXTI_Line9 ((uint32_t)0x00200) /*!< External interrupt line 9 */ #define EXTI_Line10 ((uint32_t)0x00400) /*!< External interrupt line 10 */ #define EXTI_Line11 ((uint32_t)0x00800) /*!< External interrupt line 11 */ #define EXTI_Line12 ((uint32_t)0x01000) /*!< External interrupt line 12 */ #define EXTI_Line13 ((uint32_t)0x02000) /*!< External interrupt line 13 */ #define EXTI_Line14 ((uint32_t)0x04000) /*!< External interrupt line 14 */ #define EXTI_Line15 ((uint32_t)0x08000) /*!< External interrupt line 15 */ #define EXTI_Line16 ((uint32_t)0x10000) /*!< External interrupt line 16 Connected to the PVD Output */ #define EXTI_Line17 ((uint32_t)0x20000) /*!< External interrupt line 17 Connected to the RTC Alarm event */ #define EXTI_Line18 ((uint32_t)0x40000) /*!< External interrupt line 18 Connected to the USB Device/USB OTG FS Wakeup from suspend event */ #define EXTI_Line19 ((uint32_t)0x80000) /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */ #define IS_EXTI_LINE(LINE) ((((LINE) & (uint32_t)0xFFF00000) == 0x00) && ((LINE) != (uint16_t)0x00)) #define IS_GET_EXTI_LINE(LINE) (((LINE) == EXTI_Line0) || ((LINE) == EXTI_Line1) || \ ((LINE) == EXTI_Line2) || ((LINE) == EXTI_Line3) || \ ((LINE) == EXTI_Line4) || ((LINE) == EXTI_Line5) || \ ((LINE) == EXTI_Line6) || ((LINE) == EXTI_Line7) || \ ((LINE) == EXTI_Line8) || ((LINE) == EXTI_Line9) || \ ((LINE) == EXTI_Line10) || ((LINE) == EXTI_Line11) || \ ((LINE) == EXTI_Line12) || ((LINE) == EXTI_Line13) || \ ((LINE) == EXTI_Line14) || ((LINE) == EXTI_Line15) || \ ((LINE) == EXTI_Line16) || ((LINE) == EXTI_Line17) || \ ((LINE) == EXTI_Line18) || ((LINE) == EXTI_Line19)) /** * @} */ /** * @} */ /** @defgroup EXTI_Exported_Macros * @{ */ /** * @} */ /** @defgroup EXTI_Exported_Functions * @{ */ void EXTI_DeInit(void); void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct); void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct); void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line); FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line); void EXTI_ClearFlag(uint32_t EXTI_Line); ITStatus EXTI_GetITStatus(uint32_t EXTI_Line); void EXTI_ClearITPendingBit(uint32_t EXTI_Line); #ifdef __cplusplus } #endif #endif /* __STM32F10x_EXTI_H */ /** * @} */ /** * @} */ /** * @} */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/