mirror of
https://github.com/rene-dev/stmbl.git
synced 2024-12-20 23:52:15 +00:00
1085 lines
40 KiB
C
1085 lines
40 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f3xx_ll_fmc.h
|
|
* @author MCD Application Team
|
|
* @version V1.3.0
|
|
* @date 01-July-2016
|
|
* @brief Header file of FMC HAL module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __STM32F3xx_LL_FMC_H
|
|
#define __STM32F3xx_LL_FMC_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f3xx_hal_def.h"
|
|
|
|
/** @addtogroup STM32F3xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
#if defined(FMC_BANK1)
|
|
|
|
/** @addtogroup FMC_LL
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup FMC_LL_Private_Macros
|
|
* @{
|
|
*/
|
|
|
|
#define IS_FMC_NORSRAM_BANK(__BANK__) (((__BANK__) == FMC_NORSRAM_BANK1) || \
|
|
((__BANK__) == FMC_NORSRAM_BANK2) || \
|
|
((__BANK__) == FMC_NORSRAM_BANK3) || \
|
|
((__BANK__) == FMC_NORSRAM_BANK4))
|
|
|
|
#define IS_FMC_MUX(__MUX__) (((__MUX__) == FMC_DATA_ADDRESS_MUX_DISABLE) || \
|
|
((__MUX__) == FMC_DATA_ADDRESS_MUX_ENABLE))
|
|
|
|
#define IS_FMC_MEMORY(__MEMORY__) (((__MEMORY__) == FMC_MEMORY_TYPE_SRAM) || \
|
|
((__MEMORY__) == FMC_MEMORY_TYPE_PSRAM)|| \
|
|
((__MEMORY__) == FMC_MEMORY_TYPE_NOR))
|
|
|
|
#define IS_FMC_NORSRAM_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_8) || \
|
|
((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_16) || \
|
|
((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_32))
|
|
|
|
#define IS_FMC_WRITE_BURST(__BURST__) (((__BURST__) == FMC_WRITE_BURST_DISABLE) || \
|
|
((__BURST__) == FMC_WRITE_BURST_ENABLE))
|
|
|
|
#define IS_FMC_CONTINOUS_CLOCK(__CCLOCK__) (((__CCLOCK__) == FMC_CONTINUOUS_CLOCK_SYNC_ONLY) || \
|
|
((__CCLOCK__) == FMC_CONTINUOUS_CLOCK_SYNC_ASYNC))
|
|
|
|
#define IS_FMC_ACCESS_MODE(__MODE__) (((__MODE__) == FMC_ACCESS_MODE_A) || \
|
|
((__MODE__) == FMC_ACCESS_MODE_B) || \
|
|
((__MODE__) == FMC_ACCESS_MODE_C) || \
|
|
((__MODE__) == FMC_ACCESS_MODE_D))
|
|
|
|
#define IS_FMC_NAND_BANK(__BANK__) (((__BANK__) == FMC_NAND_BANK2) || \
|
|
((__BANK__) == FMC_NAND_BANK3))
|
|
|
|
#define IS_FMC_WAIT_FEATURE(__FEATURE__) (((__FEATURE__) == FMC_NAND_PCC_WAIT_FEATURE_DISABLE) || \
|
|
((__FEATURE__) == FMC_NAND_PCC_WAIT_FEATURE_ENABLE))
|
|
|
|
#define IS_FMC_NAND_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FMC_NAND_PCC_MEM_BUS_WIDTH_8) || \
|
|
((__WIDTH__) == FMC_NAND_PCC_MEM_BUS_WIDTH_16))
|
|
|
|
#define IS_FMC_ECC_STATE(__STATE__) (((__STATE__) == FMC_NAND_ECC_DISABLE) || \
|
|
((__STATE__) == FMC_NAND_ECC_ENABLE))
|
|
|
|
#define IS_FMC_ECCPAGE_SIZE(__SIZE__) (((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_256BYTE) || \
|
|
((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_512BYTE) || \
|
|
((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_1024BYTE) || \
|
|
((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_2048BYTE) || \
|
|
((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_4096BYTE) || \
|
|
((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_8192BYTE))
|
|
|
|
/** @defgroup FMC_TCLR_Setup_Time FMC_TCLR_Setup_Time
|
|
* @{
|
|
*/
|
|
#define IS_FMC_TCLR_TIME(__TIME__) ((__TIME__) <= 255)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_TAR_Setup_Time FMC_TAR_Setup_Time
|
|
* @{
|
|
*/
|
|
#define IS_FMC_TAR_TIME(__TIME__) ((__TIME__) <= 255)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_Setup_Time FMC_Setup_Time
|
|
* @{
|
|
*/
|
|
#define IS_FMC_SETUP_TIME(__TIME__) ((__TIME__) <= 255)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_Wait_Setup_Time FMC_Wait_Setup_Time
|
|
* @{
|
|
*/
|
|
#define IS_FMC_WAIT_TIME(__TIME__) ((__TIME__) <= 255)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_Hold_Setup_Time FMC_Hold_Setup_Time
|
|
* @{
|
|
*/
|
|
#define IS_FMC_HOLD_TIME(__TIME__) ((__TIME__) <= 255)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_HiZ_Setup_Time FMC_HiZ_Setup_Time
|
|
* @{
|
|
*/
|
|
#define IS_FMC_HIZ_TIME(__TIME__) ((__TIME__) <= 255)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_NORSRAM_Device_Instance FMC NOR/SRAM Device Instance
|
|
* @{
|
|
*/
|
|
|
|
#define IS_FMC_NORSRAM_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NORSRAM_DEVICE)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_NORSRAM_EXTENDED_Device_Instance FMC NOR/SRAM EXTENDED Device Instance
|
|
* @{
|
|
*/
|
|
|
|
#define IS_FMC_NORSRAM_EXTENDED_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NORSRAM_EXTENDED_DEVICE)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_NAND_Device_Instance FMC NAND Device Instance
|
|
* @{
|
|
*/
|
|
#define IS_FMC_NAND_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NAND_DEVICE)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_PCCARD_Device_Instance FMC PCCARD Device Instance
|
|
* @{
|
|
*/
|
|
#define IS_FMC_PCCARD_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_PCCARD_DEVICE)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
#define IS_FMC_BURSTMODE(__STATE__) (((__STATE__) == FMC_BURST_ACCESS_MODE_DISABLE) || \
|
|
((__STATE__) == FMC_BURST_ACCESS_MODE_ENABLE))
|
|
|
|
#define IS_FMC_WAIT_POLARITY(__POLARITY__) (((__POLARITY__) == FMC_WAIT_SIGNAL_POLARITY_LOW) || \
|
|
((__POLARITY__) == FMC_WAIT_SIGNAL_POLARITY_HIGH))
|
|
|
|
#define IS_FMC_WRAP_MODE(__MODE__) (((__MODE__) == FMC_WRAP_MODE_DISABLE) || \
|
|
((__MODE__) == FMC_WRAP_MODE_ENABLE))
|
|
|
|
#define IS_FMC_WAIT_SIGNAL_ACTIVE(__ACTIVE__) (((__ACTIVE__) == FMC_WAIT_TIMING_BEFORE_WS) || \
|
|
((__ACTIVE__) == FMC_WAIT_TIMING_DURING_WS))
|
|
|
|
#define IS_FMC_WRITE_OPERATION(__OPERATION__) (((__OPERATION__) == FMC_WRITE_OPERATION_DISABLE) || \
|
|
((__OPERATION__) == FMC_WRITE_OPERATION_ENABLE))
|
|
|
|
#define IS_FMC_WAITE_SIGNAL(__SIGNAL__) (((__SIGNAL__) == FMC_WAIT_SIGNAL_DISABLE) || \
|
|
((__SIGNAL__) == FMC_WAIT_SIGNAL_ENABLE))
|
|
|
|
#define IS_FMC_EXTENDED_MODE(__MODE__) (((__MODE__) == FMC_EXTENDED_MODE_DISABLE) || \
|
|
((__MODE__) == FMC_EXTENDED_MODE_ENABLE))
|
|
|
|
#define IS_FMC_ASYNWAIT(__STATE__) (((__STATE__) == FMC_ASYNCHRONOUS_WAIT_DISABLE) || \
|
|
((__STATE__) == FMC_ASYNCHRONOUS_WAIT_ENABLE))
|
|
|
|
#define IS_FMC_CLK_DIV(__DIV__) (((__DIV__) > 1) && ((__DIV__) <= 16))
|
|
|
|
/** @defgroup FMC_Data_Latency FMC Data Latency
|
|
* @{
|
|
*/
|
|
#define IS_FMC_DATA_LATENCY(__LATENCY__) (((__LATENCY__) > 1) && ((__LATENCY__) <= 17))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_Address_Setup_Time FMC Address Setup Time
|
|
* @{
|
|
*/
|
|
#define IS_FMC_ADDRESS_SETUP_TIME(__TIME__) ((__TIME__) <= 15)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_Address_Hold_Time FMC Address Hold Time
|
|
* @{
|
|
*/
|
|
#define IS_FMC_ADDRESS_HOLD_TIME(__TIME__) (((__TIME__) > 0) && ((__TIME__) <= 15))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_Data_Setup_Time FMC Data Setup Time
|
|
* @{
|
|
*/
|
|
#define IS_FMC_DATASETUP_TIME(__TIME__) (((__TIME__) > 0) && ((__TIME__) <= 255))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_Bus_Turn_around_Duration FMC Bus Turn around Duration
|
|
* @{
|
|
*/
|
|
#define IS_FMC_TURNAROUND_TIME(__TIME__) ((__TIME__) <= 15)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported typedef ----------------------------------------------------------*/
|
|
|
|
/** @defgroup FMC_NORSRAM_Exported_typedef FMC Low Layer Exported Types
|
|
* @{
|
|
*/
|
|
|
|
#define FMC_NORSRAM_TypeDef FMC_Bank1_TypeDef
|
|
#define FMC_NORSRAM_EXTENDED_TypeDef FMC_Bank1E_TypeDef
|
|
#define FMC_NAND_TypeDef FMC_Bank2_3_TypeDef
|
|
#define FMC_PCCARD_TypeDef FMC_Bank4_TypeDef
|
|
|
|
#define FMC_NORSRAM_DEVICE FMC_Bank1
|
|
#define FMC_NORSRAM_EXTENDED_DEVICE FMC_Bank1E
|
|
#define FMC_NAND_DEVICE FMC_Bank2_3
|
|
#define FMC_PCCARD_DEVICE FMC_Bank4
|
|
|
|
/**
|
|
* @brief FMC_NORSRAM Configuration Structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t NSBank; /*!< Specifies the NORSRAM memory device that will be used.
|
|
This parameter can be a value of @ref FMC_NORSRAM_Bank */
|
|
|
|
uint32_t DataAddressMux; /*!< Specifies whether the address and data values are
|
|
multiplexed on the data bus or not.
|
|
This parameter can be a value of @ref FMC_Data_Address_Bus_Multiplexing */
|
|
|
|
uint32_t MemoryType; /*!< Specifies the type of external memory attached to
|
|
the corresponding memory device.
|
|
This parameter can be a value of @ref FMC_Memory_Type */
|
|
|
|
uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
|
|
This parameter can be a value of @ref FMC_NORSRAM_Data_Width */
|
|
|
|
uint32_t BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory,
|
|
valid only with synchronous burst Flash memories.
|
|
This parameter can be a value of @ref FMC_Burst_Access_Mode */
|
|
|
|
uint32_t WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing
|
|
the Flash memory in burst mode.
|
|
This parameter can be a value of @ref FMC_Wait_Signal_Polarity */
|
|
|
|
uint32_t WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash
|
|
memory, valid only when accessing Flash memories in burst mode.
|
|
This parameter can be a value of @ref FMC_Wrap_Mode */
|
|
|
|
uint32_t WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one
|
|
clock cycle before the wait state or during the wait state,
|
|
valid only when accessing memories in burst mode.
|
|
This parameter can be a value of @ref FMC_Wait_Timing */
|
|
|
|
uint32_t WriteOperation; /*!< Enables or disables the write operation in the selected device by the FMC.
|
|
This parameter can be a value of @ref FMC_Write_Operation */
|
|
|
|
uint32_t WaitSignal; /*!< Enables or disables the wait state insertion via wait
|
|
signal, valid for Flash memory access in burst mode.
|
|
This parameter can be a value of @ref FMC_Wait_Signal */
|
|
|
|
uint32_t ExtendedMode; /*!< Enables or disables the extended mode.
|
|
This parameter can be a value of @ref FMC_Extended_Mode */
|
|
|
|
uint32_t AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers,
|
|
valid only with asynchronous Flash memories.
|
|
This parameter can be a value of @ref FMC_AsynchronousWait */
|
|
|
|
uint32_t WriteBurst; /*!< Enables or disables the write burst operation.
|
|
This parameter can be a value of @ref FMC_Write_Burst */
|
|
|
|
uint32_t ContinuousClock; /*!< Enables or disables the FMC clock output to external memory devices.
|
|
This parameter is only enabled through the FMC_BCR1 register, and don't care
|
|
through FMC_BCR2..4 registers.
|
|
This parameter can be a value of @ref FMC_Continous_Clock */
|
|
|
|
}FMC_NORSRAM_InitTypeDef;
|
|
|
|
/**
|
|
* @brief FMC_NORSRAM Timing parameters structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t AddressSetupTime; /*!< Defines the number of HCLK cycles to configure
|
|
the duration of the address setup time.
|
|
This parameter can be a value between Min_Data = 0 and Max_Data = 15.
|
|
@note This parameter is not used with synchronous NOR Flash memories. */
|
|
|
|
uint32_t AddressHoldTime; /*!< Defines the number of HCLK cycles to configure
|
|
the duration of the address hold time.
|
|
This parameter can be a value between Min_Data = 1 and Max_Data = 15.
|
|
@note This parameter is not used with synchronous NOR Flash memories. */
|
|
|
|
uint32_t DataSetupTime; /*!< Defines the number of HCLK cycles to configure
|
|
the duration of the data setup time.
|
|
This parameter can be a value between Min_Data = 1 and Max_Data = 255.
|
|
@note This parameter is used for SRAMs, ROMs and asynchronous multiplexed
|
|
NOR Flash memories. */
|
|
|
|
uint32_t BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure
|
|
the duration of the bus turnaround.
|
|
This parameter can be a value between Min_Data = 0 and Max_Data = 15.
|
|
@note This parameter is only used for multiplexed NOR Flash memories. */
|
|
|
|
uint32_t CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of
|
|
HCLK cycles. This parameter can be a value between Min_Data = 2 and Max_Data = 16.
|
|
@note This parameter is not used for asynchronous NOR Flash, SRAM or ROM
|
|
accesses. */
|
|
|
|
uint32_t DataLatency; /*!< Defines the number of memory clock cycles to issue
|
|
to the memory before getting the first data.
|
|
The parameter value depends on the memory type as shown below:
|
|
- It must be set to 0 in case of a CRAM
|
|
- It is don't care in asynchronous NOR, SRAM or ROM accesses
|
|
- It may assume a value between Min_Data = 2 and Max_Data = 17 in NOR Flash memories
|
|
with synchronous burst mode enable */
|
|
|
|
uint32_t AccessMode; /*!< Specifies the asynchronous access mode.
|
|
This parameter can be a value of @ref FMC_Access_Mode */
|
|
|
|
}FMC_NORSRAM_TimingTypeDef;
|
|
|
|
/**
|
|
* @brief FMC_NAND Configuration Structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t NandBank; /*!< Specifies the NAND memory device that will be used.
|
|
This parameter can be a value of @ref FMC_NAND_Bank */
|
|
|
|
uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory device.
|
|
This parameter can be any value of @ref FMC_Wait_feature */
|
|
|
|
uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
|
|
This parameter can be any value of @ref FMC_NAND_Data_Width */
|
|
|
|
uint32_t EccComputation; /*!< Enables or disables the ECC computation.
|
|
This parameter can be any value of @ref FMC_ECC */
|
|
|
|
uint32_t ECCPageSize; /*!< Defines the page size for the extended ECC.
|
|
This parameter can be any value of @ref FMC_ECC_Page_Size */
|
|
|
|
uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
|
|
delay between CLE low and RE low.
|
|
This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
|
|
|
|
uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
|
|
delay between ALE low and RE low.
|
|
This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
|
|
|
|
}FMC_NAND_InitTypeDef;
|
|
|
|
/**
|
|
* @brief FMC_NAND_PCC Timing parameters structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t SetupTime; /*!< Defines the number of HCLK cycles to setup address before
|
|
the command assertion for NAND-Flash read or write access
|
|
to common/Attribute or I/O memory space (depending on
|
|
the memory space timing to be configured).
|
|
This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
|
|
|
|
uint32_t WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the
|
|
command for NAND-Flash read or write access to
|
|
common/Attribute or I/O memory space (depending on the
|
|
memory space timing to be configured).
|
|
This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
|
|
|
|
uint32_t HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address
|
|
(and data for write access) after the command de-assertion
|
|
for NAND-Flash read or write access to common/Attribute
|
|
or I/O memory space (depending on the memory space timing
|
|
to be configured).
|
|
This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
|
|
|
|
uint32_t HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the
|
|
data bus is kept in HiZ after the start of a NAND-Flash
|
|
write access to common/Attribute or I/O memory space (depending
|
|
on the memory space timing to be configured).
|
|
This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
|
|
|
|
}FMC_NAND_PCC_TimingTypeDef;
|
|
|
|
/**
|
|
* @brief FMC_NAND Configuration Structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the PCCARD Memory device.
|
|
This parameter can be any value of @ref FMC_Wait_feature */
|
|
|
|
uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
|
|
delay between CLE low and RE low.
|
|
This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
|
|
|
|
uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
|
|
delay between ALE low and RE low.
|
|
This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
|
|
|
|
}FMC_PCCARD_InitTypeDef;
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
|
|
/** @defgroup FMC_Exported_Constants FMC Low Layer Exported Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup FMC_NORSRAM_Exported_constants FMC NOR/SRAM Exported constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup FMC_NORSRAM_Bank FMC NOR/SRAM Bank
|
|
* @{
|
|
*/
|
|
#define FMC_NORSRAM_BANK1 ((uint32_t)0x00000000)
|
|
#define FMC_NORSRAM_BANK2 ((uint32_t)0x00000002)
|
|
#define FMC_NORSRAM_BANK3 ((uint32_t)0x00000004)
|
|
#define FMC_NORSRAM_BANK4 ((uint32_t)0x00000006)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_Data_Address_Bus_Multiplexing FMC Data Address Bus Multiplexing
|
|
* @{
|
|
*/
|
|
|
|
#define FMC_DATA_ADDRESS_MUX_DISABLE ((uint32_t)0x00000000)
|
|
#define FMC_DATA_ADDRESS_MUX_ENABLE ((uint32_t)FMC_BCRx_MUXEN)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_Memory_Type FMC Memory Type
|
|
* @{
|
|
*/
|
|
|
|
#define FMC_MEMORY_TYPE_SRAM ((uint32_t)0x00000000)
|
|
#define FMC_MEMORY_TYPE_PSRAM ((uint32_t)FMC_BCRx_MTYP_0)
|
|
#define FMC_MEMORY_TYPE_NOR ((uint32_t)FMC_BCRx_MTYP_1)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_NORSRAM_Data_Width FMC NOR/SRAM Data Width
|
|
* @{
|
|
*/
|
|
|
|
#define FMC_NORSRAM_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000)
|
|
#define FMC_NORSRAM_MEM_BUS_WIDTH_16 ((uint32_t)FMC_BCRx_MWID_0)
|
|
#define FMC_NORSRAM_MEM_BUS_WIDTH_32 ((uint32_t)FMC_BCRx_MWID_1)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_NORSRAM_Flash_Access FMC NOR/SRAM Flash Access
|
|
* @{
|
|
*/
|
|
|
|
#define FMC_NORSRAM_FLASH_ACCESS_ENABLE ((uint32_t)FMC_BCRx_FACCEN)
|
|
#define FMC_NORSRAM_FLASH_ACCESS_DISABLE ((uint32_t)0x00000000)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_Burst_Access_Mode FMC Burst Access Mode
|
|
* @{
|
|
*/
|
|
|
|
#define FMC_BURST_ACCESS_MODE_DISABLE ((uint32_t)0x00000000)
|
|
#define FMC_BURST_ACCESS_MODE_ENABLE ((uint32_t)FMC_BCRx_BURSTEN)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/** @defgroup FMC_Wait_Signal_Polarity FMC Wait Signal Polarity
|
|
* @{
|
|
*/
|
|
|
|
#define FMC_WAIT_SIGNAL_POLARITY_LOW ((uint32_t)0x00000000)
|
|
#define FMC_WAIT_SIGNAL_POLARITY_HIGH ((uint32_t)FMC_BCRx_WAITPOL)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_Wrap_Mode FMC Wrap Mode
|
|
* @{
|
|
*/
|
|
|
|
#define FMC_WRAP_MODE_DISABLE ((uint32_t)0x00000000)
|
|
#define FMC_WRAP_MODE_ENABLE ((uint32_t)FMC_BCRx_WRAPMOD)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_Wait_Timing FMC Wait Timing
|
|
* @{
|
|
*/
|
|
|
|
#define FMC_WAIT_TIMING_BEFORE_WS ((uint32_t)0x00000000)
|
|
#define FMC_WAIT_TIMING_DURING_WS ((uint32_t)FMC_BCRx_WAITCFG)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_Write_Operation FMC Write Operation
|
|
* @{
|
|
*/
|
|
|
|
#define FMC_WRITE_OPERATION_DISABLE ((uint32_t)0x00000000)
|
|
#define FMC_WRITE_OPERATION_ENABLE ((uint32_t)FMC_BCRx_WREN)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_Wait_Signal FMC Wait Signal
|
|
* @{
|
|
*/
|
|
|
|
#define FMC_WAIT_SIGNAL_DISABLE ((uint32_t)0x00000000)
|
|
#define FMC_WAIT_SIGNAL_ENABLE ((uint32_t)FMC_BCRx_WAITEN)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_Extended_Mode FMC Extended Mode
|
|
* @{
|
|
*/
|
|
|
|
#define FMC_EXTENDED_MODE_DISABLE ((uint32_t)0x00000000)
|
|
#define FMC_EXTENDED_MODE_ENABLE ((uint32_t)FMC_BCRx_EXTMOD)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_AsynchronousWait FMC Asynchronous Wait
|
|
* @{
|
|
*/
|
|
|
|
#define FMC_ASYNCHRONOUS_WAIT_DISABLE ((uint32_t)0x00000000)
|
|
#define FMC_ASYNCHRONOUS_WAIT_ENABLE ((uint32_t)FMC_BCRx_ASYNCWAIT)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_Write_Burst FMC Write Burst
|
|
* @{
|
|
*/
|
|
|
|
#define FMC_WRITE_BURST_DISABLE ((uint32_t)0x00000000)
|
|
#define FMC_WRITE_BURST_ENABLE ((uint32_t)FMC_BCRx_CBURSTRW)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_Continous_Clock FMC Continous Clock
|
|
* @{
|
|
*/
|
|
#define FMC_CONTINUOUS_CLOCK_SYNC_ONLY ((uint32_t)0x00000000)
|
|
#define FMC_CONTINUOUS_CLOCK_SYNC_ASYNC ((uint32_t)FMC_BCR1_CCLKEN)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_Access_Mode FMC Access Mode
|
|
* @{
|
|
*/
|
|
|
|
#define FMC_ACCESS_MODE_A ((uint32_t)0x00000000)
|
|
#define FMC_ACCESS_MODE_B ((uint32_t)FMC_BTRx_ACCMOD_0)
|
|
#define FMC_ACCESS_MODE_C ((uint32_t)FMC_BTRx_ACCMOD_1)
|
|
#define FMC_ACCESS_MODE_D ((uint32_t)(FMC_BTRx_ACCMOD_0 | FMC_BTRx_ACCMOD_1))
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_NAND_Controller FMC NAND and PCCARD Controller
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup FMC_NAND_Bank FMC NAND Bank
|
|
* @{
|
|
*/
|
|
#define FMC_NAND_BANK2 ((uint32_t)0x00000010)
|
|
#define FMC_NAND_BANK3 ((uint32_t)0x00000100)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_Wait_feature FMC Wait feature
|
|
* @{
|
|
*/
|
|
#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE ((uint32_t)0x00000000)
|
|
#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE ((uint32_t)FMC_PCRx_PWAITEN)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_PCR_Memory_Type FMC PCR Memory Type
|
|
* @{
|
|
*/
|
|
#define FMC_PCR_MEMORY_TYPE_PCCARD ((uint32_t)0x00000000)
|
|
#define FMC_PCR_MEMORY_TYPE_NAND ((uint32_t)FMC_PCRx_PTYP)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_NAND_Data_Width FMC NAND Data Width
|
|
* @{
|
|
*/
|
|
#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000)
|
|
#define FMC_NAND_PCC_MEM_BUS_WIDTH_16 ((uint32_t)FMC_PCRx_PWID_0)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_ECC FMC NAND ECC
|
|
* @{
|
|
*/
|
|
#define FMC_NAND_ECC_DISABLE ((uint32_t)0x00000000)
|
|
#define FMC_NAND_ECC_ENABLE ((uint32_t)FMC_PCRx_ECCEN)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_ECC_Page_Size FMC ECC Page Size
|
|
* @{
|
|
*/
|
|
#define FMC_NAND_ECC_PAGE_SIZE_256BYTE ((uint32_t)0x00000000)
|
|
#define FMC_NAND_ECC_PAGE_SIZE_512BYTE ((uint32_t)FMC_PCRx_ECCPS_0)
|
|
#define FMC_NAND_ECC_PAGE_SIZE_1024BYTE ((uint32_t)FMC_PCRx_ECCPS_1)
|
|
#define FMC_NAND_ECC_PAGE_SIZE_2048BYTE ((uint32_t)FMC_PCRx_ECCPS_0|FMC_PCRx_ECCPS_1)
|
|
#define FMC_NAND_ECC_PAGE_SIZE_4096BYTE ((uint32_t)FMC_PCRx_ECCPS_2)
|
|
#define FMC_NAND_ECC_PAGE_SIZE_8192BYTE ((uint32_t)FMC_PCRx_ECCPS_0|FMC_PCRx_ECCPS_2)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_Interrupt_definition FMC Interrupt definition
|
|
* @brief FMC Interrupt definition
|
|
* @{
|
|
*/
|
|
#define FMC_IT_RISING_EDGE ((uint32_t)FMC_SRx_IREN)
|
|
#define FMC_IT_LEVEL ((uint32_t)FMC_SRx_ILEN)
|
|
#define FMC_IT_FALLING_EDGE ((uint32_t)FMC_SRx_IFEN)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_Flag_definition FMC Flag definition
|
|
* @brief FMC Flag definition
|
|
* @{
|
|
*/
|
|
#define FMC_FLAG_RISING_EDGE ((uint32_t)FMC_SRx_IRS)
|
|
#define FMC_FLAG_LEVEL ((uint32_t)FMC_SRx_ILS)
|
|
#define FMC_FLAG_FALLING_EDGE ((uint32_t)FMC_SRx_IFS)
|
|
#define FMC_FLAG_FEMPT ((uint32_t)FMC_SRx_FEMPT)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
|
|
/** @defgroup FMC_Exported_Macros FMC Low Layer Exported Macros
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup FMC_NOR_Macros FMC NOR/SRAM Exported Macros
|
|
* @brief macros to handle NOR device enable/disable and read/write operations
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enable the NORSRAM device access.
|
|
* @param __INSTANCE__ FMC_NORSRAM Instance
|
|
* @param __BANK__ FMC_NORSRAM Bank
|
|
* @retval none
|
|
*/
|
|
#define __FMC_NORSRAM_ENABLE(__INSTANCE__, __BANK__) SET_BIT((__INSTANCE__)->BTCR[(__BANK__)], FMC_BCRx_MBKEN)
|
|
|
|
/**
|
|
* @brief Disable the NORSRAM device access.
|
|
* @param __INSTANCE__ FMC_NORSRAM Instance
|
|
* @param __BANK__ FMC_NORSRAM Bank
|
|
* @retval none
|
|
*/
|
|
#define __FMC_NORSRAM_DISABLE(__INSTANCE__, __BANK__) CLEAR_BIT((__INSTANCE__)->BTCR[(__BANK__)], FMC_BCRx_MBKEN)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_NAND_Macros FMC NAND Macros
|
|
* @brief macros to handle NAND device enable/disable
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enable the NAND device access.
|
|
* @param __INSTANCE__ FMC_NAND Instance
|
|
* @param __BANK__ FMC_NAND Bank
|
|
* @retval None
|
|
*/
|
|
#define __FMC_NAND_ENABLE(__INSTANCE__, __BANK__) (((__BANK__) == FMC_NAND_BANK2)? SET_BIT((__INSTANCE__)->PCR2, FMC_PCRx_PBKEN): \
|
|
SET_BIT((__INSTANCE__)->PCR3, FMC_PCRx_PBKEN))
|
|
|
|
/**
|
|
* @brief Disable the NAND device access.
|
|
* @param __INSTANCE__ FMC_NAND Instance
|
|
* @param __BANK__ FMC_NAND Bank
|
|
* @retval None
|
|
*/
|
|
#define __FMC_NAND_DISABLE(__INSTANCE__, __BANK__) (((__BANK__) == FMC_NAND_BANK2)? CLEAR_BIT((__INSTANCE__)->PCR2, FMC_PCRx_PBKEN): \
|
|
CLEAR_BIT((__INSTANCE__)->PCR3, FMC_PCRx_PBKEN))
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_PCCARD_Macros FMC PCCARD Macros
|
|
* @brief macros to handle PCCARD read/write operations
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enable the PCCARD device access.
|
|
* @param __INSTANCE__ FMC_PCCARD Instance
|
|
* @retval None
|
|
*/
|
|
#define __FMC_PCCARD_ENABLE(__INSTANCE__) SET_BIT((__INSTANCE__)->PCR4, FMC_PCRx_PBKEN)
|
|
|
|
/**
|
|
* @brief Disable the PCCARD device access.
|
|
* @param __INSTANCE__ FMC_PCCARD Instance
|
|
* @retval None
|
|
*/
|
|
#define __FMC_PCCARD_DISABLE(__INSTANCE__) CLEAR_BIT((__INSTANCE__)->PCR4, FMC_PCRx_PBKEN)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FMC_Interrupt FMC Interrupt
|
|
* @brief macros to handle FMC interrupts
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enable the NAND device interrupt.
|
|
* @param __INSTANCE__ FMC_NAND Instance
|
|
* @param __BANK__ FMC_NAND Bank
|
|
* @param __INTERRUPT__ FMC_NAND interrupt
|
|
* This parameter can be any combination of the following values:
|
|
* @arg FMC_IT_RISING_EDGE Interrupt rising edge.
|
|
* @arg FMC_IT_LEVEL Interrupt level.
|
|
* @arg FMC_IT_FALLING_EDGE Interrupt falling edge.
|
|
* @retval None
|
|
*/
|
|
#define __FMC_NAND_ENABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FMC_NAND_BANK2)? SET_BIT((__INSTANCE__)->SR2, (__INTERRUPT__)): \
|
|
SET_BIT((__INSTANCE__)->SR3, (__INTERRUPT__)))
|
|
|
|
/**
|
|
* @brief Disable the NAND device interrupt.
|
|
* @param __INSTANCE__ FMC_NAND Instance
|
|
* @param __BANK__ FMC_NAND Bank
|
|
* @param __INTERRUPT__ FMC_NAND interrupt
|
|
* This parameter can be any combination of the following values:
|
|
* @arg FMC_IT_RISING_EDGE Interrupt rising edge.
|
|
* @arg FMC_IT_LEVEL Interrupt level.
|
|
* @arg FMC_IT_FALLING_EDGE Interrupt falling edge.
|
|
* @retval None
|
|
*/
|
|
#define __FMC_NAND_DISABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FMC_NAND_BANK2)? CLEAR_BIT((__INSTANCE__)->SR2, (__INTERRUPT__)): \
|
|
CLEAR_BIT((__INSTANCE__)->SR3, (__INTERRUPT__)))
|
|
|
|
/**
|
|
* @brief Get flag status of the NAND device.
|
|
* @param __INSTANCE__ FMC_NAND Instance
|
|
* @param __BANK__ FMC_NAND Bank
|
|
* @param __FLAG__ FMC_NAND flag
|
|
* This parameter can be any combination of the following values:
|
|
* @arg FMC_FLAG_RISING_EDGE Interrupt rising edge flag.
|
|
* @arg FMC_FLAG_LEVEL Interrupt level edge flag.
|
|
* @arg FMC_FLAG_FALLING_EDGE Interrupt falling edge flag.
|
|
* @arg FMC_FLAG_FEMPT FIFO empty flag.
|
|
* @retval The state of FLAG (SET or RESET).
|
|
*/
|
|
#define __FMC_NAND_GET_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FMC_NAND_BANK2)? (((__INSTANCE__)->SR2 &(__FLAG__)) == (__FLAG__)): \
|
|
(((__INSTANCE__)->SR3 &(__FLAG__)) == (__FLAG__)))
|
|
|
|
/**
|
|
* @brief Clear flag status of the NAND device.
|
|
* @param __INSTANCE__ FMC_NAND Instance
|
|
* @param __BANK__ FMC_NAND Bank
|
|
* @param __FLAG__ FMC_NAND flag
|
|
* This parameter can be any combination of the following values:
|
|
* @arg FMC_FLAG_RISING_EDGE Interrupt rising edge flag.
|
|
* @arg FMC_FLAG_LEVEL Interrupt level edge flag.
|
|
* @arg FMC_FLAG_FALLING_EDGE Interrupt falling edge flag.
|
|
* @arg FMC_FLAG_FEMPT FIFO empty flag.
|
|
* @retval None
|
|
*/
|
|
#define __FMC_NAND_CLEAR_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FMC_NAND_BANK2)? CLEAR_BIT((__INSTANCE__)->SR2, (__FLAG__)): \
|
|
CLEAR_BIT((__INSTANCE__)->SR3, (__FLAG__)))
|
|
|
|
/**
|
|
* @brief Enable the PCCARD device interrupt.
|
|
* @param __INSTANCE__ FMC_PCCARD Instance
|
|
* @param __INTERRUPT__ FMC_PCCARD interrupt
|
|
* This parameter can be any combination of the following values:
|
|
* @arg FMC_IT_RISING_EDGE Interrupt rising edge.
|
|
* @arg FMC_IT_LEVEL Interrupt level.
|
|
* @arg FMC_IT_FALLING_EDGE Interrupt falling edge.
|
|
* @retval None
|
|
*/
|
|
#define __FMC_PCCARD_ENABLE_IT(__INSTANCE__, __INTERRUPT__) SET_BIT((__INSTANCE__)->SR4, (__INTERRUPT__))
|
|
|
|
/**
|
|
* @brief Disable the PCCARD device interrupt.
|
|
* @param __INSTANCE__ FMC_PCCARD Instance
|
|
* @param __INTERRUPT__ FMC_PCCARD interrupt
|
|
* This parameter can be any combination of the following values:
|
|
* @arg FMC_IT_RISING_EDGE Interrupt rising edge.
|
|
* @arg FMC_IT_LEVEL Interrupt level.
|
|
* @arg FMC_IT_FALLING_EDGE Interrupt falling edge.
|
|
* @retval None
|
|
*/
|
|
#define __FMC_PCCARD_DISABLE_IT(__INSTANCE__, __INTERRUPT__) CLEAR_BIT((__INSTANCE__)->SR4, (__INTERRUPT__))
|
|
|
|
/**
|
|
* @brief Get flag status of the PCCARD device.
|
|
* @param __INSTANCE__ FMC_PCCARD Instance
|
|
* @param __FLAG__ FMC_PCCARD flag
|
|
* This parameter can be any combination of the following values:
|
|
* @arg FMC_FLAG_RISING_EDGE Interrupt rising edge flag.
|
|
* @arg FMC_FLAG_LEVEL Interrupt level edge flag.
|
|
* @arg FMC_FLAG_FALLING_EDGE Interrupt falling edge flag.
|
|
* @arg FMC_FLAG_FEMPT FIFO empty flag.
|
|
* @retval The state of FLAG (SET or RESET).
|
|
*/
|
|
#define __FMC_PCCARD_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->SR4 &(__FLAG__)) == (__FLAG__))
|
|
|
|
/**
|
|
* @brief Clear flag status of the PCCARD device.
|
|
* @param __INSTANCE__ FMC_PCCARD Instance
|
|
* @param __FLAG__ FMC_PCCARD flag
|
|
* This parameter can be any combination of the following values:
|
|
* @arg FMC_FLAG_RISING_EDGE Interrupt rising edge flag.
|
|
* @arg FMC_FLAG_LEVEL Interrupt level edge flag.
|
|
* @arg FMC_FLAG_FALLING_EDGE Interrupt falling edge flag.
|
|
* @arg FMC_FLAG_FEMPT FIFO empty flag.
|
|
* @retval None
|
|
*/
|
|
#define __FMC_PCCARD_CLEAR_FLAG(__INSTANCE__, __FLAG__) CLEAR_BIT((__INSTANCE__)->SR4, (__FLAG__))
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
|
|
/** @addtogroup FMC_LL_Exported_Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup FMC_NORSRAM
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup FMC_NORSRAM_Group1
|
|
* @{
|
|
*/
|
|
|
|
/* FMC_NORSRAM Controller functions ******************************************/
|
|
/* Initialization/de-initialization functions */
|
|
HAL_StatusTypeDef FMC_NORSRAM_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_InitTypeDef *Init);
|
|
HAL_StatusTypeDef FMC_NORSRAM_Timing_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank);
|
|
HAL_StatusTypeDef FMC_NORSRAM_Extended_Timing_Init(FMC_NORSRAM_EXTENDED_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode);
|
|
HAL_StatusTypeDef FMC_NORSRAM_DeInit(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup FMC_NORSRAM_Group2
|
|
* @{
|
|
*/
|
|
|
|
/* FMC_NORSRAM Control functions */
|
|
HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Enable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank);
|
|
HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Disable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup FMC_NAND
|
|
* @{
|
|
*/
|
|
|
|
/* FMC_NAND Controller functions **********************************************/
|
|
/* Initialization/de-initialization functions */
|
|
/** @addtogroup FMC_NAND_Exported_Functions_Group1
|
|
* @{
|
|
*/
|
|
|
|
HAL_StatusTypeDef FMC_NAND_Init(FMC_NAND_TypeDef *Device, FMC_NAND_InitTypeDef *Init);
|
|
HAL_StatusTypeDef FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
|
|
HAL_StatusTypeDef FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
|
|
HAL_StatusTypeDef FMC_NAND_DeInit(FMC_NAND_TypeDef *Device, uint32_t Bank);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* FMC_NAND Control functions */
|
|
/** @addtogroup FMC_NAND_Exported_Functions_Group2
|
|
* @{
|
|
*/
|
|
|
|
HAL_StatusTypeDef FMC_NAND_ECC_Enable(FMC_NAND_TypeDef *Device, uint32_t Bank);
|
|
HAL_StatusTypeDef FMC_NAND_ECC_Disable(FMC_NAND_TypeDef *Device, uint32_t Bank);
|
|
HAL_StatusTypeDef FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup FMC_PCCARD
|
|
* @{
|
|
*/
|
|
|
|
/* FMC_PCCARD Controller functions ********************************************/
|
|
/* Initialization/de-initialization functions */
|
|
/** @addtogroup FMC_PCCARD_Exported_Functions_Group1
|
|
* @{
|
|
*/
|
|
|
|
HAL_StatusTypeDef FMC_PCCARD_Init(FMC_PCCARD_TypeDef *Device, FMC_PCCARD_InitTypeDef *Init);
|
|
HAL_StatusTypeDef FMC_PCCARD_CommonSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing);
|
|
HAL_StatusTypeDef FMC_PCCARD_AttributeSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing);
|
|
HAL_StatusTypeDef FMC_PCCARD_IOSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing);
|
|
HAL_StatusTypeDef FMC_PCCARD_DeInit(FMC_PCCARD_TypeDef *Device);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#endif /* FMC_BANK1 */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __STM32F3xx_LL_FMC_H */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
|