1
0
mirror of https://github.com/rene-dev/stmbl.git synced 2024-12-21 08:04:19 +00:00
stmbl/lib/STM32F4xx_StdPeriph_Driver-V1.6.0/inc/stm32f4xx_spdifrx.h

263 lines
11 KiB
C

/**
******************************************************************************
* @file stm32f4xx_spdifrx.h
* @author MCD Application Team
* @version V1.6.0
* @date 10-July-2015
* @brief This file contains all the functions prototypes for the SPDIFRX firmware
* library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_SPDIFRX_H
#define __STM32F4xx_SPDIFRX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup SPDIFRX
* @{
*/
#if defined(STM32F446xx)
/* Exported types ------------------------------------------------------------*/
/**
* @brief SPDIFRX Init structure definition
*/
typedef struct
{
uint32_t SPDIFRX_InputSelection; /*!< Specifies the SPDIFRX input selection.
This parameter can be a value of @ref SPDIFRX_Input_Selection */
uint32_t SPDIFRX_Retries; /*!< Specifies the Maximum allowed re-tries during synchronization phase.
This parameter can be a value of @ref SPDIFRX_Max_Retries */
uint32_t SPDIFRX_WaitForActivity; /*!< Specifies the wait for activity on SPDIFRX selected input.
This parameter can be a value of @ref SPDIFRX_Wait_For_Activity. */
uint32_t SPDIFRX_ChannelSelection; /*!< Specifies whether the control flow will take the channel status from channel A or B.
This parameter can be a value of @ref SPDIFRX_Channel_Selection */
uint32_t SPDIFRX_DataFormat; /*!< Specifies the Data samples format (LSB, MSB, ...).
This parameter can be a value of @ref SPDIFRX_Data_Format */
uint32_t SPDIFRX_StereoMode; /*!< Specifies whether the peripheral is in stereo or mono mode.
This parameter can be a value of @ref SPDIFRX_Stereo_Mode */
}SPDIFRX_InitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup SPDIFRX_Exported_Constants
* @{
*/
#define IS_SPDIFRX_PERIPH(PERIPH) (((PERIPH) == SPDIFRX))
/** @defgroup SPDIFRX_Input_Selection SPDIFRX Input Selection
* @{
*/
#define SPDIFRX_Input_IN0 ((uint32_t)0x00000000)
#define SPDIFRX_Input_IN1 ((uint32_t)0x00010000)
#define SPDIFRX_Input_IN2 ((uint32_t)0x00020000)
#define SPDIFRX_Input_IN3 ((uint32_t)0x00030000)
#define IS_SPDIFRX_INPUT_SELECT(INPUT) (((INPUT) == SPDIFRX_Input_IN1) || \
((INPUT) == SPDIFRX_Input_IN2) || \
((INPUT) == SPDIFRX_Input_IN3) || \
((INPUT) == SPDIFRX_Input_IN0))
/**
* @}
*/
/** @defgroup SPDIFRX_Max_Retries SPDIFRX Max Retries
* @{
*/
#define SPDIFRX_1MAX_RETRIES ((uint32_t)0x00000000)
#define SPDIFRX_4MAX_RETRIES ((uint32_t)0x00001000)
#define SPDIFRX_16MAX_RETRIES ((uint32_t)0x00002000)
#define SPDIFRX_64MAX_RETRIES ((uint32_t)0x00003000)
#define IS_SPDIFRX_MAX_RETRIES(RET) (((RET) == SPDIFRX_1MAX_RETRIES) || \
((RET) == SPDIFRX_4MAX_RETRIES) || \
((RET) == SPDIFRX_16MAX_RETRIES) || \
((RET) == SPDIFRX_64MAX_RETRIES))
/**
* @}
*/
/** @defgroup SPDIFRX_Wait_For_Activity SPDIFRX Wait For Activity
* @{
*/
#define SPDIFRX_WaitForActivity_Off ((uint32_t)0x00000000)
#define SPDIFRX_WaitForActivity_On ((uint32_t)SPDIFRX_CR_WFA)
#define IS_SPDIFRX_WAIT_FOR_ACTIVITY(VAL) (((VAL) == SPDIFRX_WaitForActivity_On) || \
((VAL) == SPDIFRX_WaitForActivity_Off))
/**
* @}
*/
/** @defgroup SPDIFRX_ChannelSelection SPDIFRX Channel Selection
* @{
*/
#define SPDIFRX_Select_Channel_A ((uint32_t)0x00000000)
#define SPDIFRX_Select_Channel_B ((uint32_t)SPDIFRX_CR_CHSEL)
#define IS_SPDIFRX_CHANNEL(CHANNEL) (((CHANNEL) == SPDIFRX_Select_Channel_A) || \
((CHANNEL) == SPDIFRX_Select_Channel_B))
/**
* @}
*/
/** @defgroup SPDIFRX_Block_Synchronization SPDIFRX Block Synchronization
* @{
*/
#define SPDIFRX_LSB_DataFormat ((uint32_t)0x00000000)
#define SPDIFRX_MSB_DataFormat ((uint32_t)0x00000010)
#define SPDIFRX_32BITS_DataFormat ((uint32_t)0x00000020)
#define IS_SPDIFRX_DATA_FORMAT(FORMAT) (((FORMAT) == SPDIFRX_LSB_DataFormat) || \
((FORMAT) == SPDIFRX_MSB_DataFormat) || \
((FORMAT) == SPDIFRX_32BITS_DataFormat))
/**
* @}
*/
/** @defgroup SPDIFRX_StereoMode SPDIFRX StereoMode
* @{
*/
#define SPDIFRX_StereoMode_Disabled ((uint32_t)0x00000000)
#define SPDIFRX_StereoMode_Enabled ((uint32_t)SPDIFRX_CR_RXSTEO)
#define IS_STEREO_MODE(MODE) (((MODE) == SPDIFRX_StereoMode_Disabled) || \
((MODE) == SPDIFRX_StereoMode_Enabled))
/**
* @}
*/
/** @defgroup SPDIFRX_State SPDIFRX State
* @{
*/
#define SPDIFRX_STATE_IDLE ((uint32_t)0x00000000)
#define SPDIFRX_STATE_SYNC ((uint32_t)0x00000001)
#define SPDIFRX_STATE_RCV ((uint32_t)SPDIFRX_CR_SPDIFEN)
#define IS_SPDIFRX_STATE(STATE) (((STATE) == SPDIFRX_STATE_IDLE) || \
((STATE) == SPDIFRX_STATE_SYNC) || \
((STATE) == SPDIFRX_STATE_RCV))
/**
* @}
*/
/** @defgroup SPDIFRX_Interrupts_Definition SPDIFRX Interrupts Definition
* @{
*/
#define SPDIFRX_IT_RXNE ((uint32_t)SPDIFRX_IMR_RXNEIE)
#define SPDIFRX_IT_CSRNE ((uint32_t)SPDIFRX_IMR_CSRNEIE)
#define SPDIFRX_IT_PERRIE ((uint32_t)SPDIFRX_IMR_PERRIE)
#define SPDIFRX_IT_OVRIE ((uint32_t)SPDIFRX_IMR_OVRIE)
#define SPDIFRX_IT_SBLKIE ((uint32_t)SPDIFRX_IMR_SBLKIE)
#define SPDIFRX_IT_SYNCDIE ((uint32_t)SPDIFRX_IMR_SYNCDIE)
#define SPDIFRX_IT_IFEIE ((uint32_t)SPDIFRX_IMR_IFEIE )
#define IS_SPDIFRX_CONFIG_IT(IT) (((IT) == SPDIFRX_IT_RXNE) || \
((IT) == SPDIFRX_IT_CSRNE) || \
((IT) == SPDIFRX_IT_PERRIE) || \
((IT) == SPDIFRX_IT_OVRIE) || \
((IT) == SPDIFRX_IT_SBLKIE) || \
((IT) == SPDIFRX_IT_SYNCDIE) || \
((IT) == SPDIFRX_IT_IFEIE))
/**
* @}
*/
/** @defgroup SPDIFRX_Flags_Definition SPDIFRX Flags Definition
* @{
*/
#define SPDIFRX_FLAG_RXNE ((uint32_t)SPDIFRX_SR_RXNE)
#define SPDIFRX_FLAG_CSRNE ((uint32_t)SPDIFRX_SR_CSRNE)
#define SPDIFRX_FLAG_PERR ((uint32_t)SPDIFRX_SR_PERR)
#define SPDIFRX_FLAG_OVR ((uint32_t)SPDIFRX_SR_OVR)
#define SPDIFRX_FLAG_SBD ((uint32_t)SPDIFRX_SR_SBD)
#define SPDIFRX_FLAG_SYNCD ((uint32_t)SPDIFRX_SR_SYNCD)
#define SPDIFRX_FLAG_FERR ((uint32_t)SPDIFRX_SR_FERR)
#define SPDIFRX_FLAG_SERR ((uint32_t)SPDIFRX_SR_SERR)
#define SPDIFRX_FLAG_TERR ((uint32_t)SPDIFRX_SR_TERR)
#define IS_SPDIFRX_FLAG(FLAG) (((FLAG) == SPDIFRX_FLAG_RXNE) || ((FLAG) == SPDIFRX_FLAG_CSRNE) || \
((FLAG) == SPDIFRX_FLAG_PERR) || ((FLAG) == SPDIFRX_FLAG_OVR) || \
((FLAG) == SPDIFRX_SR_SBD) || ((FLAG) == SPDIFRX_SR_SYNCD) || \
((FLAG) == SPDIFRX_SR_FERR) || ((FLAG) == SPDIFRX_SR_SERR) || \
((FLAG) == SPDIFRX_SR_TERR))
#define IS_SPDIFRX_CLEAR_FLAG(FLAG) (((FLAG) == SPDIFRX_FLAG_PERR) || ((FLAG) == SPDIFRX_FLAG_OVR) || \
((FLAG) == SPDIFRX_SR_SBD) || ((FLAG) == SPDIFRX_SR_SYNCD))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the SPDIFRX configuration to the default reset state *****/
void SPDIFRX_DeInit(void);
/* Initialization and Configuration functions *********************************/
void SPDIFRX_Init(SPDIFRX_InitTypeDef* SPDIFRX_InitStruct);
void SPDIFRX_StructInit(SPDIFRX_InitTypeDef* SPDIFRX_InitStruct);
void SPDIFRX_Cmd(uint32_t SPDIFRX_State);
void SPDIFRX_SetPreambleTypeBit(FunctionalState NewState);
void SPDIFRX_SetUserDataChannelStatusBits(FunctionalState NewState);
void SPDIFRX_SetValidityBit(FunctionalState NewState);
void SPDIFRX_SetParityBit(FunctionalState NewState);
/* Data transfers functions ***************************************************/
uint32_t SPDIFRX_ReceiveData(void);
/* DMA transfers management functions *****************************************/
void SPDIFRX_RxDMACmd(FunctionalState NewState);
void SPDIFRX_CbDMACmd(FunctionalState NewState);
/* Interrupts and flags management functions **********************************/
void SPDIFRX_ITConfig(uint32_t SPDIFRX_IT, FunctionalState NewState);
FlagStatus SPDIFRX_GetFlagStatus(uint32_t SPDIFRX_FLAG);
void SPDIFRX_ClearFlag(uint32_t SPDIFRX_FLAG);
ITStatus SPDIFRX_GetITStatus(uint32_t SPDIFRX_IT);
void SPDIFRX_ClearITPendingBit(uint32_t SPDIFRX_IT);
#endif /* STM32F446xx */
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /*__STM32F4xx_SPDIFRX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/