stmbl/lib/STM32F4xx_StdPeriph_Driver-.../inc/stm32f4xx_dbgmcu.h

110 lines
4.1 KiB
C

/**
******************************************************************************
* @file stm32f4xx_dbgmcu.h
* @author MCD Application Team
* @version V1.6.0
* @date 10-July-2015
* @brief This file contains all the functions prototypes for the DBGMCU firmware library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_DBGMCU_H
#define __STM32F4xx_DBGMCU_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup DBGMCU
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup DBGMCU_Exported_Constants
* @{
*/
#define DBGMCU_SLEEP ((uint32_t)0x00000001)
#define DBGMCU_STOP ((uint32_t)0x00000002)
#define DBGMCU_STANDBY ((uint32_t)0x00000004)
#define IS_DBGMCU_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFFF8) == 0x00) && ((PERIPH) != 0x00))
#define DBGMCU_TIM2_STOP ((uint32_t)0x00000001)
#define DBGMCU_TIM3_STOP ((uint32_t)0x00000002)
#define DBGMCU_TIM4_STOP ((uint32_t)0x00000004)
#define DBGMCU_TIM5_STOP ((uint32_t)0x00000008)
#define DBGMCU_TIM6_STOP ((uint32_t)0x00000010)
#define DBGMCU_TIM7_STOP ((uint32_t)0x00000020)
#define DBGMCU_TIM12_STOP ((uint32_t)0x00000040)
#define DBGMCU_TIM13_STOP ((uint32_t)0x00000080)
#define DBGMCU_TIM14_STOP ((uint32_t)0x00000100)
#define DBGMCU_RTC_STOP ((uint32_t)0x00000400)
#define DBGMCU_WWDG_STOP ((uint32_t)0x00000800)
#define DBGMCU_IWDG_STOP ((uint32_t)0x00001000)
#define DBGMCU_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000)
#define DBGMCU_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00400000)
#define DBGMCU_I2C3_SMBUS_TIMEOUT ((uint32_t)0x00800000)
#define DBGMCU_CAN1_STOP ((uint32_t)0x02000000)
#define DBGMCU_CAN2_STOP ((uint32_t)0x04000000)
#define IS_DBGMCU_APB1PERIPH(PERIPH) ((((PERIPH) & 0xF91FE200) == 0x00) && ((PERIPH) != 0x00))
#define DBGMCU_TIM1_STOP ((uint32_t)0x00000001)
#define DBGMCU_TIM8_STOP ((uint32_t)0x00000002)
#define DBGMCU_TIM9_STOP ((uint32_t)0x00010000)
#define DBGMCU_TIM10_STOP ((uint32_t)0x00020000)
#define DBGMCU_TIM11_STOP ((uint32_t)0x00040000)
#define IS_DBGMCU_APB2PERIPH(PERIPH) ((((PERIPH) & 0xFFF8FFFC) == 0x00) && ((PERIPH) != 0x00))
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
uint32_t DBGMCU_GetREVID(void);
uint32_t DBGMCU_GetDEVID(void);
void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState);
void DBGMCU_APB1PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState);
void DBGMCU_APB2PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_DBGMCU_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/