mirror of
https://github.com/rene-dev/stmbl.git
synced 2024-12-25 10:02:18 +00:00
1529 lines
76 KiB
C
1529 lines
76 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f3xx_ll_dac.h
|
|
* @author MCD Application Team
|
|
* @version V1.3.0
|
|
* @date 01-July-2016
|
|
* @brief Header file of DAC LL module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __STM32F3xx_LL_DAC_H
|
|
#define __STM32F3xx_LL_DAC_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f3xx.h"
|
|
|
|
/** @addtogroup STM32F3xx_LL_Driver
|
|
* @{
|
|
*/
|
|
|
|
#if defined (DAC1) || defined (DAC2)
|
|
|
|
/** @defgroup DAC_LL DAC
|
|
* @{
|
|
*/
|
|
|
|
/* Private types -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
|
|
/* Private constants ---------------------------------------------------------*/
|
|
/** @defgroup DAC_LL_Private_Constants DAC Private Constants
|
|
* @{
|
|
*/
|
|
|
|
/* Internal masks for DAC channels definition */
|
|
/* To select into literal LL_DAC_CHANNEL_x the relevant bits for: */
|
|
/* - channel bits position into register CR */
|
|
/* - channel bits position into register SWTRIG */
|
|
/* - channel register offset of data holding register DHRx */
|
|
/* - channel register offset of data output register DORx */
|
|
#define DAC_CR_CH1_BITOFFSET ((uint32_t) 0U) /* Position of channel bits into registers CR, MCR, CCR, SHHR, SHRR of channel 1 */
|
|
#define DAC_CR_CH2_BITOFFSET ((uint32_t)16U) /* Position of channel bits into registers CR, MCR, CCR, SHHR, SHRR of channel 2 */
|
|
#define DAC_CR_CHX_BITOFFSET_MASK (DAC_CR_CH1_BITOFFSET | DAC_CR_CH2_BITOFFSET)
|
|
|
|
#define DAC_SWTR_CH1 (DAC_SWTRIGR_SWTRIG1) /* Channel bit into register SWTRIGR of channel 1. This bit is into area of LL_DAC_CR_CHx_BITOFFSET but excluded by mask DAC_CR_CHX_BITOFFSET_MASK (done to be enable to trig SW start of both DAC channels simultaneously). */
|
|
#if defined(DAC_CHANNEL2_SUPPORT)
|
|
#define DAC_SWTR_CH2 (DAC_SWTRIGR_SWTRIG2) /* Channel bit into register SWTRIGR of channel 2. This bit is into area of LL_DAC_CR_CHx_BITOFFSET but excluded by mask DAC_CR_CHX_BITOFFSET_MASK (done to be enable to trig SW start of both DAC channels simultaneously). */
|
|
#define DAC_SWTR_CHX_MASK (DAC_SWTR_CH1 | DAC_SWTR_CH2)
|
|
#else
|
|
#define DAC_SWTR_CHX_MASK (DAC_SWTR_CH1)
|
|
#endif /* DAC_CHANNEL2_SUPPORT */
|
|
|
|
#define DAC_REG_DHR12R1_REGOFFSET ((uint32_t)0x00000000U) /* Register DHR12Rx channel 1 taken as reference */
|
|
#define DAC_REG_DHR12L1_REGOFFSET ((uint32_t)0x00100000U) /* Register offset of DHR12Lx channel 1 versus DHR12Rx channel 1 (shifted left of 20 bits) */
|
|
#define DAC_REG_DHR8R1_REGOFFSET ((uint32_t)0x02000000U) /* Register offset of DHR8Rx channel 1 versus DHR12Rx channel 1 (shifted left of 24 bits) */
|
|
#if defined(DAC_CHANNEL2_SUPPORT)
|
|
#define DAC_REG_DHR12R2_REGOFFSET ((uint32_t)0x00030000U) /* Register offset of DHR12Rx channel 2 versus DHR12Rx channel 1 (shifted left of 16 bits) */
|
|
#define DAC_REG_DHR12L2_REGOFFSET ((uint32_t)0x00400000U) /* Register offset of DHR12Lx channel 2 versus DHR12Rx channel 1 (shifted left of 20 bits) */
|
|
#define DAC_REG_DHR8R2_REGOFFSET ((uint32_t)0x05000000U) /* Register offset of DHR8Rx channel 2 versus DHR12Rx channel 1 (shifted left of 24 bits) */
|
|
#endif /* DAC_CHANNEL2_SUPPORT */
|
|
#define DAC_REG_DHR12RX_REGOFFSET_MASK ((uint32_t)0x000F0000U)
|
|
#define DAC_REG_DHR12LX_REGOFFSET_MASK ((uint32_t)0x00F00000U)
|
|
#define DAC_REG_DHR8RX_REGOFFSET_MASK ((uint32_t)0x0F000000U)
|
|
#define DAC_REG_DHRX_REGOFFSET_MASK (DAC_REG_DHR12RX_REGOFFSET_MASK | DAC_REG_DHR12LX_REGOFFSET_MASK | DAC_REG_DHR8RX_REGOFFSET_MASK)
|
|
|
|
#define DAC_REG_DOR1_REGOFFSET ((uint32_t)0x00000000U) /* Register DORx channel 1 taken as reference */
|
|
#if defined(DAC_CHANNEL2_SUPPORT)
|
|
#define DAC_REG_DOR2_REGOFFSET ((uint32_t)0x10000000U)/* Register offset of DORx channel 1 versus DORx channel 2 (shifted left of 28 bits) */
|
|
#define DAC_REG_DORX_REGOFFSET_MASK (DAC_REG_DOR1_REGOFFSET | DAC_REG_DOR2_REGOFFSET)
|
|
#else
|
|
#define DAC_REG_DORX_REGOFFSET_MASK (DAC_REG_DOR1_REGOFFSET)
|
|
#endif /* DAC_CHANNEL2_SUPPORT */
|
|
|
|
/* DAC registers bits positions */
|
|
#if defined(DAC_CHANNEL2_SUPPORT)
|
|
#define DAC_DHR12RD_DACC2DHR_BITOFFSET_POS ((uint32_t)16U) /* Value equivalent to POSITION_VAL(DAC_DHR12RD_DACC2DHR) */
|
|
#define DAC_DHR12LD_DACC2DHR_BITOFFSET_POS ((uint32_t)20U) /* Value equivalent to POSITION_VAL(DAC_DHR12LD_DACC2DHR) */
|
|
#define DAC_DHR8RD_DACC2DHR_BITOFFSET_POS ((uint32_t) 8U) /* Value equivalent to POSITION_VAL(DAC_DHR8RD_DACC2DHR) */
|
|
#endif /* DAC_CHANNEL2_SUPPORT */
|
|
|
|
/* Miscellaneous data */
|
|
#define DAC_DIGITAL_SCALE_12BITS ((uint32_t)4095U) /* Full-scale digital value with a resolution of 12 bits (voltage range determined by analog voltage references Vref+ and Vref-, refer to reference manual) */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/* Private macros ------------------------------------------------------------*/
|
|
/** @defgroup DAC_LL_Private_Macros DAC Private Macros
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Driver macro reserved for internal use: isolate bits with the
|
|
* selected mask and shift them to the register LSB
|
|
* (shift mask on register position bit 0).
|
|
* @param __BITS__ Bits in register 32 bits
|
|
* @param __MASK__ Mask in register 32 bits
|
|
* @retval Bits in register 32 bits
|
|
*/
|
|
#define __DAC_MASK_SHIFT(__BITS__, __MASK__) \
|
|
(((__BITS__) & (__MASK__)) >> POSITION_VAL((__MASK__)))
|
|
|
|
/**
|
|
* @brief Driver macro reserved for internal use: set a pointer to
|
|
* a register from a register basis from which an offset
|
|
* is applied.
|
|
* @param __REG__ Register basis from which the offset is applied.
|
|
* @param __REG_OFFFSET__ Offset to be applied (unit: number of registers).
|
|
* @retval Pointer to register address
|
|
*/
|
|
#define __DAC_PTR_REG_OFFSET(__REG__, __REG_OFFFSET__) \
|
|
((uint32_t *)((uint32_t) ((uint32_t)(&(__REG__)) + ((__REG_OFFFSET__) << 2U))))
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
#if defined(USE_FULL_LL_DRIVER)
|
|
/** @defgroup DAC_LL_ES_INIT DAC Exported Init structure
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Structure definition of some features of DAC instance.
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t TriggerSource; /*!< Set the conversion trigger source for the selected DAC channel: internal (SW start) or from external IP (timer event, external interrupt line).
|
|
This parameter can be a value of @ref DAC_LL_EC_TRIGGER_SOURCE
|
|
|
|
This feature can be modified afterwards using unitary function @ref LL_DAC_SetTriggerSource(). */
|
|
|
|
uint32_t WaveAutoGeneration; /*!< Set the waveform automatic generation mode for the selected DAC channel.
|
|
This parameter can be a value of @ref DAC_LL_EC_WAVE_AUTO_GENERATION_MODE
|
|
|
|
This feature can be modified afterwards using unitary function @ref LL_DAC_SetWaveAutoGeneration(). */
|
|
|
|
uint32_t WaveAutoGenerationConfig; /*!< Set the waveform automatic generation mode for the selected DAC channel.
|
|
If waveform automatic generation mode is set to noise, this parameter can be a value of @ref DAC_LL_EC_WAVE_NOISE_LFSR_UNMASK_BITS
|
|
If waveform automatic generation mode is set to triangle, this parameter can be a value of @ref DAC_LL_EC_WAVE_TRIANGLE_AMPLITUDE
|
|
@note If waveform automatic generation mode is disabled, this parameter is discarded.
|
|
|
|
This feature can be modified afterwards using unitary function @ref LL_DAC_SetWaveNoiseLFSR() or @ref LL_DAC_SetWaveTriangleAmplitude(), depending on the wave automatic generation selected. */
|
|
|
|
uint32_t OutputBuffer; /*!< Set the output buffer for the selected DAC channel.
|
|
This parameter can be a value of @ref DAC_LL_EC_OUTPUT_BUFFER
|
|
|
|
This feature can be modified afterwards using unitary function @ref LL_DAC_SetOutputBuffer(). */
|
|
|
|
} LL_DAC_InitTypeDef;
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* USE_FULL_LL_DRIVER */
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
/** @defgroup DAC_LL_Exported_Constants DAC Exported Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup DAC_LL_EC_GET_FLAG DAC flags
|
|
* @brief Flags defines which can be used with LL_DAC_ReadReg function
|
|
* @{
|
|
*/
|
|
/* DAC channel 1 flags */
|
|
#define LL_DAC_FLAG_DMAUDR1 (DAC_SR_DMAUDR1) /*!< DAC channel 1 flag DMA underrun */
|
|
|
|
#if defined(DAC_CHANNEL2_SUPPORT)
|
|
/* DAC channel 2 flags */
|
|
#define LL_DAC_FLAG_DMAUDR2 (DAC_SR_DMAUDR2) /*!< DAC channel 2 flag DMA underrun */
|
|
#endif /* DAC_CHANNEL2_SUPPORT */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup DAC_LL_EC_IT DAC interruptions
|
|
* @brief IT defines which can be used with LL_DAC_ReadReg and LL_DAC_WriteReg functions
|
|
* @{
|
|
*/
|
|
#define LL_DAC_IT_DMAUDRIE1 (DAC_CR_DMAUDRIE1) /*!< DAC channel 1 interruption DMA underrun */
|
|
#if defined(DAC_CHANNEL2_SUPPORT)
|
|
#define LL_DAC_IT_DMAUDRIE2 (DAC_CR_DMAUDRIE2) /*!< DAC channel 2 interruption DMA underrun */
|
|
#endif /* DAC_CHANNEL2_SUPPORT */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup DAC_LL_EC_CHANNEL DAC channels
|
|
* @{
|
|
*/
|
|
#define LL_DAC_CHANNEL_1 (DAC_REG_DOR1_REGOFFSET | DAC_REG_DHR12R1_REGOFFSET | DAC_REG_DHR12L1_REGOFFSET | DAC_REG_DHR8R1_REGOFFSET | DAC_CR_CH1_BITOFFSET | DAC_SWTR_CH1) /*!< DAC channel 1 */
|
|
#if defined(DAC_CHANNEL2_SUPPORT)
|
|
#define LL_DAC_CHANNEL_2 (DAC_REG_DOR2_REGOFFSET | DAC_REG_DHR12R2_REGOFFSET | DAC_REG_DHR12L2_REGOFFSET | DAC_REG_DHR8R2_REGOFFSET | DAC_CR_CH2_BITOFFSET | DAC_SWTR_CH2) /*!< DAC channel 2 */
|
|
#endif /* DAC_CHANNEL2_SUPPORT */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup DAC_LL_EC_TRIGGER_SOURCE DAC trigger source
|
|
* @{
|
|
*/
|
|
#define LL_DAC_TRIG_SOFTWARE (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger internal (SW start) */
|
|
#if defined(STM32F303xE) || defined(STM32F398xx) || defined(STM32F303xC) || defined(STM32F358xx)
|
|
#define LL_DAC_TRIG_EXT_TIM6_TRGO ((uint32_t)0x00000000U) /*!< DAC channel conversion trigger from external IP: TIM6 TRGO. */
|
|
#define LL_DAC_TRIG_EXT_TIM3_TRGO ( DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external IP: TIM3 TRGO. Trigger remap: by default, default trigger. If needed to restore trigger, use @ref LL_SYSCFG_DAC1_TRIG1_REMAP_TIM3_TRGO for TIM3 selection. */
|
|
#define LL_DAC_TRIG_EXT_TIM7_TRGO ( DAC_CR_TSEL1_1 ) /*!< DAC channel conversion trigger from external IP: TIM7 TRGO. */
|
|
#define LL_DAC_TRIG_EXT_TIM15_TRGO ( DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external IP: TIM5 TRGO. */
|
|
#define LL_DAC_TRIG_EXT_TIM2_TRGO (DAC_CR_TSEL1_2 ) /*!< DAC channel conversion trigger from external IP: TIM2 TRGO. */
|
|
#define LL_DAC_TRIG_EXT_TIM4_TRGO (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external IP: TIM4 TRGO. */
|
|
#define LL_DAC_TRIG_EXT_TIM8_TRGO (LL_DAC_TRIG_EXT_TIM3_TRGO) /*!< DAC channel conversion trigger from external IP: TIM8 TRGO. Trigger remap: use @ref LL_SYSCFG_DAC1_TRIG1_REMAP_TIM8_TRGO for TIM8 selection. */
|
|
#define LL_DAC_TRIG_EXT_EXTI_LINE9 (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 ) /*!< DAC channel conversion trigger from external IP: external interrupt line 9. */
|
|
|
|
#elif defined(STM32F303x8) || defined(STM32F328xx)
|
|
#define LL_DAC_TRIG_EXT_TIM6_TRGO ((uint32_t)0x00000000U) /*!< DAC channel conversion trigger from external IP: TIM6 TRGO. */
|
|
#define LL_DAC_TRIG_EXT_TIM3_TRGO ( DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external IP: TIM3 TRGO. */
|
|
#define LL_DAC_TRIG_EXT_TIM7_TRGO ( DAC_CR_TSEL1_1 ) /*!< DAC channel conversion trigger from external IP: TIM7 TRGO. */
|
|
#define LL_DAC_TRIG_EXT_TIM15_TRGO ( DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external IP: TIM5 TRGO. */
|
|
#define LL_DAC_TRIG_EXT_TIM2_TRGO (DAC_CR_TSEL1_2 ) /*!< DAC channel conversion trigger from external IP: TIM2 TRGO. */
|
|
#define LL_DAC_TRIG_EXT_EXTI_LINE9 (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 ) /*!< DAC channel conversion trigger from external IP: external interrupt line 9. */
|
|
|
|
#elif defined(STM32F302xE) || defined(STM32F302xC) || defined(STM32F302x8)
|
|
#define LL_DAC_TRIG_EXT_TIM6_TRGO ((uint32_t)0x00000000U) /*!< DAC channel conversion trigger from external IP: TIM6 TRGO. */
|
|
#define LL_DAC_TRIG_EXT_TIM3_TRGO ( DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external IP: TIM3 TRGO. */
|
|
#define LL_DAC_TRIG_EXT_TIM15_TRGO ( DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external IP: TIM5 TRGO. */
|
|
#define LL_DAC_TRIG_EXT_TIM2_TRGO (DAC_CR_TSEL1_2 ) /*!< DAC channel conversion trigger from external IP: TIM2 TRGO. */
|
|
#define LL_DAC_TRIG_EXT_TIM4_TRGO (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0 ) /*!< DAC channel conversion trigger from external IP: TIM4 TRGO. */
|
|
#define LL_DAC_TRIG_EXT_EXTI_LINE9 (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 ) /*!< DAC channel conversion trigger from external IP: external interrupt line 9. */
|
|
|
|
#elif defined(STM32F301x8) || defined(STM32F318xx)
|
|
#define LL_DAC_TRIG_EXT_TIM6_TRGO ((uint32_t)0x00000000U) /*!< DAC channel conversion trigger from external IP: TIM6 TRGO. */
|
|
#define LL_DAC_TRIG_EXT_TIM2_TRGO (DAC_CR_TSEL1_2 ) /*!< DAC channel conversion trigger from external IP: TIM2 TRGO. */
|
|
#define LL_DAC_TRIG_EXT_TIM15_TRGO ( DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external IP: TIM5 TRGO. */
|
|
#define LL_DAC_TRIG_EXT_EXTI_LINE9 (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 ) /*!< DAC channel conversion trigger from external IP: external interrupt line 9. */
|
|
|
|
#elif defined(STM32F373xC) || defined(STM32F378xx)
|
|
#define LL_DAC_TRIG_EXT_TIM6_TRGO ((uint32_t)0x00000000U) /*!< DAC channel conversion trigger from external IP: TIM6 TRGO. */
|
|
#define LL_DAC_TRIG_EXT_TIM3_TRGO ( DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external IP: TIM3 TRGO. */
|
|
#define LL_DAC_TRIG_EXT_TIM7_TRGO ( DAC_CR_TSEL1_1 ) /*!< DAC channel conversion trigger from external IP: TIM7 TRGO. */
|
|
#define LL_DAC_TRIG_EXT_TIM5_TRGO ( DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external IP: TIM5 TRGO. */
|
|
#define LL_DAC_TRIG_EXT_TIM2_TRGO (DAC_CR_TSEL1_2 ) /*!< DAC channel conversion trigger from external IP: TIM2 TRGO. */
|
|
#define LL_DAC_TRIG_EXT_TIM4_TRGO (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external IP: TIM4 TRGO. */
|
|
#define LL_DAC_TRIG_EXT_TIM18_TRGO (LL_DAC_TRIG_EXT_TIM5_TRGO) /*!< DAC channel conversion trigger from external IP: TIM18 TRGO. */
|
|
#define LL_DAC_TRIG_EXT_EXTI_LINE9 (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 ) /*!< DAC channel conversion trigger from external IP: external interrupt line 9. */
|
|
|
|
#elif defined(STM32F334x8)
|
|
#define LL_DAC_TRIG_EXT_TIM6_TRGO ((uint32_t)0x00000000U) /*!< DAC channel conversion trigger from external IP: TIM6 TRGO. */
|
|
#define LL_DAC_TRIG_EXT_TIM3_TRGO ( DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external IP: TIM3 TRGO. Trigger remap: by default, default trigger. If needed to restore trigger, use @ref LL_SYSCFG_DAC1_TRIG1_REMAP_TIM3_TRGO for TIM3 selection. */
|
|
#define LL_DAC_TRIG_EXT_TIM7_TRGO ( DAC_CR_TSEL1_1 ) /*!< DAC channel conversion trigger from external IP: TIM7 TRGO. */
|
|
#define LL_DAC_TRIG_EXT_TIM2_TRGO (DAC_CR_TSEL1_2 ) /*!< DAC channel conversion trigger from external IP: TIM2 TRGO. */
|
|
#define LL_DAC_TRIG_EXT_TIM15_TRGO ( DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external IP: TIM15 TRGO. Trigger remap: by default, default trigger. If needed to restore trigger, use @ref LL_SYSCFG_DAC1_TRIG3_REMAP_TIM15_TRGO for TIM15 selection. */
|
|
#define LL_DAC_TRIGGER_HRTIM1_DACTRG1 (LL_DAC_TRIG_EXT_TIM15_TRGO) /*!< DAC channel conversion trigger from external IP: HRTIM1 DACTRG1. Available only on DAC instance: DAC1. Trigger remap: use @ref LL_SYSCFG_DAC1_TRIG3_REMAP_HRTIM1_DAC1_TRIG1 for HRTIM1 TRIG1 selection. */
|
|
#define LL_DAC_TRIGGER_HRTIM1_DACTRG2 (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external IP: HRTIM1 DACTRG2. Available only on DAC instance: DAC2. Trigger remap: use @ref LL_SYSCFG_DAC1_TRIG5_REMAP_HRTIM1_DAC1_TRIG2 for HRTIM1 TRIG2 selection. */
|
|
#define LL_DAC_TRIGGER_HRTIM1_DACTRG3 (LL_DAC_TRIGGER_HRTIM1_DACTRG2) /*!< DAC channel conversion trigger from external IP: HRTIM1 DACTRG3. */
|
|
#define LL_DAC_TRIG_EXT_EXTI_LINE9 (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 ) /*!< DAC channel conversion trigger from external IP: external interrupt line 9. */
|
|
|
|
#endif
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup DAC_LL_EC_WAVE_AUTO_GENERATION_MODE DAC waveform automatic generation mode
|
|
* @{
|
|
*/
|
|
#define LL_DAC_WAVE_AUTO_GENERATION_NONE ((uint32_t)0x00000000U) /*!< DAC channel wave auto generation mode disabled. */
|
|
#define LL_DAC_WAVE_AUTO_GENERATION_NOISE (DAC_CR_WAVE1_0) /*!< DAC channel wave auto generation mode enabled, set generated noise waveform. */
|
|
#define LL_DAC_WAVE_AUTO_GENERATION_TRIANGLE (DAC_CR_WAVE1_1) /*!< DAC channel wave auto generation mode enabled, set generated triangle waveform. */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup DAC_LL_EC_WAVE_NOISE_LFSR_UNMASK_BITS DAC wave generation - Noise LFSR unmask bits
|
|
* @{
|
|
*/
|
|
#define LL_DAC_NOISE_LFSR_UNMASK_BIT0 ((uint32_t)0x00000000U) /*!< Noise wave generation, unmask LFSR bit0, for the selected DAC channel */
|
|
#define LL_DAC_NOISE_LFSR_UNMASK_BITS1_0 ( DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[1:0], for the selected DAC channel */
|
|
#define LL_DAC_NOISE_LFSR_UNMASK_BITS2_0 ( DAC_CR_MAMP1_1 ) /*!< Noise wave generation, unmask LFSR bits[2:0], for the selected DAC channel */
|
|
#define LL_DAC_NOISE_LFSR_UNMASK_BITS3_0 ( DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[3:0], for the selected DAC channel */
|
|
#define LL_DAC_NOISE_LFSR_UNMASK_BITS4_0 ( DAC_CR_MAMP1_2 ) /*!< Noise wave generation, unmask LFSR bits[4:0], for the selected DAC channel */
|
|
#define LL_DAC_NOISE_LFSR_UNMASK_BITS5_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[5:0], for the selected DAC channel */
|
|
#define LL_DAC_NOISE_LFSR_UNMASK_BITS6_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 ) /*!< Noise wave generation, unmask LFSR bits[6:0], for the selected DAC channel */
|
|
#define LL_DAC_NOISE_LFSR_UNMASK_BITS7_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[7:0], for the selected DAC channel */
|
|
#define LL_DAC_NOISE_LFSR_UNMASK_BITS8_0 (DAC_CR_MAMP1_3 ) /*!< Noise wave generation, unmask LFSR bits[8:0], for the selected DAC channel */
|
|
#define LL_DAC_NOISE_LFSR_UNMASK_BITS9_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[9:0], for the selected DAC channel */
|
|
#define LL_DAC_NOISE_LFSR_UNMASK_BITS10_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 ) /*!< Noise wave generation, unmask LFSR bits[10:0], for the selected DAC channel */
|
|
#define LL_DAC_NOISE_LFSR_UNMASK_BITS11_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[11:0], for the selected DAC channel */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup DAC_LL_EC_WAVE_TRIANGLE_AMPLITUDE DAC wave generation - Triangle amplitude
|
|
* @{
|
|
*/
|
|
#define LL_DAC_TRIANGLE_AMPLITUDE_1 ((uint32_t)0x00000000U) /*!< Triangle wave generation, amplitude of 1 LSB of DAC output range, for the selected DAC channel */
|
|
#define LL_DAC_TRIANGLE_AMPLITUDE_3 ( DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 3 LSB of DAC output range, for the selected DAC channel */
|
|
#define LL_DAC_TRIANGLE_AMPLITUDE_7 ( DAC_CR_MAMP1_1 ) /*!< Triangle wave generation, amplitude of 7 LSB of DAC output range, for the selected DAC channel */
|
|
#define LL_DAC_TRIANGLE_AMPLITUDE_15 ( DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 15 LSB of DAC output range, for the selected DAC channel */
|
|
#define LL_DAC_TRIANGLE_AMPLITUDE_31 ( DAC_CR_MAMP1_2 ) /*!< Triangle wave generation, amplitude of 31 LSB of DAC output range, for the selected DAC channel */
|
|
#define LL_DAC_TRIANGLE_AMPLITUDE_63 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 63 LSB of DAC output range, for the selected DAC channel */
|
|
#define LL_DAC_TRIANGLE_AMPLITUDE_127 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 ) /*!< Triangle wave generation, amplitude of 127 LSB of DAC output range, for the selected DAC channel */
|
|
#define LL_DAC_TRIANGLE_AMPLITUDE_255 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 255 LSB of DAC output range, for the selected DAC channel */
|
|
#define LL_DAC_TRIANGLE_AMPLITUDE_511 (DAC_CR_MAMP1_3 ) /*!< Triangle wave generation, amplitude of 512 LSB of DAC output range, for the selected DAC channel */
|
|
#define LL_DAC_TRIANGLE_AMPLITUDE_1023 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 1023 LSB of DAC output range, for the selected DAC channel */
|
|
#define LL_DAC_TRIANGLE_AMPLITUDE_2047 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 ) /*!< Triangle wave generation, amplitude of 2047 LSB of DAC output range, for the selected DAC channel */
|
|
#define LL_DAC_TRIANGLE_AMPLITUDE_4095 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 4095 LSB of DAC output range, for the selected DAC channel */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup DAC_LL_EC_OUTPUT_BUFFER DAC channel output buffer
|
|
* @{
|
|
*/
|
|
#define LL_DAC_OUTPUT_BUFFER_ENABLE ((uint32_t)0x00000000U) /*!< The selected DAC channel output is buffered: higher drive current capability, but also higher current consumption */
|
|
#define LL_DAC_OUTPUT_BUFFER_DISABLE (DAC_CR_BOFF1) /*!< The selected DAC channel output is not buffered: lower drive current capability, but also lower current consumption */
|
|
|
|
#if defined(DAC_CR_OUTEN1) || defined(DAC_CR_OUTEN2)
|
|
#define LL_DAC_OUTPUT_SWITCH_DISABLE (LL_DAC_OUTPUT_BUFFER_ENABLE) /*!< Feature specific to STM32F303x6/8 and STM32F328: On DAC1 channel 2, output buffer is replaced by a switch to connect DAC channel output to pin PA5. On DAC2 channel 1, output buffer is replaced by a switch to connect DAC channel output to pin PA6. Selection of switch disabled: DAC channel output not connected to GPIO. */
|
|
#define LL_DAC_OUTPUT_SWITCH_ENABLE (LL_DAC_OUTPUT_BUFFER_DISABLE) /*!< Feature specific to STM32F303x6/8 and STM32F328: On DAC1 channel 2, output buffer is replaced by a switch to connect DAC channel output to pin PA5. On DAC2 channel 1, output buffer is replaced by a switch to connect DAC channel output to pin PA6. */
|
|
#endif
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/** @defgroup DAC_LL_EC_RESOLUTION DAC channel output resolution
|
|
* @{
|
|
*/
|
|
#define LL_DAC_RESOLUTION_12B ((uint32_t)0x00000000U) /*!< DAC channel resolution 12 bits */
|
|
#define LL_DAC_RESOLUTION_8B ((uint32_t)0x00000002U) /*!< DAC channel resolution 8 bits */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup DAC_LL_EC_REGISTERS DAC registers compliant with specific purpose
|
|
* @{
|
|
*/
|
|
/* List of DAC registers intended to be used (most commonly) with */
|
|
/* DMA transfer. */
|
|
/* Refer to function @ref LL_DAC_DMA_GetRegAddr(). */
|
|
#define LL_DAC_DMA_REG_DATA_12BITS_RIGHT_ALIGNED DAC_REG_DHR12RX_REGOFFSET_MASK /*!< DAC channel data holding register 12 bits right aligned */
|
|
#define LL_DAC_DMA_REG_DATA_12BITS_LEFT_ALIGNED DAC_REG_DHR12LX_REGOFFSET_MASK /*!< DAC channel data holding register 12 bits left aligned */
|
|
#define LL_DAC_DMA_REG_DATA_8BITS_RIGHT_ALIGNED DAC_REG_DHR8RX_REGOFFSET_MASK /*!< DAC channel data holding register 8 bits right aligned */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup DAC_LL_EC_HW_DELAYS Definitions of DAC hardware constraints delays
|
|
* @note Only DAC IP HW delays are defined in DAC LL driver driver,
|
|
* not timeout values.
|
|
* For details on delays values, refer to descriptions in source code
|
|
* above each literal definition.
|
|
* @{
|
|
*/
|
|
|
|
/* Delay for DAC channel voltage settling time from DAC channel startup */
|
|
/* (transition from disable to enable). */
|
|
/* Note: DAC channel startup time depends on board application environment: */
|
|
/* impedance connected to DAC channel output. */
|
|
/* The delay below is specified under conditions: */
|
|
/* - voltage maximum transition (lowest to highest value) */
|
|
/* - until voltage reaches final value +-1LSB */
|
|
/* - DAC channel output buffer enabled */
|
|
/* - load impedance of 5kOhm (min), 50pF (max) */
|
|
/* Literal set to maximum value (refer to device datasheet, */
|
|
/* parameter "tWAKEUP"). */
|
|
/* Unit: us */
|
|
#define LL_DAC_DELAY_STARTUP_VOLTAGE_SETTLING_US ((uint32_t) 15U) /*!< Delay for DAC channel voltage settling time from DAC channel startup (transition from disable to enable) */
|
|
|
|
/* Delay for DAC channel voltage settling time. */
|
|
/* Note: DAC channel startup time depends on board application environment: */
|
|
/* impedance connected to DAC channel output. */
|
|
/* The delay below is specified under conditions: */
|
|
/* - voltage maximum transition (lowest to highest value) */
|
|
/* - until voltage reaches final value +-1LSB */
|
|
/* - DAC channel output buffer enabled */
|
|
/* - load impedance of 5kOhm min, 50pF max */
|
|
/* Literal set to maximum value (refer to device datasheet, */
|
|
/* parameter "tSETTLING"). */
|
|
/* Unit: us */
|
|
#define LL_DAC_DELAY_VOLTAGE_SETTLING_US ((uint32_t) 12U) /*!< Delay for DAC channel voltage settling time */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
/** @defgroup DAC_LL_Exported_Macros DAC Exported Macros
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup DAC_LL_EM_WRITE_READ Common write and read registers macros
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Write a value in DAC register
|
|
* @param __INSTANCE__ DAC Instance
|
|
* @param __REG__ Register to be written
|
|
* @param __VALUE__ Value to be written in the register
|
|
* @retval None
|
|
*/
|
|
#define LL_DAC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
|
|
|
|
/**
|
|
* @brief Read a value in DAC register
|
|
* @param __INSTANCE__ DAC Instance
|
|
* @param __REG__ Register to be read
|
|
* @retval Register value
|
|
*/
|
|
#define LL_DAC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup DAC_LL_EM_HELPER_MACRO DAC helper macro
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Helper macro to get DAC channel number in decimal format
|
|
* from literals LL_DAC_CHANNEL_x.
|
|
* Example:
|
|
* __LL_DAC_CHANNEL_TO_DECIMAL_NB(LL_DAC_CHANNEL_1)
|
|
* will return decimal number "1".
|
|
* @note The input can be a value from functions where a channel
|
|
* number is returned.
|
|
* @param __CHANNEL__ This parameter can be one of the following values:
|
|
* @arg @ref LL_DAC_CHANNEL_1
|
|
* @arg @ref LL_DAC_CHANNEL_2 (1)
|
|
*
|
|
* (1) On this STM32 serie, parameter not available on all devices.
|
|
* Refer to device datasheet for channels availability.
|
|
* @retval 1...2 (value "2" depending on DAC channel 2 availability)
|
|
*/
|
|
#define __LL_DAC_CHANNEL_TO_DECIMAL_NB(__CHANNEL__) \
|
|
((__CHANNEL__) & DAC_SWTR_CHX_MASK)
|
|
|
|
/**
|
|
* @brief Helper macro to get DAC channel in literal format LL_DAC_CHANNEL_x
|
|
* from number in decimal format.
|
|
* Example:
|
|
* __LL_DAC_DECIMAL_NB_TO_CHANNEL(1)
|
|
* will return a data equivalent to "LL_DAC_CHANNEL_1".
|
|
* @note If the input parameter does not correspond to a DAC channel,
|
|
* this macro returns value '0'.
|
|
* @param __DECIMAL_NB__ 1...2 (value "2" depending on DAC channel 2 availability)
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_DAC_CHANNEL_1
|
|
* @arg @ref LL_DAC_CHANNEL_2 (1)
|
|
*
|
|
* (1) On this STM32 serie, parameter not available on all devices.
|
|
* Refer to device datasheet for channels availability.
|
|
*/
|
|
#if defined(DAC_CHANNEL2_SUPPORT)
|
|
#define __LL_DAC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__) \
|
|
(((__DECIMAL_NB__) == 1U) \
|
|
? ( \
|
|
LL_DAC_CHANNEL_1 \
|
|
) \
|
|
: \
|
|
(((__DECIMAL_NB__) == 2U) \
|
|
? ( \
|
|
LL_DAC_CHANNEL_2 \
|
|
) \
|
|
: \
|
|
( \
|
|
0 \
|
|
) \
|
|
) \
|
|
)
|
|
#else
|
|
#define __LL_DAC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__) \
|
|
(((__DECIMAL_NB__) == 1U) \
|
|
? ( \
|
|
LL_DAC_CHANNEL_1 \
|
|
) \
|
|
: \
|
|
( \
|
|
0 \
|
|
) \
|
|
)
|
|
#endif /* DAC_CHANNEL2_SUPPORT */
|
|
|
|
/**
|
|
* @brief Helper macro to define the DAC conversion data full-scale digital
|
|
* value corresponding to the selected DAC resolution.
|
|
* @note DAC conversion data full-scale corresponds to voltage range
|
|
* determined by analog voltage references Vref+ and Vref-
|
|
* (refer to reference manual).
|
|
* @param __DAC_RESOLUTION__ This parameter can be one of the following values:
|
|
* @arg @ref LL_DAC_RESOLUTION_12B
|
|
* @arg @ref LL_DAC_RESOLUTION_8B
|
|
* @retval ADC conversion data equivalent voltage value (unit: mVolt)
|
|
*/
|
|
#define __LL_DAC_DIGITAL_SCALE(__DAC_RESOLUTION__) \
|
|
(((uint32_t)0xFFFU) >> ((__DAC_RESOLUTION__) << 1U))
|
|
|
|
/**
|
|
* @brief Helper macro to calculate the DAC conversion data (unit: digital
|
|
* value) corresponding to a voltage (unit: mVolt).
|
|
* @note This helper macro is intended to provide input data in voltage
|
|
* rather than digital value,
|
|
* to be used with LL DAC functions such as
|
|
* @ref LL_DAC_ConvertData12RightAligned().
|
|
* @note Analog reference voltage (Vref+) must be either known from
|
|
* user board environment or can be calculated using ADC measurement
|
|
* and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE().
|
|
* @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit: mV)
|
|
* @param __DAC_VOLTAGE__ Voltage to be generated by DAC channel
|
|
* (unit: mVolt).
|
|
* @param __DAC_RESOLUTION__ This parameter can be one of the following values:
|
|
* @arg @ref LL_DAC_RESOLUTION_12B
|
|
* @arg @ref LL_DAC_RESOLUTION_8B
|
|
* @retval DAC conversion data (unit: digital value)
|
|
*/
|
|
#define __LL_DAC_CALC_VOLTAGE_TO_DATA(__VREFANALOG_VOLTAGE__,\
|
|
__DAC_VOLTAGE__,\
|
|
__DAC_RESOLUTION__) \
|
|
((__DAC_VOLTAGE__) * __LL_DAC_DIGITAL_SCALE(__DAC_RESOLUTION__) \
|
|
/ (__VREFANALOG_VOLTAGE__) \
|
|
)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
/** @defgroup DAC_LL_Exported_Functions DAC Exported Functions
|
|
* @{
|
|
*/
|
|
/** @defgroup DAC_LL_EF_Configuration Configuration of DAC channels
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Set the conversion trigger source for the selected DAC channel.
|
|
* @note For conversion trigger source to be effective, DAC trigger
|
|
* must be enabled using function @ref LL_DAC_EnableTrigger().
|
|
* @note To set conversion trigger source, DAC channel must be disabled.
|
|
* Otherwise, the setting is discarded.
|
|
* @note Availability of parameters of trigger sources from timer
|
|
* depends on timers availability on the selected device.
|
|
* @rmtoll CR TSEL1 LL_DAC_SetTriggerSource\n
|
|
* CR TSEL2 LL_DAC_SetTriggerSource
|
|
* @param DACx DAC instance
|
|
* @param DAC_Channel This parameter can be one of the following values:
|
|
* @arg @ref LL_DAC_CHANNEL_1
|
|
* @arg @ref LL_DAC_CHANNEL_2 (1)
|
|
*
|
|
* (1) On this STM32 serie, parameter not available on all devices.
|
|
* Refer to device datasheet for channels availability.
|
|
* @param TriggerSource This parameter can be one of the following values:
|
|
* @arg @ref LL_DAC_TRIG_SOFTWARE
|
|
* @arg @ref LL_DAC_TRIG_EXT_TIM2_TRGO
|
|
* @arg @ref LL_DAC_TRIG_EXT_TIM3_TRGO (1)
|
|
* @arg @ref LL_DAC_TRIG_EXT_TIM4_TRGO (1)
|
|
* @arg @ref LL_DAC_TRIG_EXT_TIM5_TRGO (1)
|
|
* @arg @ref LL_DAC_TRIG_EXT_TIM6_TRGO
|
|
* @arg @ref LL_DAC_TRIG_EXT_TIM7_TRGO (1)
|
|
* @arg @ref LL_DAC_TRIG_EXT_TIM8_TRGO (1)
|
|
* @arg @ref LL_DAC_TRIG_EXT_TIM15_TRGO (1)
|
|
* @arg @ref LL_DAC_TRIG_EXT_TIM18_TRGO (1)
|
|
* @arg @ref LL_DAC_TRIG_EXT_HRTIM1_DACTRG1 (1)
|
|
* @arg @ref LL_DAC_TRIG_EXT_HRTIM1_DACTRG2 (1)(2)
|
|
* @arg @ref LL_DAC_TRIG_EXT_HRTIM1_DACTRG3 (1) (3)
|
|
* @arg @ref LL_DAC_TRIG_EXT_EXTI_LINE9
|
|
*
|
|
* (1) On STM32F3, parameter not available on all devices
|
|
* (2) On STM32F3, parameter not available on all DAC instances: DAC1 (for DAC instances DACx available on the selected device).\n
|
|
* (3) On STM32F3, parameter not available on all DAC instances: DAC2 (for DAC instances DACx available on the selected device).
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_DAC_SetTriggerSource(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t TriggerSource)
|
|
{
|
|
MODIFY_REG(DACx->CR,
|
|
DAC_CR_TSEL1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK),
|
|
TriggerSource << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK));
|
|
}
|
|
|
|
/**
|
|
* @brief Get the conversion trigger source for the selected DAC channel.
|
|
* @note For conversion trigger source to be effective, DAC trigger
|
|
* must be enabled using function @ref LL_DAC_EnableTrigger().
|
|
* @note Availability of parameters of trigger sources from timer
|
|
* depends on timers availability on the selected device.
|
|
* @rmtoll CR TSEL1 LL_DAC_GetTriggerSource\n
|
|
* CR TSEL2 LL_DAC_GetTriggerSource
|
|
* @param DACx DAC instance
|
|
* @param DAC_Channel This parameter can be one of the following values:
|
|
* @arg @ref LL_DAC_CHANNEL_1
|
|
* @arg @ref LL_DAC_CHANNEL_2 (1)
|
|
*
|
|
* (1) On this STM32 serie, parameter not available on all devices.
|
|
* Refer to device datasheet for channels availability.
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_DAC_TRIG_SOFTWARE
|
|
* @arg @ref LL_DAC_TRIG_EXT_TIM2_TRGO
|
|
* @arg @ref LL_DAC_TRIG_EXT_TIM3_TRGO (1)
|
|
* @arg @ref LL_DAC_TRIG_EXT_TIM4_TRGO (1)
|
|
* @arg @ref LL_DAC_TRIG_EXT_TIM5_TRGO (1)
|
|
* @arg @ref LL_DAC_TRIG_EXT_TIM6_TRGO
|
|
* @arg @ref LL_DAC_TRIG_EXT_TIM7_TRGO (1)
|
|
* @arg @ref LL_DAC_TRIG_EXT_TIM8_TRGO (1)
|
|
* @arg @ref LL_DAC_TRIG_EXT_TIM15_TRGO (1)
|
|
* @arg @ref LL_DAC_TRIG_EXT_TIM18_TRGO (1)
|
|
* @arg @ref LL_DAC_TRIG_EXT_HRTIM1_DACTRG1 (1)
|
|
* @arg @ref LL_DAC_TRIG_EXT_HRTIM1_DACTRG2 (1)(2)
|
|
* @arg @ref LL_DAC_TRIG_EXT_HRTIM1_DACTRG3 (1) (3)
|
|
* @arg @ref LL_DAC_TRIG_EXT_EXTI_LINE9
|
|
*
|
|
* (1) On STM32F3, parameter not available on all devices
|
|
* (2) On STM32F3, parameter not available on all DAC instances: DAC1 (for DAC instances DACx available on the selected device).\n
|
|
* (3) On STM32F3, parameter not available on all DAC instances: DAC2 (for DAC instances DACx available on the selected device).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_DAC_GetTriggerSource(DAC_TypeDef *DACx, uint32_t DAC_Channel)
|
|
{
|
|
return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_TSEL1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK))
|
|
>> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)
|
|
);
|
|
}
|
|
|
|
/**
|
|
* @brief Set the waveform automatic generation mode
|
|
* for the selected DAC channel.
|
|
* @rmtoll CR WAVE1 LL_DAC_SetWaveAutoGeneration\n
|
|
* CR WAVE2 LL_DAC_SetWaveAutoGeneration
|
|
* @param DACx DAC instance
|
|
* @param DAC_Channel This parameter can be one of the following values:
|
|
* @arg @ref LL_DAC_CHANNEL_1
|
|
* @arg @ref LL_DAC_CHANNEL_2 (1)
|
|
*
|
|
* (1) On this STM32 serie, parameter not available on all devices.
|
|
* Refer to device datasheet for channels availability.
|
|
* @param WaveAutoGeneration This parameter can be one of the following values:
|
|
* @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NONE
|
|
* @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NOISE
|
|
* @arg @ref LL_DAC_WAVE_AUTO_GENERATION_TRIANGLE
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_DAC_SetWaveAutoGeneration(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t WaveAutoGeneration)
|
|
{
|
|
MODIFY_REG(DACx->CR,
|
|
DAC_CR_WAVE1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK),
|
|
WaveAutoGeneration << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK));
|
|
}
|
|
|
|
/**
|
|
* @brief Get the waveform automatic generation mode
|
|
* for the selected DAC channel.
|
|
* @rmtoll CR WAVE1 LL_DAC_GetWaveAutoGeneration\n
|
|
* CR WAVE2 LL_DAC_GetWaveAutoGeneration
|
|
* @param DACx DAC instance
|
|
* @param DAC_Channel This parameter can be one of the following values:
|
|
* @arg @ref LL_DAC_CHANNEL_1
|
|
* @arg @ref LL_DAC_CHANNEL_2 (1)
|
|
*
|
|
* (1) On this STM32 serie, parameter not available on all devices.
|
|
* Refer to device datasheet for channels availability.
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NONE
|
|
* @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NOISE
|
|
* @arg @ref LL_DAC_WAVE_AUTO_GENERATION_TRIANGLE
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_DAC_GetWaveAutoGeneration(DAC_TypeDef *DACx, uint32_t DAC_Channel)
|
|
{
|
|
return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_WAVE1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK))
|
|
>> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)
|
|
);
|
|
}
|
|
|
|
/**
|
|
* @brief Set the noise waveform generation for the selected DAC channel:
|
|
* Noise mode and parameters LFSR (linear feedback shift register).
|
|
* @note For wave generation to be effective, DAC channel
|
|
* wave generation mode must be enabled using
|
|
* function @ref LL_DAC_SetWaveAutoGeneration().
|
|
* @note This setting can be set when the selected DAC channel is disabled
|
|
* (otherwise, the setting operation is ignored).
|
|
* @rmtoll CR MAMP1 LL_DAC_SetWaveNoiseLFSR\n
|
|
* CR MAMP2 LL_DAC_SetWaveNoiseLFSR
|
|
* @param DACx DAC instance
|
|
* @param DAC_Channel This parameter can be one of the following values:
|
|
* @arg @ref LL_DAC_CHANNEL_1
|
|
* @arg @ref LL_DAC_CHANNEL_2 (1)
|
|
*
|
|
* (1) On this STM32 serie, parameter not available on all devices.
|
|
* Refer to device datasheet for channels availability.
|
|
* @param NoiseLFSRMask This parameter can be one of the following values:
|
|
* @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BIT0
|
|
* @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS1_0
|
|
* @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS2_0
|
|
* @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS3_0
|
|
* @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS4_0
|
|
* @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS5_0
|
|
* @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS6_0
|
|
* @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS7_0
|
|
* @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS8_0
|
|
* @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS9_0
|
|
* @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS10_0
|
|
* @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS11_0
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_DAC_SetWaveNoiseLFSR(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t NoiseLFSRMask)
|
|
{
|
|
MODIFY_REG(DACx->CR,
|
|
DAC_CR_MAMP1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK),
|
|
NoiseLFSRMask << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK));
|
|
}
|
|
|
|
/**
|
|
* @brief Set the noise waveform generation for the selected DAC channel:
|
|
* Noise mode and parameters LFSR (linear feedback shift register).
|
|
* @rmtoll CR MAMP1 LL_DAC_GetWaveNoiseLFSR\n
|
|
* CR MAMP2 LL_DAC_GetWaveNoiseLFSR
|
|
* @param DACx DAC instance
|
|
* @param DAC_Channel This parameter can be one of the following values:
|
|
* @arg @ref LL_DAC_CHANNEL_1
|
|
* @arg @ref LL_DAC_CHANNEL_2 (1)
|
|
*
|
|
* (1) On this STM32 serie, parameter not available on all devices.
|
|
* Refer to device datasheet for channels availability.
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BIT0
|
|
* @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS1_0
|
|
* @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS2_0
|
|
* @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS3_0
|
|
* @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS4_0
|
|
* @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS5_0
|
|
* @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS6_0
|
|
* @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS7_0
|
|
* @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS8_0
|
|
* @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS9_0
|
|
* @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS10_0
|
|
* @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS11_0
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_DAC_GetWaveNoiseLFSR(DAC_TypeDef *DACx, uint32_t DAC_Channel)
|
|
{
|
|
return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_MAMP1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK))
|
|
>> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)
|
|
);
|
|
}
|
|
|
|
/**
|
|
* @brief Set the triangle waveform generation for the selected DAC channel:
|
|
* triangle mode and amplitude.
|
|
* @note For wave generation to be effective, DAC channel
|
|
* wave generation mode must be enabled using
|
|
* function @ref LL_DAC_SetWaveAutoGeneration().
|
|
* @note This setting can be set when the selected DAC channel is disabled
|
|
* (otherwise, the setting operation is ignored).
|
|
* @rmtoll CR MAMP1 LL_DAC_SetWaveTriangleAmplitude\n
|
|
* CR MAMP2 LL_DAC_SetWaveTriangleAmplitude
|
|
* @param DACx DAC instance
|
|
* @param DAC_Channel This parameter can be one of the following values:
|
|
* @arg @ref LL_DAC_CHANNEL_1
|
|
* @arg @ref LL_DAC_CHANNEL_2 (1)
|
|
*
|
|
* (1) On this STM32 serie, parameter not available on all devices.
|
|
* Refer to device datasheet for channels availability.
|
|
* @param TriangleAmplitude This parameter can be one of the following values:
|
|
* @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1
|
|
* @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_3
|
|
* @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_7
|
|
* @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_15
|
|
* @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_31
|
|
* @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_63
|
|
* @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_127
|
|
* @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_255
|
|
* @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_511
|
|
* @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1023
|
|
* @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_2047
|
|
* @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_4095
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_DAC_SetWaveTriangleAmplitude(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t TriangleAmplitude)
|
|
{
|
|
MODIFY_REG(DACx->CR,
|
|
DAC_CR_MAMP1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK),
|
|
TriangleAmplitude << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK));
|
|
}
|
|
|
|
/**
|
|
* @brief Set the triangle waveform generation for the selected DAC channel:
|
|
* triangle mode and amplitude.
|
|
* @rmtoll CR MAMP1 LL_DAC_GetWaveTriangleAmplitude\n
|
|
* CR MAMP2 LL_DAC_GetWaveTriangleAmplitude
|
|
* @param DACx DAC instance
|
|
* @param DAC_Channel This parameter can be one of the following values:
|
|
* @arg @ref LL_DAC_CHANNEL_1
|
|
* @arg @ref LL_DAC_CHANNEL_2 (1)
|
|
*
|
|
* (1) On this STM32 serie, parameter not available on all devices.
|
|
* Refer to device datasheet for channels availability.
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1
|
|
* @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_3
|
|
* @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_7
|
|
* @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_15
|
|
* @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_31
|
|
* @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_63
|
|
* @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_127
|
|
* @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_255
|
|
* @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_511
|
|
* @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1023
|
|
* @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_2047
|
|
* @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_4095
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_DAC_GetWaveTriangleAmplitude(DAC_TypeDef *DACx, uint32_t DAC_Channel)
|
|
{
|
|
return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_MAMP1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK))
|
|
>> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)
|
|
);
|
|
}
|
|
|
|
/**
|
|
* @brief Set the output buffer for the selected DAC channel.
|
|
* @rmtoll CR BOFF1 LL_DAC_SetOutputBuffer\n
|
|
* CR BOFF2 LL_DAC_SetOutputBuffer
|
|
* @param DACx DAC instance
|
|
* @param DAC_Channel This parameter can be one of the following values:
|
|
* @arg @ref LL_DAC_CHANNEL_1
|
|
* @arg @ref LL_DAC_CHANNEL_2 (1)
|
|
*
|
|
* (1) On this STM32 serie, parameter not available on all devices.
|
|
* Refer to device datasheet for channels availability.
|
|
* @param OutputBuffer This parameter can be one of the following values:
|
|
* @arg @ref LL_DAC_OUTPUT_BUFFER_ENABLE
|
|
* @arg @ref LL_DAC_OUTPUT_BUFFER_DISABLE
|
|
* @arg @ref LL_DAC_OUTPUT_SWITCH_DISABLE (1)
|
|
* @arg @ref LL_DAC_OUTPUT_SWITCH_ENABLE (1)
|
|
*
|
|
* (1) Feature specific to STM32F303x6/8 and STM32F328:
|
|
* On DAC1 channel 2, output buffer is replaced by a switch
|
|
* to connect DAC channel output to pin PA5.
|
|
* On DAC2 channel 1, output buffer is replaced by a switch
|
|
* to connect DAC channel output to pin PA6.
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_DAC_SetOutputBuffer(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t OutputBuffer)
|
|
{
|
|
MODIFY_REG(DACx->CR,
|
|
DAC_CR_BOFF1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK),
|
|
OutputBuffer << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK));
|
|
}
|
|
|
|
/**
|
|
* @brief Get the output buffer state for the selected DAC channel.
|
|
* @rmtoll CR BOFF1 LL_DAC_GetOutputBuffer\n
|
|
* CR BOFF2 LL_DAC_GetOutputBuffer
|
|
* @param DACx DAC instance
|
|
* @param DAC_Channel This parameter can be one of the following values:
|
|
* @arg @ref LL_DAC_CHANNEL_1
|
|
* @arg @ref LL_DAC_CHANNEL_2 (1)
|
|
*
|
|
* (1) On this STM32 serie, parameter not available on all devices.
|
|
* Refer to device datasheet for channels availability.
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_DAC_OUTPUT_BUFFER_ENABLE
|
|
* @arg @ref LL_DAC_OUTPUT_BUFFER_DISABLE
|
|
* @arg @ref LL_DAC_OUTPUT_SWITCH_DISABLE (1)
|
|
* @arg @ref LL_DAC_OUTPUT_SWITCH_ENABLE (1)
|
|
*
|
|
* (1) Feature specific to STM32F303x6/8 and STM32F328:
|
|
* On DAC1 channel 2, output buffer is replaced by a switch
|
|
* to connect DAC channel output to pin PA5.
|
|
* On DAC2 channel 1, output buffer is replaced by a switch
|
|
* to connect DAC channel output to pin PA6.
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_DAC_GetOutputBuffer(DAC_TypeDef *DACx, uint32_t DAC_Channel)
|
|
{
|
|
return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_BOFF1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK))
|
|
>> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)
|
|
);
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup DAC_LL_EF_DMA_Management DMA Management
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enable DAC DMA transfer request of the selected channel.
|
|
* @note To configure DMA source address (peripheral address),
|
|
* use function @ref LL_DAC_DMA_GetRegAddr().
|
|
* @rmtoll CR DMAEN1 LL_DAC_EnableDMAReq\n
|
|
* CR DMAEN2 LL_DAC_EnableDMAReq
|
|
* @param DACx DAC instance
|
|
* @param DAC_Channel This parameter can be one of the following values:
|
|
* @arg @ref LL_DAC_CHANNEL_1
|
|
* @arg @ref LL_DAC_CHANNEL_2 (1)
|
|
*
|
|
* (1) On this STM32 serie, parameter not available on all devices.
|
|
* Refer to device datasheet for channels availability.
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_DAC_EnableDMAReq(DAC_TypeDef *DACx, uint32_t DAC_Channel)
|
|
{
|
|
SET_BIT(DACx->CR,
|
|
DAC_CR_DMAEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK));
|
|
}
|
|
|
|
/**
|
|
* @brief Disable DAC DMA transfer request of the selected channel.
|
|
* @note To configure DMA source address (peripheral address),
|
|
* use function @ref LL_DAC_DMA_GetRegAddr().
|
|
* @rmtoll CR DMAEN1 LL_DAC_DisableDMAReq\n
|
|
* CR DMAEN2 LL_DAC_DisableDMAReq
|
|
* @param DACx DAC instance
|
|
* @param DAC_Channel This parameter can be one of the following values:
|
|
* @arg @ref LL_DAC_CHANNEL_1
|
|
* @arg @ref LL_DAC_CHANNEL_2 (1)
|
|
*
|
|
* (1) On this STM32 serie, parameter not available on all devices.
|
|
* Refer to device datasheet for channels availability.
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_DAC_DisableDMAReq(DAC_TypeDef *DACx, uint32_t DAC_Channel)
|
|
{
|
|
CLEAR_BIT(DACx->CR,
|
|
DAC_CR_DMAEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK));
|
|
}
|
|
|
|
/**
|
|
* @brief Get DAC DMA transfer request state of the selected channel.
|
|
* (0: DAC DMA transfer request is disabled, 1: DAC DMA transfer request is enabled)
|
|
* @rmtoll CR DMAEN1 LL_DAC_IsDMAReqEnabled\n
|
|
* CR DMAEN2 LL_DAC_IsDMAReqEnabled
|
|
* @param DACx DAC instance
|
|
* @param DAC_Channel This parameter can be one of the following values:
|
|
* @arg @ref LL_DAC_CHANNEL_1
|
|
* @arg @ref LL_DAC_CHANNEL_2 (1)
|
|
*
|
|
* (1) On this STM32 serie, parameter not available on all devices.
|
|
* Refer to device datasheet for channels availability.
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_DAC_IsDMAReqEnabled(DAC_TypeDef *DACx, uint32_t DAC_Channel)
|
|
{
|
|
return (READ_BIT(DACx->CR,
|
|
DAC_CR_DMAEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK))
|
|
== (DAC_CR_DMAEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)));
|
|
}
|
|
|
|
/**
|
|
* @brief Function to help to configure DMA transfer to DAC: retrieve the
|
|
* DAC register address from DAC instance and a list of DAC registers
|
|
* intended to be used (most commonly) with DMA transfer.
|
|
* @note These DAC registers are data holding registers:
|
|
* when DAC conversion is requested, DAC generates a DMA transfer
|
|
* request to have data available in DAC data holding registers.
|
|
* @note This macro is intended to be used with LL DMA driver, refer to
|
|
* function "LL_DMA_ConfigAddresses()".
|
|
* Example:
|
|
* LL_DMA_ConfigAddresses(DMA1,
|
|
* LL_DMA_CHANNEL_1,
|
|
* (uint32_t)&< array or variable >,
|
|
* LL_DAC_DMA_GetRegAddr(DAC1, LL_DAC_CHANNEL_1, LL_DAC_DMA_REG_DATA_12BITS_RIGHT_ALIGNED),
|
|
* LL_DMA_DIRECTION_MEMORY_TO_PERIPH);
|
|
* @rmtoll DHR12R1 DACC1DHR LL_DAC_DMA_GetRegAddr\n
|
|
* DHR12L1 DACC1DHR LL_DAC_DMA_GetRegAddr\n
|
|
* DHR8R1 DACC1DHR LL_DAC_DMA_GetRegAddr\n
|
|
* DHR12R2 DACC2DHR LL_DAC_DMA_GetRegAddr\n
|
|
* DHR12L2 DACC2DHR LL_DAC_DMA_GetRegAddr\n
|
|
* DHR8R2 DACC2DHR LL_DAC_DMA_GetRegAddr
|
|
* @param DACx DAC instance
|
|
* @param DAC_Channel This parameter can be one of the following values:
|
|
* @arg @ref LL_DAC_CHANNEL_1
|
|
* @arg @ref LL_DAC_CHANNEL_2 (1)
|
|
*
|
|
* (1) On this STM32 serie, parameter not available on all devices.
|
|
* Refer to device datasheet for channels availability.
|
|
* @param Register This parameter can be one of the following values:
|
|
* @arg @ref LL_DAC_DMA_REG_DATA_12BITS_RIGHT_ALIGNED
|
|
* @arg @ref LL_DAC_DMA_REG_DATA_12BITS_LEFT_ALIGNED
|
|
* @arg @ref LL_DAC_DMA_REG_DATA_8BITS_RIGHT_ALIGNED
|
|
* @retval DAC register address
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_DAC_DMA_GetRegAddr(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t Register)
|
|
{
|
|
/* Retrieve address of register DHR12Rx, DHR12Lx or DHR8Rx depending on */
|
|
/* DAC channel selected. */
|
|
return ((uint32_t)(__DAC_PTR_REG_OFFSET((DACx)->DHR12R1, __DAC_MASK_SHIFT(DAC_Channel, Register))));
|
|
}
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup DAC_LL_EF_Operation Operation on DAC channels
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enable DAC selected channel.
|
|
* @rmtoll CR EN1 LL_DAC_Enable\n
|
|
* CR EN2 LL_DAC_Enable
|
|
* @note After enable from off state, DAC channel requires a delay
|
|
* for output voltage to reach accuracy +/- 1 LSB.
|
|
* Refer to device datasheet, parameter "tWAKEUP".
|
|
* @param DACx DAC instance
|
|
* @param DAC_Channel This parameter can be one of the following values:
|
|
* @arg @ref LL_DAC_CHANNEL_1
|
|
* @arg @ref LL_DAC_CHANNEL_2 (1)
|
|
*
|
|
* (1) On this STM32 serie, parameter not available on all devices.
|
|
* Refer to device datasheet for channels availability.
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_DAC_Enable(DAC_TypeDef *DACx, uint32_t DAC_Channel)
|
|
{
|
|
SET_BIT(DACx->CR,
|
|
DAC_CR_EN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK));
|
|
}
|
|
|
|
/**
|
|
* @brief Disable DAC selected channel.
|
|
* @rmtoll CR EN1 LL_DAC_Disable\n
|
|
* CR EN2 LL_DAC_Disable
|
|
* @param DACx DAC instance
|
|
* @param DAC_Channel This parameter can be one of the following values:
|
|
* @arg @ref LL_DAC_CHANNEL_1
|
|
* @arg @ref LL_DAC_CHANNEL_2 (1)
|
|
*
|
|
* (1) On this STM32 serie, parameter not available on all devices.
|
|
* Refer to device datasheet for channels availability.
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_DAC_Disable(DAC_TypeDef *DACx, uint32_t DAC_Channel)
|
|
{
|
|
CLEAR_BIT(DACx->CR,
|
|
DAC_CR_EN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK));
|
|
}
|
|
|
|
/**
|
|
* @brief Get DAC enable state of the selected channel.
|
|
* (0: DAC channel is disabled, 1: DAC channel is enabled)
|
|
* @rmtoll CR EN1 LL_DAC_IsEnabled\n
|
|
* CR EN2 LL_DAC_IsEnabled
|
|
* @param DACx DAC instance
|
|
* @param DAC_Channel This parameter can be one of the following values:
|
|
* @arg @ref LL_DAC_CHANNEL_1
|
|
* @arg @ref LL_DAC_CHANNEL_2 (1)
|
|
*
|
|
* (1) On this STM32 serie, parameter not available on all devices.
|
|
* Refer to device datasheet for channels availability.
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_DAC_IsEnabled(DAC_TypeDef *DACx, uint32_t DAC_Channel)
|
|
{
|
|
return (READ_BIT(DACx->CR,
|
|
DAC_CR_EN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK))
|
|
== (DAC_CR_EN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)));
|
|
}
|
|
|
|
/**
|
|
* @brief Enable DAC trigger of the selected channel.
|
|
* @note - If DAC trigger is disabled, DAC conversion is performed
|
|
* automatically once the data holding register is updated,
|
|
* using functions "LL_DAC_ConvertData{8; 12}{Right; Left} Aligned()":
|
|
* @ref LL_DAC_ConvertData12RightAligned(), ...
|
|
* - If DAC trigger is enabled, DAC conversion is performed
|
|
* only when a hardware of software trigger event is occurring.
|
|
* Select trigger source using
|
|
* function @ref LL_DAC_SetTriggerSource().
|
|
* @rmtoll CR TEN1 LL_DAC_EnableTrigger\n
|
|
* CR TEN2 LL_DAC_EnableTrigger
|
|
* @param DACx DAC instance
|
|
* @param DAC_Channel This parameter can be one of the following values:
|
|
* @arg @ref LL_DAC_CHANNEL_1
|
|
* @arg @ref LL_DAC_CHANNEL_2 (1)
|
|
*
|
|
* (1) On this STM32 serie, parameter not available on all devices.
|
|
* Refer to device datasheet for channels availability.
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_DAC_EnableTrigger(DAC_TypeDef *DACx, uint32_t DAC_Channel)
|
|
{
|
|
SET_BIT(DACx->CR,
|
|
DAC_CR_TEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK));
|
|
}
|
|
|
|
/**
|
|
* @brief Disable DAC trigger of the selected channel.
|
|
* @rmtoll CR TEN1 LL_DAC_DisableTrigger\n
|
|
* CR TEN2 LL_DAC_DisableTrigger
|
|
* @param DACx DAC instance
|
|
* @param DAC_Channel This parameter can be one of the following values:
|
|
* @arg @ref LL_DAC_CHANNEL_1
|
|
* @arg @ref LL_DAC_CHANNEL_2 (1)
|
|
*
|
|
* (1) On this STM32 serie, parameter not available on all devices.
|
|
* Refer to device datasheet for channels availability.
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_DAC_DisableTrigger(DAC_TypeDef *DACx, uint32_t DAC_Channel)
|
|
{
|
|
CLEAR_BIT(DACx->CR,
|
|
DAC_CR_TEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK));
|
|
}
|
|
|
|
/**
|
|
* @brief Get DAC trigger state of the selected channel.
|
|
* (0: DAC trigger is disabled, 1: DAC trigger is enabled)
|
|
* @rmtoll CR TEN1 LL_DAC_IsTriggerEnabled\n
|
|
* CR TEN2 LL_DAC_IsTriggerEnabled
|
|
* @param DACx DAC instance
|
|
* @param DAC_Channel This parameter can be one of the following values:
|
|
* @arg @ref LL_DAC_CHANNEL_1
|
|
* @arg @ref LL_DAC_CHANNEL_2 (1)
|
|
*
|
|
* (1) On this STM32 serie, parameter not available on all devices.
|
|
* Refer to device datasheet for channels availability.
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_DAC_IsTriggerEnabled(DAC_TypeDef *DACx, uint32_t DAC_Channel)
|
|
{
|
|
return (READ_BIT(DACx->CR,
|
|
DAC_CR_TEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK))
|
|
== (DAC_CR_TEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)));
|
|
}
|
|
|
|
/**
|
|
* @brief Trig DAC conversion by software for the selected DAC channel.
|
|
* @note Preliminarily, DAC trigger must be set to software trigger
|
|
* using function @ref LL_DAC_SetTriggerSource()
|
|
* with parameter "LL_DAC_TRIGGER_SOFTWARE".
|
|
* and DAC trigger must be enabled using
|
|
* function @ref LL_DAC_EnableTrigger().
|
|
* @note For devices featuring DAC with 2 channels: this function
|
|
* can perform a SW start of both DAC channels simultaneously.
|
|
* Two channels can be selected as parameter.
|
|
* Example: (LL_DAC_CHANNEL_1 | LL_DAC_CHANNEL_2)
|
|
* @rmtoll SWTRIGR SWTRIG1 LL_DAC_TrigSWConversion\n
|
|
* SWTRIGR SWTRIG2 LL_DAC_TrigSWConversion
|
|
* @param DACx DAC instance
|
|
* @param DAC_Channel This parameter can a combination of the following values:
|
|
* @arg @ref LL_DAC_CHANNEL_1
|
|
* @arg @ref LL_DAC_CHANNEL_2 (1)
|
|
*
|
|
* (1) On this STM32 serie, parameter not available on all devices.
|
|
* Refer to device datasheet for channels availability.
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_DAC_TrigSWConversion(DAC_TypeDef *DACx, uint32_t DAC_Channel)
|
|
{
|
|
SET_BIT(DACx->SWTRIGR,
|
|
(DAC_Channel & DAC_SWTR_CHX_MASK));
|
|
}
|
|
|
|
/**
|
|
* @brief Set the data to be loaded in the data holding register
|
|
* in format 12 bits left alignment (LSB aligned on bit 0),
|
|
* for the selected DAC channel.
|
|
* @rmtoll DHR12R1 DACC1DHR LL_DAC_ConvertData12RightAligned\n
|
|
* DHR12R2 DACC2DHR LL_DAC_ConvertData12RightAligned
|
|
* @param DACx DAC instance
|
|
* @param DAC_Channel This parameter can be one of the following values:
|
|
* @arg @ref LL_DAC_CHANNEL_1
|
|
* @arg @ref LL_DAC_CHANNEL_2 (1)
|
|
*
|
|
* (1) On this STM32 serie, parameter not available on all devices.
|
|
* Refer to device datasheet for channels availability.
|
|
* @param Data Value between Min_Data=0x000 and Max_Data=0xFFF
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_DAC_ConvertData12RightAligned(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t Data)
|
|
{
|
|
register uint32_t *preg = __DAC_PTR_REG_OFFSET(DACx->DHR12R1, __DAC_MASK_SHIFT(DAC_Channel, DAC_REG_DHR12RX_REGOFFSET_MASK));
|
|
|
|
MODIFY_REG(*preg,
|
|
DAC_DHR12R1_DACC1DHR,
|
|
Data);
|
|
}
|
|
|
|
/**
|
|
* @brief Set the data to be loaded in the data holding register
|
|
* in format 12 bits left alignment (MSB aligned on bit 15),
|
|
* for the selected DAC channel.
|
|
* @rmtoll DHR12L1 DACC1DHR LL_DAC_ConvertData12LeftAligned\n
|
|
* DHR12L2 DACC2DHR LL_DAC_ConvertData12LeftAligned
|
|
* @param DACx DAC instance
|
|
* @param DAC_Channel This parameter can be one of the following values:
|
|
* @arg @ref LL_DAC_CHANNEL_1
|
|
* @arg @ref LL_DAC_CHANNEL_2 (1)
|
|
*
|
|
* (1) On this STM32 serie, parameter not available on all devices.
|
|
* Refer to device datasheet for channels availability.
|
|
* @param Data Value between Min_Data=0x000 and Max_Data=0xFFF
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_DAC_ConvertData12LeftAligned(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t Data)
|
|
{
|
|
register uint32_t *preg = __DAC_PTR_REG_OFFSET(DACx->DHR12R1, __DAC_MASK_SHIFT(DAC_Channel, DAC_REG_DHR12LX_REGOFFSET_MASK));
|
|
|
|
MODIFY_REG(*preg,
|
|
DAC_DHR12L1_DACC1DHR,
|
|
Data);
|
|
}
|
|
|
|
/**
|
|
* @brief Set the data to be loaded in the data holding register
|
|
* in format 8 bits left alignment (LSB aligned on bit 0),
|
|
* for the selected DAC channel.
|
|
* @rmtoll DHR8R1 DACC1DHR LL_DAC_ConvertData8RightAligned\n
|
|
* DHR8R2 DACC2DHR LL_DAC_ConvertData8RightAligned
|
|
* @param DACx DAC instance
|
|
* @param DAC_Channel This parameter can be one of the following values:
|
|
* @arg @ref LL_DAC_CHANNEL_1
|
|
* @arg @ref LL_DAC_CHANNEL_2 (1)
|
|
*
|
|
* (1) On this STM32 serie, parameter not available on all devices.
|
|
* Refer to device datasheet for channels availability.
|
|
* @param Data Value between Min_Data=0x00 and Max_Data=0xFF
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_DAC_ConvertData8RightAligned(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t Data)
|
|
{
|
|
register uint32_t *preg = __DAC_PTR_REG_OFFSET(DACx->DHR12R1, __DAC_MASK_SHIFT(DAC_Channel, DAC_REG_DHR8RX_REGOFFSET_MASK));
|
|
|
|
MODIFY_REG(*preg,
|
|
DAC_DHR8R1_DACC1DHR,
|
|
Data);
|
|
}
|
|
|
|
#if defined(DAC_CHANNEL2_SUPPORT)
|
|
/**
|
|
* @brief Set the data to be loaded in the data holding register
|
|
* in format 12 bits left alignment (LSB aligned on bit 0),
|
|
* for both DAC channels.
|
|
* @rmtoll DHR12RD DACC1DHR LL_DAC_ConvertDualData12RightAligned\n
|
|
* DHR12RD DACC2DHR LL_DAC_ConvertDualData12RightAligned
|
|
* @param DACx DAC instance
|
|
* @param DataChannel1 Value between Min_Data=0x000 and Max_Data=0xFFF
|
|
* @param DataChannel2 Value between Min_Data=0x000 and Max_Data=0xFFF
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_DAC_ConvertDualData12RightAligned(DAC_TypeDef *DACx, uint32_t DataChannel1, uint32_t DataChannel2)
|
|
{
|
|
MODIFY_REG(DACx->DHR12RD,
|
|
(DAC_DHR12RD_DACC2DHR | DAC_DHR12RD_DACC1DHR),
|
|
((DataChannel2 << DAC_DHR12RD_DACC2DHR_BITOFFSET_POS) | DataChannel1));
|
|
}
|
|
|
|
/**
|
|
* @brief Set the data to be loaded in the data holding register
|
|
* in format 12 bits left alignment (MSB aligned on bit 15),
|
|
* for both DAC channels.
|
|
* @rmtoll DHR12LD DACC1DHR LL_DAC_ConvertDualData12LeftAligned\n
|
|
* DHR12LD DACC2DHR LL_DAC_ConvertDualData12LeftAligned
|
|
* @param DACx DAC instance
|
|
* @param DataChannel1 Value between Min_Data=0x000 and Max_Data=0xFFF
|
|
* @param DataChannel2 Value between Min_Data=0x000 and Max_Data=0xFFF
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_DAC_ConvertDualData12LeftAligned(DAC_TypeDef *DACx, uint32_t DataChannel1, uint32_t DataChannel2)
|
|
{
|
|
/* Note: Data of DAC channel 2 shift value subtracted of 4 because */
|
|
/* data on 16 bits and DAC channel 2 bits field is on the 12 MSB, */
|
|
/* the 4 LSB must be taken into account for the shift value. */
|
|
MODIFY_REG(DACx->DHR12LD,
|
|
(DAC_DHR12LD_DACC2DHR | DAC_DHR12LD_DACC1DHR),
|
|
((DataChannel2 << (DAC_DHR12LD_DACC2DHR_BITOFFSET_POS - 4U)) | DataChannel1));
|
|
}
|
|
|
|
/**
|
|
* @brief Set the data to be loaded in the data holding register
|
|
* in format 8 bits left alignment (LSB aligned on bit 0),
|
|
* for both DAC channels.
|
|
* @rmtoll DHR8RD DACC1DHR LL_DAC_ConvertDualData8RightAligned\n
|
|
* DHR8RD DACC2DHR LL_DAC_ConvertDualData8RightAligned
|
|
* @param DACx DAC instance
|
|
* @param DataChannel1 Value between Min_Data=0x00 and Max_Data=0xFF
|
|
* @param DataChannel2 Value between Min_Data=0x00 and Max_Data=0xFF
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_DAC_ConvertDualData8RightAligned(DAC_TypeDef *DACx, uint32_t DataChannel1, uint32_t DataChannel2)
|
|
{
|
|
MODIFY_REG(DACx->DHR8RD,
|
|
(DAC_DHR8RD_DACC2DHR | DAC_DHR8RD_DACC1DHR),
|
|
((DataChannel2 << DAC_DHR8RD_DACC2DHR_BITOFFSET_POS) | DataChannel1));
|
|
}
|
|
|
|
#endif /* DAC_CHANNEL2_SUPPORT */
|
|
/**
|
|
* @brief Retrieve output data currently generated for the selected DAC channel.
|
|
* @note Whatever alignment and resolution settings
|
|
* (using functions "LL_DAC_ConvertData{8; 12}{Right; Left} Aligned()":
|
|
* @ref LL_DAC_ConvertData12RightAligned(), ...),
|
|
* output data format is 12 bits right aligned (LSB aligned on bit 0).
|
|
* @rmtoll DOR1 DACC1DOR LL_DAC_RetrieveOutputData\n
|
|
* DOR2 DACC2DOR LL_DAC_RetrieveOutputData
|
|
* @param DACx DAC instance
|
|
* @param DAC_Channel This parameter can be one of the following values:
|
|
* @arg @ref LL_DAC_CHANNEL_1
|
|
* @arg @ref LL_DAC_CHANNEL_2 (1)
|
|
*
|
|
* (1) On this STM32 serie, parameter not available on all devices.
|
|
* Refer to device datasheet for channels availability.
|
|
* @retval Value between Min_Data=0x000 and Max_Data=0xFFF
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_DAC_RetrieveOutputData(DAC_TypeDef *DACx, uint32_t DAC_Channel)
|
|
{
|
|
register uint32_t *preg = __DAC_PTR_REG_OFFSET(DACx->DOR1, __DAC_MASK_SHIFT(DAC_Channel, DAC_REG_DORX_REGOFFSET_MASK));
|
|
|
|
return (uint16_t) READ_BIT(*preg, DAC_DOR1_DACC1DOR);
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup DAC_LL_EF_FLAG_Management FLAG Management
|
|
* @{
|
|
*/
|
|
/**
|
|
* @brief Get DAC underrun flag for DAC channel 1
|
|
* @rmtoll SR DMAUDR1 LL_DAC_IsActiveFlag_DMAUDR1
|
|
* @param DACx DAC instance
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_DAC_IsActiveFlag_DMAUDR1(DAC_TypeDef *DACx)
|
|
{
|
|
return (READ_BIT(DACx->SR, LL_DAC_FLAG_DMAUDR1) == (LL_DAC_FLAG_DMAUDR1));
|
|
}
|
|
|
|
#if defined(DAC_CHANNEL2_SUPPORT)
|
|
/**
|
|
* @brief Get DAC underrun flag for DAC channel 2
|
|
* @rmtoll SR DMAUDR2 LL_DAC_IsActiveFlag_DMAUDR2
|
|
* @param DACx DAC instance
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_DAC_IsActiveFlag_DMAUDR2(DAC_TypeDef *DACx)
|
|
{
|
|
return (READ_BIT(DACx->SR, LL_DAC_FLAG_DMAUDR2) == (LL_DAC_FLAG_DMAUDR2));
|
|
}
|
|
#endif /* DAC_CHANNEL2_SUPPORT */
|
|
|
|
/**
|
|
* @brief Clear DAC underrun flag for DAC channel 1
|
|
* @rmtoll SR DMAUDR1 LL_DAC_ClearFlag_DMAUDR1
|
|
* @param DACx DAC instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_DAC_ClearFlag_DMAUDR1(DAC_TypeDef *DACx)
|
|
{
|
|
WRITE_REG(DACx->SR, LL_DAC_FLAG_DMAUDR1);
|
|
}
|
|
|
|
#if defined(DAC_CHANNEL2_SUPPORT)
|
|
/**
|
|
* @brief Clear DAC underrun flag for DAC channel 2
|
|
* @rmtoll SR DMAUDR2 LL_DAC_ClearFlag_DMAUDR2
|
|
* @param DACx DAC instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_DAC_ClearFlag_DMAUDR2(DAC_TypeDef *DACx)
|
|
{
|
|
WRITE_REG(DACx->SR, LL_DAC_FLAG_DMAUDR2);
|
|
}
|
|
#endif /* DAC_CHANNEL2_SUPPORT */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup DAC_LL_EF_IT_Management IT management
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enable DMA underrun interrupt for DAC channel 1
|
|
* @rmtoll CR DMAUDRIE1 LL_DAC_EnableIT_DMAUDR1
|
|
* @param DACx DAC instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_DAC_EnableIT_DMAUDR1(DAC_TypeDef *DACx)
|
|
{
|
|
SET_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE1);
|
|
}
|
|
|
|
#if defined(DAC_CHANNEL2_SUPPORT)
|
|
/**
|
|
* @brief Enable DMA underrun interrupt for DAC channel 2
|
|
* @rmtoll CR DMAUDRIE2 LL_DAC_EnableIT_DMAUDR2
|
|
* @param DACx DAC instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_DAC_EnableIT_DMAUDR2(DAC_TypeDef *DACx)
|
|
{
|
|
SET_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE2);
|
|
}
|
|
#endif /* DAC_CHANNEL2_SUPPORT */
|
|
|
|
/**
|
|
* @brief Disable DMA underrun interrupt for DAC channel 1
|
|
* @rmtoll CR DMAUDRIE1 LL_DAC_DisableIT_DMAUDR1
|
|
* @param DACx DAC instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_DAC_DisableIT_DMAUDR1(DAC_TypeDef *DACx)
|
|
{
|
|
CLEAR_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE1);
|
|
}
|
|
|
|
#if defined(DAC_CHANNEL2_SUPPORT)
|
|
/**
|
|
* @brief Disable DMA underrun interrupt for DAC channel 2
|
|
* @rmtoll CR DMAUDRIE2 LL_DAC_DisableIT_DMAUDR2
|
|
* @param DACx DAC instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_DAC_DisableIT_DMAUDR2(DAC_TypeDef *DACx)
|
|
{
|
|
CLEAR_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE2);
|
|
}
|
|
#endif /* DAC_CHANNEL2_SUPPORT */
|
|
|
|
/**
|
|
* @brief Get DMA underrun interrupt for DAC channel 1
|
|
* @rmtoll CR DMAUDRIE1 LL_DAC_IsEnabledIT_DMAUDR1
|
|
* @param DACx DAC instance
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_DAC_IsEnabledIT_DMAUDR1(DAC_TypeDef *DACx)
|
|
{
|
|
return (READ_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE1) == (LL_DAC_IT_DMAUDRIE1));
|
|
}
|
|
|
|
#if defined(DAC_CHANNEL2_SUPPORT)
|
|
/**
|
|
* @brief Get DMA underrun interrupt for DAC channel 2
|
|
* @rmtoll CR DMAUDRIE2 LL_DAC_IsEnabledIT_DMAUDR2
|
|
* @param DACx DAC instance
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_DAC_IsEnabledIT_DMAUDR2(DAC_TypeDef *DACx)
|
|
{
|
|
return (READ_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE2) == (LL_DAC_IT_DMAUDRIE2));
|
|
}
|
|
#endif /* DAC_CHANNEL2_SUPPORT */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#if defined(USE_FULL_LL_DRIVER)
|
|
/** @defgroup DAC_LL_EF_Init Initialization and de-initialization functions
|
|
* @{
|
|
*/
|
|
|
|
ErrorStatus LL_DAC_DeInit(DAC_TypeDef* DACx);
|
|
ErrorStatus LL_DAC_Init(DAC_TypeDef* DACx, uint32_t DAC_Channel, LL_DAC_InitTypeDef* DAC_InitStruct);
|
|
void LL_DAC_StructInit(LL_DAC_InitTypeDef* DAC_InitStruct);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* USE_FULL_LL_DRIVER */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#endif /* DAC1 || DAC2 */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __STM32F3xx_LL_DAC_H */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|