1
0
mirror of https://github.com/rene-dev/stmbl.git synced 2024-12-25 10:02:18 +00:00
stmbl/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_exti.h
2017-01-18 14:38:39 +01:00

1382 lines
51 KiB
C

/**
******************************************************************************
* @file stm32f3xx_ll_exti.h
* @author MCD Application Team
* @version V1.3.0
* @date 01-July-2016
* @brief Header file of EXTI LL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F3xx_LL_EXTI_H
#define __STM32F3xx_LL_EXTI_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f3xx.h"
/** @addtogroup STM32F3xx_LL_Driver
* @{
*/
#if defined (EXTI)
/** @defgroup EXTI_LL EXTI
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private Macros ------------------------------------------------------------*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup EXTI_LL_Private_Macros EXTI Private Macros
* @{
*/
/**
* @}
*/
#endif /*USE_FULL_LL_DRIVER*/
/* Exported types ------------------------------------------------------------*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup EXTI_LL_ES_INIT EXTI Exported Init structure
* @{
*/
typedef struct
{
uint32_t Line_0_31; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 0 to 31
This parameter can be any combination of @ref EXTI_LL_EC_LINE */
#if defined(EXTI_32_63_SUPPORT)
uint32_t Line_32_63; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 32 to 63
This parameter can be any combination of @ref EXTI_LL_EC_LINE */
#endif
FunctionalState LineCommand; /*!< Specifies the new state of the selected EXTI lines.
This parameter can be set either to ENABLE or DISABLE */
uint8_t Mode; /*!< Specifies the mode for the EXTI lines.
This parameter can be a value of @ref EXTI_LL_EC_MODE. */
uint8_t Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines.
This parameter can be a value of @ref EXTI_LL_EC_TRIGGER. */
} LL_EXTI_InitTypeDef;
/**
* @}
*/
#endif /*USE_FULL_LL_DRIVER*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup EXTI_LL_Exported_Constants EXTI Exported Constants
* @{
*/
/** @defgroup EXTI_LL_EC_LINE LINE
* @{
*/
#define LL_EXTI_LINE_0 EXTI_IMR_IM0 /*!< Extended line 0 */
#define LL_EXTI_LINE_1 EXTI_IMR_IM1 /*!< Extended line 1 */
#define LL_EXTI_LINE_2 EXTI_IMR_IM2 /*!< Extended line 2 */
#define LL_EXTI_LINE_3 EXTI_IMR_IM3 /*!< Extended line 3 */
#define LL_EXTI_LINE_4 EXTI_IMR_IM4 /*!< Extended line 4 */
#define LL_EXTI_LINE_5 EXTI_IMR_IM5 /*!< Extended line 5 */
#define LL_EXTI_LINE_6 EXTI_IMR_IM6 /*!< Extended line 6 */
#define LL_EXTI_LINE_7 EXTI_IMR_IM7 /*!< Extended line 7 */
#define LL_EXTI_LINE_8 EXTI_IMR_IM8 /*!< Extended line 8 */
#define LL_EXTI_LINE_9 EXTI_IMR_IM9 /*!< Extended line 9 */
#define LL_EXTI_LINE_10 EXTI_IMR_IM10 /*!< Extended line 10 */
#define LL_EXTI_LINE_11 EXTI_IMR_IM11 /*!< Extended line 11 */
#define LL_EXTI_LINE_12 EXTI_IMR_IM12 /*!< Extended line 12 */
#define LL_EXTI_LINE_13 EXTI_IMR_IM13 /*!< Extended line 13 */
#define LL_EXTI_LINE_14 EXTI_IMR_IM14 /*!< Extended line 14 */
#define LL_EXTI_LINE_15 EXTI_IMR_IM15 /*!< Extended line 15 */
#if defined(EXTI_IMR_IM16)
#define LL_EXTI_LINE_16 EXTI_IMR_IM16 /*!< Extended line 16 */
#endif
#define LL_EXTI_LINE_17 EXTI_IMR_IM17 /*!< Extended line 17 */
#define LL_EXTI_LINE_18 EXTI_IMR_IM18 /*!< Extended line 18 */
#define LL_EXTI_LINE_19 EXTI_IMR_IM19 /*!< Extended line 19 */
#if defined(EXTI_IMR_IM20)
#define LL_EXTI_LINE_20 EXTI_IMR_IM20 /*!< Extended line 20 */
#endif
#if defined(EXTI_IMR_IM21)
#define LL_EXTI_LINE_21 EXTI_IMR_IM21 /*!< Extended line 21 */
#endif
#if defined(EXTI_IMR_IM22)
#define LL_EXTI_LINE_22 EXTI_IMR_IM22 /*!< Extended line 22 */
#endif
#define LL_EXTI_LINE_23 EXTI_IMR_IM23 /*!< Extended line 23 */
#if defined(EXTI_IMR_IM24)
#define LL_EXTI_LINE_24 EXTI_IMR_IM24 /*!< Extended line 24 */
#endif
#if defined(EXTI_IMR_IM25)
#define LL_EXTI_LINE_25 EXTI_IMR_IM25 /*!< Extended line 25 */
#endif
#if defined(EXTI_IMR_IM26)
#define LL_EXTI_LINE_26 EXTI_IMR_IM26 /*!< Extended line 26 */
#endif
#if defined(EXTI_IMR_IM27)
#define LL_EXTI_LINE_27 EXTI_IMR_IM27 /*!< Extended line 27 */
#endif
#if defined(EXTI_IMR_IM28)
#define LL_EXTI_LINE_28 EXTI_IMR_IM28 /*!< Extended line 28 */
#endif
#if defined(EXTI_IMR_IM29)
#define LL_EXTI_LINE_29 EXTI_IMR_IM29 /*!< Extended line 29 */
#endif
#if defined(EXTI_IMR_IM30)
#define LL_EXTI_LINE_30 EXTI_IMR_IM30 /*!< Extended line 30 */
#endif
#if defined(EXTI_IMR_IM31)
#define LL_EXTI_LINE_31 EXTI_IMR_IM31 /*!< Extended line 31 */
#endif
#define LL_EXTI_LINE_ALL_0_31 EXTI_IMR_IM /*!< All Extended line not reserved*/
#if defined(EXTI_32_63_SUPPORT)
#define LL_EXTI_LINE_32 EXTI_IMR2_IM32 /*!< Extended line 32 */
#define LL_EXTI_LINE_33 EXTI_IMR2_IM33 /*!< Extended line 33 */
#define LL_EXTI_LINE_34 EXTI_IMR2_IM34 /*!< Extended line 34 */
#define LL_EXTI_LINE_35 EXTI_IMR2_IM35 /*!< Extended line 35 */
#define LL_EXTI_LINE_36 EXTI_IMR2_IM36 /*!< Extended line 36 */
#define LL_EXTI_LINE_37 EXTI_IMR2_IM37 /*!< Extended line 37 */
#define LL_EXTI_LINE_38 EXTI_IMR2_IM38 /*!< Extended line 38 */
#define LL_EXTI_LINE_39 EXTI_IMR2_IM39 /*!< Extended line 39 */
#define LL_EXTI_LINE_ALL_32_63 EXTI_IMR2_IM /*!< All Extended line not reserved*/
#endif
#define LL_EXTI_LINE_ALL ((uint32_t)0xFFFFFFFFU) /*!< All Extended line */
#if defined(USE_FULL_LL_DRIVER)
#define LL_EXTI_LINE_NONE ((uint32_t)0x00000000U) /*!< None Extended line */
#endif /*USE_FULL_LL_DRIVER*/
/**
* @}
*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup EXTI_LL_EC_MODE Mode
* @{
*/
#define LL_EXTI_MODE_IT ((uint8_t)0x00U) /*!< Interrupt Mode */
#define LL_EXTI_MODE_EVENT ((uint8_t)0x01U) /*!< Event Mode */
#define LL_EXTI_MODE_IT_EVENT ((uint8_t)0x02U) /*!< Interrupt & Event Mode */
/**
* @}
*/
/** @defgroup EXTI_LL_EC_TRIGGER Edge Trigger
* @{
*/
#define LL_EXTI_TRIGGER_NONE ((uint8_t)0x00U) /*!< No Trigger Mode */
#define LL_EXTI_TRIGGER_RISING ((uint8_t)0x01U) /*!< Trigger Rising Mode */
#define LL_EXTI_TRIGGER_FALLING ((uint8_t)0x02U) /*!< Trigger Falling Mode */
#define LL_EXTI_TRIGGER_RISING_FALLING ((uint8_t)0x03U) /*!< Trigger Rising & Falling Mode */
/**
* @}
*/
#endif /*USE_FULL_LL_DRIVER*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup EXTI_LL_Exported_Macros EXTI Exported Macros
* @{
*/
/** @defgroup EXTI_LL_EM_WRITE_READ Common Write and read registers Macros
* @{
*/
/**
* @brief Write a value in EXTI register
* @param __REG__ Register to be written
* @param __VALUE__ Value to be written in the register
* @retval None
*/
#define LL_EXTI_WriteReg(__REG__, __VALUE__) WRITE_REG(EXTI->__REG__, (__VALUE__))
/**
* @brief Read a value in EXTI register
* @param __REG__ Register to be read
* @retval Register value
*/
#define LL_EXTI_ReadReg(__REG__) READ_REG(EXTI->__REG__)
/**
* @}
*/
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup EXTI_LL_Exported_Functions EXTI Exported Functions
* @{
*/
/** @defgroup EXTI_LL_EF_IT_Management IT_Management
* @{
*/
/**
* @brief Enable ExtiLine Interrupt request for Lines in range 0 to 31
* @note The reset value for the direct or internal lines (see RM)
* is set to 1 in order to enable the interrupt by default.
* Bits are set automatically at Power on.
* @rmtoll IMR IMx LL_EXTI_EnableIT_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_23
* @arg @ref LL_EXTI_LINE_24
* @arg @ref LL_EXTI_LINE_25
* @arg @ref LL_EXTI_LINE_26
* @arg @ref LL_EXTI_LINE_27
* @arg @ref LL_EXTI_LINE_28
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableIT_0_31(uint32_t ExtiLine)
{
SET_BIT(EXTI->IMR, ExtiLine);
}
#if defined(EXTI_32_63_SUPPORT)
/**
* @brief Enable ExtiLine Interrupt request for Lines in range 32 to 63
* @note The reset value for the direct lines (lines from 32 to 34, line
* 39) is set to 1 in order to enable the interrupt by default.
* Bits are set automatically at Power on.
* @rmtoll IMR2 IMx LL_EXTI_EnableIT_32_63
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_32
* @arg @ref LL_EXTI_LINE_33
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @arg @ref LL_EXTI_LINE_39
* @arg @ref LL_EXTI_LINE_ALL_32_63
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableIT_32_63(uint32_t ExtiLine)
{
SET_BIT(EXTI->IMR2, ExtiLine);
}
#endif
/**
* @brief Disable ExtiLine Interrupt request for Lines in range 0 to 31
* @note The reset value for the direct or internal lines (see RM)
* is set to 1 in order to enable the interrupt by default.
* Bits are set automatically at Power on.
* @rmtoll IMR IMx LL_EXTI_DisableIT_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_23
* @arg @ref LL_EXTI_LINE_24
* @arg @ref LL_EXTI_LINE_25
* @arg @ref LL_EXTI_LINE_26
* @arg @ref LL_EXTI_LINE_27
* @arg @ref LL_EXTI_LINE_28
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableIT_0_31(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->IMR, ExtiLine);
}
#if defined(EXTI_32_63_SUPPORT)
/**
* @brief Disable ExtiLine Interrupt request for Lines in range 32 to 63
* @note The reset value for the direct lines (lines from 32 to 34, line
* 39) is set to 1 in order to enable the interrupt by default.
* Bits are set automatically at Power on.
* @rmtoll IMR2 IMx LL_EXTI_DisableIT_32_63
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_32
* @arg @ref LL_EXTI_LINE_33
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @arg @ref LL_EXTI_LINE_39
* @arg @ref LL_EXTI_LINE_ALL_32_63
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableIT_32_63(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->IMR2, ExtiLine);
}
#endif
/**
* @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 0 to 31
* @note The reset value for the direct or internal lines (see RM)
* is set to 1 in order to enable the interrupt by default.
* Bits are set automatically at Power on.
* @rmtoll IMR IMx LL_EXTI_IsEnabledIT_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_23
* @arg @ref LL_EXTI_LINE_24
* @arg @ref LL_EXTI_LINE_25
* @arg @ref LL_EXTI_LINE_26
* @arg @ref LL_EXTI_LINE_27
* @arg @ref LL_EXTI_LINE_28
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @note Please check each device line mapping for EXTI Line availability
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine)
{
return (READ_BIT(EXTI->IMR, ExtiLine) == (ExtiLine));
}
#if defined(EXTI_32_63_SUPPORT)
/**
* @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 32 to 63
* @note The reset value for the direct lines (lines from 32 to 34, line
* 39) is set to 1 in order to enable the interrupt by default.
* Bits are set automatically at Power on.
* @rmtoll IMR2 IMx LL_EXTI_IsEnabledIT_32_63
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_32
* @arg @ref LL_EXTI_LINE_33
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @arg @ref LL_EXTI_LINE_39
* @arg @ref LL_EXTI_LINE_ALL_32_63
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_32_63(uint32_t ExtiLine)
{
return (READ_BIT(EXTI->IMR2, ExtiLine) == (ExtiLine));
}
#endif
/**
* @}
*/
/** @defgroup EXTI_LL_EF_Event_Management Event_Management
* @{
*/
/**
* @brief Enable ExtiLine Event request for Lines in range 0 to 31
* @rmtoll EMR EMx LL_EXTI_EnableEvent_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_23
* @arg @ref LL_EXTI_LINE_24
* @arg @ref LL_EXTI_LINE_25
* @arg @ref LL_EXTI_LINE_26
* @arg @ref LL_EXTI_LINE_27
* @arg @ref LL_EXTI_LINE_28
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableEvent_0_31(uint32_t ExtiLine)
{
SET_BIT(EXTI->EMR, ExtiLine);
}
#if defined(EXTI_32_63_SUPPORT)
/**
* @brief Enable ExtiLine Event request for Lines in range 32 to 63
* @rmtoll EMR2 EMx LL_EXTI_EnableEvent_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_32
* @arg @ref LL_EXTI_LINE_33
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @arg @ref LL_EXTI_LINE_39
* @arg @ref LL_EXTI_LINE_ALL_32_63
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableEvent_32_63(uint32_t ExtiLine)
{
SET_BIT(EXTI->EMR2, ExtiLine);
}
#endif
/**
* @brief Disable ExtiLine Event request for Lines in range 0 to 31
* @rmtoll EMR EMx LL_EXTI_DisableEvent_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_23
* @arg @ref LL_EXTI_LINE_24
* @arg @ref LL_EXTI_LINE_25
* @arg @ref LL_EXTI_LINE_26
* @arg @ref LL_EXTI_LINE_27
* @arg @ref LL_EXTI_LINE_28
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableEvent_0_31(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->EMR, ExtiLine);
}
#if defined(EXTI_32_63_SUPPORT)
/**
* @brief Disable ExtiLine Event request for Lines in range 32 to 63
* @rmtoll EMR2 EMx LL_EXTI_DisableEvent_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_32
* @arg @ref LL_EXTI_LINE_33
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @arg @ref LL_EXTI_LINE_39
* @arg @ref LL_EXTI_LINE_ALL_32_63
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableEvent_32_63(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->EMR2, ExtiLine);
}
#endif
/**
* @brief Indicate if ExtiLine Event request is enabled for Lines in range 0 to 31
* @rmtoll EMR EMx LL_EXTI_IsEnabledEvent_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_23
* @arg @ref LL_EXTI_LINE_24
* @arg @ref LL_EXTI_LINE_25
* @arg @ref LL_EXTI_LINE_26
* @arg @ref LL_EXTI_LINE_27
* @arg @ref LL_EXTI_LINE_28
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @note Please check each device line mapping for EXTI Line availability
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_0_31(uint32_t ExtiLine)
{
return (READ_BIT(EXTI->EMR, ExtiLine) == (ExtiLine));
}
#if defined(EXTI_32_63_SUPPORT)
/**
* @brief Indicate if ExtiLine Event request is enabled for Lines in range 32 to 63
* @rmtoll EMR2 EMx LL_EXTI_IsEnabledEvent_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_32
* @arg @ref LL_EXTI_LINE_33
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @arg @ref LL_EXTI_LINE_39
* @arg @ref LL_EXTI_LINE_ALL_32_63
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_32_63(uint32_t ExtiLine)
{
return (READ_BIT(EXTI->EMR2, ExtiLine) == (ExtiLine));
}
#endif
/**
* @}
*/
/** @defgroup EXTI_LL_EF_Rising_Trigger_Management Rising_Trigger_Management
* @{
*/
/**
* @brief Enable ExtiLine Rising Edge Trigger for Lines in range 0 to 31
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a rising edge on a configurable interrupt
* line occurs during a write operation in the EXTI_RTSR register, the
* pending bit is not set.
* Rising and falling edge triggers can be set for
* the same interrupt line. In this case, both generate a trigger
* condition.
* @rmtoll RTSR RTx LL_EXTI_EnableRisingTrig_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableRisingTrig_0_31(uint32_t ExtiLine)
{
SET_BIT(EXTI->RTSR, ExtiLine);
}
#if defined(EXTI_32_63_SUPPORT)
/**
* @brief Enable ExtiLine Rising Edge Trigger for Lines in range 32 to 63
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a rising edge on a configurable interrupt
* line occurs during a write operation in the EXTI_RTSR register, the
* pending bit is not set.Rising and falling edge triggers can be set for
* the same interrupt line. In this case, both generate a trigger
* condition.
* @rmtoll RTSR2 RTx LL_EXTI_EnableRisingTrig_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableRisingTrig_32_63(uint32_t ExtiLine)
{
SET_BIT(EXTI->RTSR2, ExtiLine);
}
#endif
/**
* @brief Disable ExtiLine Rising Edge Trigger for Lines in range 0 to 31
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a rising edge on a configurable interrupt
* line occurs during a write operation in the EXTI_RTSR register, the
* pending bit is not set.
* Rising and falling edge triggers can be set for
* the same interrupt line. In this case, both generate a trigger
* condition.
* @rmtoll RTSR RTx LL_EXTI_DisableRisingTrig_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableRisingTrig_0_31(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->RTSR, ExtiLine);
}
#if defined(EXTI_32_63_SUPPORT)
/**
* @brief Disable ExtiLine Rising Edge Trigger for Lines in range 32 to 63
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a rising edge on a configurable interrupt
* line occurs during a write operation in the EXTI_RTSR register, the
* pending bit is not set.
* Rising and falling edge triggers can be set for
* the same interrupt line. In this case, both generate a trigger
* condition.
* @rmtoll RTSR2 RTx LL_EXTI_DisableRisingTrig_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableRisingTrig_32_63(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->RTSR2, ExtiLine);
}
#endif
/**
* @brief Check if rising edge trigger is enabled for Lines in range 0 to 31
* @rmtoll RTSR RTx LL_EXTI_IsEnabledRisingTrig_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @note Please check each device line mapping for EXTI Line availability
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_0_31(uint32_t ExtiLine)
{
return (READ_BIT(EXTI->RTSR, ExtiLine) == (ExtiLine));
}
#if defined(EXTI_32_63_SUPPORT)
/**
* @brief Check if rising edge trigger is enabled for Lines in range 32 to 63
* @rmtoll RTSR2 RTx LL_EXTI_IsEnabledRisingTrig_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_32_63(uint32_t ExtiLine)
{
return (READ_BIT(EXTI->RTSR2, ExtiLine) == (ExtiLine));
}
#endif
/**
* @}
*/
/** @defgroup EXTI_LL_EF_Falling_Trigger_Management Falling_Trigger_Management
* @{
*/
/**
* @brief Enable ExtiLine Falling Edge Trigger for Lines in range 0 to 31
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a falling edge on a configurable interrupt
* line occurs during a write operation in the EXTI_FTSR register, the
* pending bit is not set.
* Rising and falling edge triggers can be set for
* the same interrupt line. In this case, both generate a trigger
* condition.
* @rmtoll FTSR FTx LL_EXTI_EnableFallingTrig_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableFallingTrig_0_31(uint32_t ExtiLine)
{
SET_BIT(EXTI->FTSR, ExtiLine);
}
#if defined(EXTI_32_63_SUPPORT)
/**
* @brief Enable ExtiLine Falling Edge Trigger for Lines in range 32 to 63
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a Falling edge on a configurable interrupt
* line occurs during a write operation in the EXTI_FTSR register, the
* pending bit is not set.
* Rising and falling edge triggers can be set for
* the same interrupt line. In this case, both generate a trigger
* condition.
* @rmtoll FTSR2 FTx LL_EXTI_EnableFallingTrig_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableFallingTrig_32_63(uint32_t ExtiLine)
{
SET_BIT(EXTI->FTSR2, ExtiLine);
}
#endif
/**
* @brief Disable ExtiLine Falling Edge Trigger for Lines in range 0 to 31
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a Falling edge on a configurable interrupt
* line occurs during a write operation in the EXTI_FTSR register, the
* pending bit is not set.
* Rising and falling edge triggers can be set for the same interrupt line.
* In this case, both generate a trigger condition.
* @rmtoll FTSR FTx LL_EXTI_DisableFallingTrig_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableFallingTrig_0_31(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->FTSR, ExtiLine);
}
#if defined(EXTI_32_63_SUPPORT)
/**
* @brief Disable ExtiLine Falling Edge Trigger for Lines in range 32 to 63
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a Falling edge on a configurable interrupt
* line occurs during a write operation in the EXTI_FTSR register, the
* pending bit is not set.
* Rising and falling edge triggers can be set for the same interrupt line.
* In this case, both generate a trigger condition.
* @rmtoll FTSR2 FTx LL_EXTI_DisableFallingTrig_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableFallingTrig_32_63(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->FTSR2, ExtiLine);
}
#endif
/**
* @brief Check if falling edge trigger is enabled for Lines in range 0 to 31
* @rmtoll FTSR FTx LL_EXTI_IsEnabledFallingTrig_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @note Please check each device line mapping for EXTI Line availability
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_0_31(uint32_t ExtiLine)
{
return (READ_BIT(EXTI->FTSR, ExtiLine) == (ExtiLine));
}
#if defined(EXTI_32_63_SUPPORT)
/**
* @brief Check if falling edge trigger is enabled for Lines in range 32 to 63
* @rmtoll FTSR2 FTx LL_EXTI_IsEnabledFallingTrig_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_32_63(uint32_t ExtiLine)
{
return (READ_BIT(EXTI->FTSR2, ExtiLine) == (ExtiLine));
}
#endif
/**
* @}
*/
/** @defgroup EXTI_LL_EF_Software_Interrupt_Management Software_Interrupt_Management
* @{
*/
/**
* @brief Generate a software Interrupt Event for Lines in range 0 to 31
* @note If the interrupt is enabled on this line in the EXTI_IMR, writing a 1 to
* this bit when it is at '0' sets the corresponding pending bit in EXTI_PR
* resulting in an interrupt request generation.
* This bit is cleared by clearing the corresponding bit in the EXTI_PR
* register (by writing a 1 into the bit)
* @rmtoll SWIER SWIx LL_EXTI_GenerateSWI_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_GenerateSWI_0_31(uint32_t ExtiLine)
{
SET_BIT(EXTI->SWIER, ExtiLine);
}
#if defined(EXTI_32_63_SUPPORT)
/**
* @brief Generate a software Interrupt Event for Lines in range 32 to 63
* @note If the interrupt is enabled on this line inthe EXTI_IMR, writing a 1 to
* this bit when it is at '0' sets the corresponding pending bit in EXTI_PR
* resulting in an interrupt request generation.
* This bit is cleared by clearing the corresponding bit in the EXTI_PR
* register (by writing a 1 into the bit)
* @rmtoll SWIER2 SWIx LL_EXTI_GenerateSWI_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @retval None
*/
__STATIC_INLINE void LL_EXTI_GenerateSWI_32_63(uint32_t ExtiLine)
{
SET_BIT(EXTI->SWIER2, ExtiLine);
}
#endif
/**
* @}
*/
/** @defgroup EXTI_LL_EF_Flag_Management Flag_Management
* @{
*/
/**
* @brief Check if the ExtLine Flag is set or not for Lines in range 0 to 31
* @note This bit is set when the selected edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll PR PIFx LL_EXTI_IsActiveFlag_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @note Please check each device line mapping for EXTI Line availability
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_0_31(uint32_t ExtiLine)
{
return (READ_BIT(EXTI->PR, ExtiLine) == (ExtiLine));
}
#if defined(EXTI_32_63_SUPPORT)
/**
* @brief Check if the ExtLine Flag is set or not for Lines in range 32 to 63
* @note This bit is set when the selected edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll PR2 PIFx LL_EXTI_IsActiveFlag_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_32_63(uint32_t ExtiLine)
{
return (READ_BIT(EXTI->PR2, ExtiLine) == (ExtiLine));
}
#endif
/**
* @brief Read ExtLine Combination Flag for Lines in range 0 to 31
* @note This bit is set when the selected edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll PR PIFx LL_EXTI_ReadFlag_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @note Please check each device line mapping for EXTI Line availability
* @retval @note This bit is set when the selected edge event arrives on the interrupt
*/
__STATIC_INLINE uint32_t LL_EXTI_ReadFlag_0_31(uint32_t ExtiLine)
{
return (uint32_t)(READ_BIT(EXTI->PR, ExtiLine));
}
#if defined(EXTI_32_63_SUPPORT)
/**
* @brief Read ExtLine Combination Flag for Lines in range 32 to 63
* @note This bit is set when the selected edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll PR2 PIFx LL_EXTI_ReadFlag_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @retval @note This bit is set when the selected edge event arrives on the interrupt
*/
__STATIC_INLINE uint32_t LL_EXTI_ReadFlag_32_63(uint32_t ExtiLine)
{
return (uint32_t)(READ_BIT(EXTI->PR2, ExtiLine));
}
#endif
/**
* @brief Clear ExtLine Flags for Lines in range 0 to 31
* @note This bit is set when the selected edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll PR PIFx LL_EXTI_ClearFlag_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_ClearFlag_0_31(uint32_t ExtiLine)
{
WRITE_REG(EXTI->PR, ExtiLine);
}
#if defined(EXTI_32_63_SUPPORT)
/**
* @brief Clear ExtLine Flags for Lines in range 32 to 63
* @note This bit is set when the selected edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll PR2 PIFx LL_EXTI_ClearFlag_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @retval None
*/
__STATIC_INLINE void LL_EXTI_ClearFlag_32_63(uint32_t ExtiLine)
{
WRITE_REG(EXTI->PR2, ExtiLine);
}
#endif
/**
* @}
*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup EXTI_LL_EF_Init Initialization and de-initialization functions
* @{
*/
uint32_t LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct);
uint32_t LL_EXTI_DeInit(void);
void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct);
/**
* @}
*/
#endif /* USE_FULL_LL_DRIVER */
/**
* @}
*/
/**
* @}
*/
#endif /* EXTI */
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F3xx_LL_EXTI_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/