mirror of https://github.com/rene-dev/stmbl.git
773 lines
26 KiB
C
773 lines
26 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f3xx_hal_dac.c
|
|
* @author MCD Application Team
|
|
* @brief DAC HAL module driver.
|
|
* This file provides firmware functions to manage the following
|
|
* functionalities of the Digital to Analog Converter (DAC) peripheral:
|
|
* + Initialization and de-initialization functions
|
|
* + IO operation functions
|
|
* + Peripheral Control functions
|
|
* + Peripheral State and Errors functions
|
|
*
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### DAC Peripheral features #####
|
|
==============================================================================
|
|
[..]
|
|
*** DAC Channels ***
|
|
====================
|
|
[..]
|
|
The device integrates up to 3 12-bit Digital Analog Converters that can
|
|
be used independently or simultaneously (dual mode):
|
|
(#) DAC1 channel1 with DAC1_OUT1 (PA4) as output
|
|
(#) DAC1 channel2 with DAC1_OUT2 (PA5) as output
|
|
(for STM32F3 devices having 2 channels on DAC1)
|
|
(#) DAC2 channel1 with DAC2_OUT1 (PA6) as output
|
|
(for STM32F3 devices having 2 DAC)
|
|
|
|
*** DAC Triggers ***
|
|
====================
|
|
[..]
|
|
Digital to Analog conversion can be non-triggered using DAC_TRIGGER_NONE
|
|
and DAC1_OUT1/DAC1_OUT2/DAC2_OUT1 is available once writing to DHRx register.
|
|
[..]
|
|
Digital to Analog conversion can be triggered by:
|
|
(#) External event: EXTI Line 9 (any GPIOx_PIN_9) using DAC_TRIGGER_EXT_IT9.
|
|
The used pin (GPIOx_PIN_9) must be configured in input mode.
|
|
|
|
(#) Timers TRGO: TIM2, TIM4, TIM5, TIM6, TIM7 and TIM8
|
|
(DAC_TRIGGER_T2_TRGO, DAC_TRIGGER_T4_TRGO...)
|
|
|
|
(#) Software using DAC_TRIGGER_SOFTWARE
|
|
|
|
*** DAC Buffer mode feature ***
|
|
===============================
|
|
[..]
|
|
Each DAC channel integrates an output buffer that can be used to
|
|
reduce the output impedance, and to drive external loads directly
|
|
without having to add an external operational amplifier.
|
|
To enable, the output buffer use
|
|
sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE;
|
|
Or
|
|
An output switch
|
|
(in STM32F303x4, STM32F303x6, STM32F303x8
|
|
c, STM32F334x6, STM32F334x8
|
|
& STM32F334xx).
|
|
To enable, the output switch
|
|
sConfig.DAC_OutputSwitch = DAC_OUTPUTSWITCH_ENABLE;
|
|
[..]
|
|
(@) Refer to the device datasheet for more details about output
|
|
impedance value with and without output buffer.
|
|
|
|
*** GPIO configurations guidelines ***
|
|
=====================
|
|
[..]
|
|
When a DAC channel is used (ex channel1 on PA4) and the other is not
|
|
(ex channel2 on PA5 is configured in Analog and disabled).
|
|
Channel1 may disturb channel2 as coupling effect.
|
|
Note that there is no coupling on channel2 as soon as channel2 is turned on.
|
|
Coupling on adjacent channel could be avoided as follows:
|
|
when unused PA5 is configured as INPUT PULL-UP or DOWN.
|
|
PA5 is configured in ANALOG just before it is turned on.
|
|
|
|
|
|
*** DAC wave generation feature ***
|
|
===================================
|
|
[..]
|
|
Both DAC channels of DAC1 can be used to generate
|
|
note that wave generation is not available in DAC2.
|
|
(#) Noise wave
|
|
(#) Triangle wave
|
|
|
|
Wave generation is NOT available in DAC2.
|
|
|
|
*** DAC data format ***
|
|
=======================
|
|
[..]
|
|
The DAC data format can be:
|
|
(#) 8-bit right alignment using DAC_ALIGN_8B_R
|
|
(#) 12-bit left alignment using DAC_ALIGN_12B_L
|
|
(#) 12-bit right alignment using DAC_ALIGN_12B_R
|
|
|
|
*** DAC data value to voltage correspondance ***
|
|
================================================
|
|
[..]
|
|
The analog output voltage on each DAC channel pin is determined
|
|
by the following equation:
|
|
[..]
|
|
DAC_OUTx = VREF+ * DOR / 4095
|
|
(+) with DOR is the Data Output Register
|
|
[..]
|
|
VEF+ is the input voltage reference (refer to the device datasheet)
|
|
[..]
|
|
e.g. To set DAC_OUT1 to 0.7V, use
|
|
(+) Assuming that VREF+ = 3.3V, DAC_OUT1 = (3.3U * 868U) / 4095U = 0.7V
|
|
|
|
*** DMA requests ***
|
|
=====================
|
|
[..]
|
|
A DMA1 or DMA2 request can be generated when an external trigger
|
|
(but not a software trigger) occurs if DMA1 or DMA2 requests are
|
|
enabled using HAL_DAC_Start_DMA().
|
|
[..]
|
|
DMA1 requests are mapped as following:
|
|
(#) DAC1 channel1: mapped either on
|
|
(++) DMA1 channel3
|
|
(++) or DMA2 channel3 (for STM32F3 devices having 2 DMA)
|
|
which must be already configured
|
|
(#) DAC1 channel2:
|
|
(for STM32F3 devices having 2 channels on DAC1)
|
|
mapped either on
|
|
(++) DMA1 channel4
|
|
(++) or DMA2 channel4 (for STM32F3 devices having 2 DMA)
|
|
which must be already configured
|
|
|
|
(#) DAC2 channel1: mapped either on
|
|
(for STM32F3 devices having 2 DAC)
|
|
(++) DMA1 channel4
|
|
(++) or DMA2 channel4 (for STM32F3 devices having 2 DMA)
|
|
which must be already configured
|
|
|
|
|
|
(@) For Dual mode and specific signal (Triangle and noise) generation please
|
|
refer to Extended Features Driver description
|
|
|
|
##### How to use this driver #####
|
|
==============================================================================
|
|
[..]
|
|
(+) DAC APB clock must be enabled to get write access to DAC
|
|
registers using HAL_DAC_Init()
|
|
(+) Configure DAC_OUTx (DAC_OUT1: PA4, DAC_OUT2: PA5) in analog mode.
|
|
(+) Configure the DAC channel using HAL_DAC_ConfigChannel() function.
|
|
(+) Enable the DAC channel using HAL_DAC_Start() or HAL_DAC_Start_DMA() functions
|
|
|
|
*** Polling mode IO operation ***
|
|
=================================
|
|
[..]
|
|
(+) Start the DAC peripheral using HAL_DAC_Start()
|
|
(+) To read the DAC last data output value, use the HAL_DAC_GetValue() function.
|
|
(+) Stop the DAC peripheral using HAL_DAC_Stop()
|
|
|
|
*** DMA mode IO operation ***
|
|
==============================
|
|
[..]
|
|
(+) Start the DAC peripheral using HAL_DAC_Start_DMA(), at this stage the user specify the length
|
|
of data to be transferred at each end of conversion
|
|
(+) At the middle of data transfer HAL_DAC_ConvHalfCpltCallbackCh1() or HAL_DACEx_ConvHalfCpltCallbackCh2()
|
|
function is executed and user can add his own code by customization of function pointer
|
|
HAL_DAC_ConvHalfCpltCallbackCh1() or HAL_DACEx_ConvHalfCpltCallbackCh2()
|
|
(+) At The end of data transfer HAL_DAC_ConvCpltCallbackCh1() or HAL_DACEx_ConvHalfCpltCallbackCh2()
|
|
function is executed and user can add his own code by customization of function pointer
|
|
HAL_DAC_ConvCpltCallbackCh1() or HAL_DACEx_ConvHalfCpltCallbackCh2()
|
|
(+) In case of transfer Error, HAL_DAC_ErrorCallbackCh1() function is executed and user can
|
|
add his own code by customization of function pointer HAL_DAC_ErrorCallbackCh1
|
|
(+) In case of DMA underrun, DAC interruption triggers and execute internal function HAL_DAC_IRQHandler.
|
|
HAL_DAC_DMAUnderrunCallbackCh1() or HAL_DACEx_DMAUnderrunCallbackCh2()
|
|
function is executed and user can add his own code by customization of function pointer
|
|
HAL_DAC_DMAUnderrunCallbackCh1() or HAL_DACEx_DMAUnderrunCallbackCh2() and
|
|
add his own code by customization of function pointer HAL_DAC_ErrorCallbackCh1()
|
|
(+) Stop the DAC peripheral using HAL_DAC_Stop_DMA()
|
|
|
|
*** DAC HAL driver macros list ***
|
|
=============================================
|
|
[..]
|
|
Below the list of most used macros in DAC HAL driver.
|
|
|
|
(+) __HAL_DAC_ENABLE : Enable the DAC peripheral
|
|
(+) __HAL_DAC_DISABLE : Disable the DAC peripheral
|
|
(+) __HAL_DAC_CLEAR_FLAG: Clear the DAC's pending flags
|
|
(+) __HAL_DAC_GET_FLAG: Get the selected DAC's flag status
|
|
|
|
[..]
|
|
(@) You can refer to the DAC HAL driver header file for more useful macros
|
|
|
|
@endverbatim
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f3xx_hal.h"
|
|
|
|
/** @addtogroup STM32F3xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup DAC DAC
|
|
* @brief DAC HAL module driver
|
|
* @{
|
|
*/
|
|
|
|
#ifdef HAL_DAC_MODULE_ENABLED
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/** @defgroup DAC_Private_Macros DAC Private Macros
|
|
* @{
|
|
*/
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
/** @defgroup DAC_Private_Functions DAC Private Functions
|
|
* @{
|
|
*/
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported functions -------------------------------------------------------*/
|
|
|
|
/** @defgroup DAC_Exported_Functions DAC Exported Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup DAC_Exported_Functions_Group1 Initialization and de-initialization functions
|
|
* @brief Initialization and Configuration functions
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### Initialization and de-initialization functions #####
|
|
==============================================================================
|
|
[..] This section provides functions allowing to:
|
|
(+) Initialize and configure the DAC.
|
|
(+) De-initialize the DAC.
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Initialize the DAC peripheral according to the specified parameters
|
|
* in the DAC_InitStruct and initialize the associated handle.
|
|
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DAC.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef* hdac)
|
|
{
|
|
/* Check DAC handle */
|
|
if(hdac == NULL)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
/* Check the parameters */
|
|
assert_param(IS_DAC_ALL_INSTANCE(hdac->Instance));
|
|
|
|
if(hdac->State == HAL_DAC_STATE_RESET)
|
|
{
|
|
/* Allocate lock resource and initialize it */
|
|
hdac->Lock = HAL_UNLOCKED;
|
|
|
|
/* Init the low level hardware */
|
|
HAL_DAC_MspInit(hdac);
|
|
}
|
|
|
|
/* Initialize the DAC state*/
|
|
hdac->State = HAL_DAC_STATE_BUSY;
|
|
|
|
/* Set DAC error code to none */
|
|
hdac->ErrorCode = HAL_DAC_ERROR_NONE;
|
|
|
|
/* Initialize the DAC state*/
|
|
hdac->State = HAL_DAC_STATE_READY;
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Deinitialize the DAC peripheral registers to their default reset values.
|
|
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DAC.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef* hdac)
|
|
{
|
|
/* Check DAC handle */
|
|
if(hdac == NULL)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_DAC_ALL_INSTANCE(hdac->Instance));
|
|
|
|
/* Change DAC state */
|
|
hdac->State = HAL_DAC_STATE_BUSY;
|
|
|
|
/* DeInit the low level hardware */
|
|
HAL_DAC_MspDeInit(hdac);
|
|
|
|
/* Set DAC error code to none */
|
|
hdac->ErrorCode = HAL_DAC_ERROR_NONE;
|
|
|
|
/* Change DAC state */
|
|
hdac->State = HAL_DAC_STATE_RESET;
|
|
|
|
/* Release Lock */
|
|
__HAL_UNLOCK(hdac);
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Initialize the DAC MSP.
|
|
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DAC.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hdac);
|
|
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_DAC_MspInit could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief DeInitialize the DAC MSP.
|
|
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DAC.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hdac);
|
|
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_DAC_MspDeInit could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup DAC_Exported_Functions_Group2 Input and Output operation functions
|
|
* @brief IO operation functions
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### IO operation functions #####
|
|
==============================================================================
|
|
[..] This section provides functions allowing to:
|
|
(+) Start conversion.
|
|
(+) Stop conversion.
|
|
(+) Start conversion and enable DMA transfer.
|
|
(+) Stop conversion and disable DMA transfer.
|
|
(+) Get result of conversion.
|
|
(+) Get result of dual mode conversion.
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enables DAC and starts conversion of channel.
|
|
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DAC.
|
|
* @param Channel The selected DAC channel.
|
|
* This parameter can be one of the following values:
|
|
* @arg DAC_CHANNEL_1: DAC1 Channel1 selected
|
|
* @arg DAC_CHANNEL_2: DAC1 Channel2 selected
|
|
* @arg DAC_CHANNEL_1: DAC2 Channel1 selected
|
|
* @retval HAL status
|
|
*/
|
|
__weak HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef* hdac, uint32_t Channel)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hdac);
|
|
UNUSED(Channel);
|
|
|
|
/* Note : This function is defined into this file for library reference */
|
|
/* Function content is located into file stm32f3xx_hal_dac_ex.c */
|
|
|
|
/* Return function status */
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/**
|
|
* @brief Disables DAC and stop conversion of channel.
|
|
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DAC.
|
|
* @param Channel The selected DAC channel.
|
|
* This parameter can be one of the following values:
|
|
* @arg DAC_CHANNEL_1: DAC1 Channel1 selected
|
|
* @arg DAC_CHANNEL_2: DAC1 Channel2 selected
|
|
* @arg DAC_CHANNEL_1: DAC2 Channel1 selected
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef* hdac, uint32_t Channel)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_DAC_CHANNEL_INSTANCE(hdac->Instance, Channel));
|
|
|
|
/* Disable the Peripheral */
|
|
__HAL_DAC_DISABLE(hdac, Channel);
|
|
|
|
/* Change DAC state */
|
|
hdac->State = HAL_DAC_STATE_READY;
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Disables DAC and stop conversion of channel.
|
|
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DAC.
|
|
* @param Channel The selected DAC channel.
|
|
* This parameter can be one of the following values:
|
|
* @arg DAC_CHANNEL_1: DAC1 Channel1 selected
|
|
* @arg DAC_CHANNEL_2: DAC1 Channel2 selected
|
|
* @arg DAC_CHANNEL_1: DAC2 Channel1 selected
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel)
|
|
{
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_DAC_CHANNEL_INSTANCE(hdac->Instance, Channel));
|
|
|
|
/* Disable the selected DAC channel DMA request */
|
|
hdac->Instance->CR &= ~(DAC_CR_DMAEN1 << Channel);
|
|
|
|
/* Disable the Peripheral */
|
|
__HAL_DAC_DISABLE(hdac, Channel);
|
|
|
|
/* Disable the DMA channel */
|
|
/* Channel1 is used */
|
|
if (Channel == DAC_CHANNEL_1)
|
|
{
|
|
/* Disable the DMA channel */
|
|
status = HAL_DMA_Abort(hdac->DMA_Handle1);
|
|
|
|
/* Disable the DAC DMA underrun interrupt */
|
|
__HAL_DAC_DISABLE_IT(hdac, DAC_IT_DMAUDR1);
|
|
}
|
|
#if defined(STM32F303xE) || defined(STM32F398xx) || \
|
|
defined(STM32F303xC) || defined(STM32F358xx) || \
|
|
defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
|
|
defined(STM32F373xC) || defined(STM32F378xx)
|
|
|
|
/* For all products including channel 2U */
|
|
/* DAC channel 2 is available on top of DAC channel 1U */
|
|
else /* Channel2 is used for */
|
|
{
|
|
/* Disable the DMA channel */
|
|
status = HAL_DMA_Abort(hdac->DMA_Handle2);
|
|
|
|
/* Disable the DAC DMA underrun interrupt */
|
|
__HAL_DAC_DISABLE_IT(hdac, DAC_IT_DMAUDR2);
|
|
}
|
|
#endif
|
|
|
|
/* Check if DMA Channel effectively disabled */
|
|
if (status != HAL_OK)
|
|
{
|
|
/* Update DAC state machine to error */
|
|
hdac->State = HAL_DAC_STATE_ERROR;
|
|
}
|
|
else
|
|
{
|
|
/* Change DAC state */
|
|
hdac->State = HAL_DAC_STATE_READY;
|
|
}
|
|
|
|
/* Return function status */
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* @brief Returns the last data output value of the selected DAC channel.
|
|
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DAC.
|
|
* @param Channel The selected DAC channel.
|
|
* This parameter can be one of the following values:
|
|
* @arg DAC_CHANNEL_1: DAC1 Channel1 selected
|
|
* @arg DAC_CHANNEL_2: DAC1 Channel2 selected
|
|
* @arg DAC_CHANNEL_1: DAC2 Channel1 selected
|
|
* @retval The selected DAC channel data output value.
|
|
*/
|
|
__weak uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef* hdac, uint32_t Channel)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hdac);
|
|
UNUSED(Channel);
|
|
|
|
/* Note : This function is defined into this file for library reference */
|
|
/* Function content is located into file stm32f3xx_hal_dac_ex.c */
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Returns the last data output value of the selected DAC channel.
|
|
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DAC.
|
|
* @retval The selected DAC channel data output value.
|
|
*/
|
|
__weak uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef* hdac)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hdac);
|
|
|
|
/* Note : This function is defined into this file for library reference */
|
|
/* Function content is located into file stm32f3xx_hal_dac_ex.c */
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup DAC_Exported_Functions_Group3 Peripheral Control functions
|
|
* @brief Peripheral Control functions
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### Peripheral Control functions #####
|
|
==============================================================================
|
|
[..] This section provides functions allowing to:
|
|
(+) Configure channels.
|
|
(+) Configure Triangle wave generation.
|
|
(+) Configure Noise wave generation.
|
|
(+) Set the specified data holding register value for DAC channel.
|
|
(+) Set the specified data holding register value for Dual DAC channels.
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Configures the selected DAC channel.
|
|
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DAC.
|
|
* @param sConfig DAC configuration structure.
|
|
* @param Channel The selected DAC channel.
|
|
* This parameter can be one of the following values:
|
|
* @arg DAC_CHANNEL_1: DAC1 Channel1 selected
|
|
* @arg DAC_CHANNEL_2: DAC1 Channel2 selected
|
|
* @arg DAC_CHANNEL_1: DAC2 Channel1 selected
|
|
* @retval HAL status
|
|
*/
|
|
|
|
__weak HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef* hdac, DAC_ChannelConfTypeDef* sConfig, uint32_t Channel)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hdac);
|
|
UNUSED(sConfig);
|
|
UNUSED(Channel);
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
__weak HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hdac);
|
|
UNUSED(Channel);
|
|
UNUSED(Alignment);
|
|
UNUSED(Data);
|
|
|
|
/* Note : This function is defined into this file for library reference */
|
|
/* Function content is located into file stm32f3xx_hal_dac_ex.c */
|
|
|
|
/* Return function status */
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
__weak HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef* hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hdac);
|
|
UNUSED(Alignment);
|
|
UNUSED(Data1);
|
|
UNUSED(Data2);
|
|
|
|
/* Note : This function is defined into this file for library reference */
|
|
/* Function content is located into file stm32f3xx_hal_dac_ex.c */
|
|
|
|
/* Return function status */
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup DAC_Exported_Functions_Group4 Peripheral State and Error functions
|
|
* @brief DAC Peripheral State and Error functions
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### DAC Peripheral State and Error functions #####
|
|
==============================================================================
|
|
[..]
|
|
This subsection provides functions allowing to
|
|
(+) Check the DAC state.
|
|
(+) Check the DAC Errors.
|
|
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief return the DAC handle state
|
|
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DAC.
|
|
* @retval HAL state
|
|
*/
|
|
HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef* hdac)
|
|
{
|
|
/* Return DAC handle state */
|
|
return hdac->State;
|
|
}
|
|
|
|
/**
|
|
* @brief Return the DAC error code
|
|
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DAC.
|
|
* @retval DAC Error Code
|
|
*/
|
|
uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac)
|
|
{
|
|
return hdac->ErrorCode;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup DAC_Exported_Functions_Group2 Input and Output operation functions
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Conversion complete callback in non blocking mode for Channel1
|
|
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DAC.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef* hdac)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hdac);
|
|
|
|
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
the HAL_DAC_ConvCpltCallback1 could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief Conversion half DMA transfer callback in non blocking mode for Channel1
|
|
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DAC.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef* hdac)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hdac);
|
|
|
|
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
the HAL_DAC_ConvHalfCpltCallbackCh1 could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief Error DAC callback for Channel1.
|
|
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DAC.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hdac);
|
|
|
|
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
the HAL_DAC_ErrorCallback could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief DMA underrun DAC callback for Channel1.
|
|
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DAC.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hdac);
|
|
|
|
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
the HAL_DAC_DMAUnderrunCallbackCh1 could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#endif /* HAL_DAC_MODULE_ENABLED */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|