1
0
mirror of https://github.com/rene-dev/stmbl.git synced 2024-12-24 17:42:10 +00:00
stmbl/Makefile
Rene Hopf d28a9f8b79 test
2015-12-03 19:33:29 +01:00

83 lines
2.7 KiB
Makefile

SRCS = main.c stm32f4xx_it.c system_stm32f4xx.c printf.c scanf.c setup.c hal.c misc.c eeprom.c link.c version.c syscalls.c shared/crc8.c shared/crc32.c shared/common.c
SRCS += ub_lib/stm32_ub_usb_cdc.c ub_lib/usb_cdc_lolevel/usb_core.c ub_lib/usb_cdc_lolevel/usb_dcd_int.c ub_lib/usb_cdc_lolevel/usbd_req.c ub_lib/usb_cdc_lolevel/usbd_cdc_core.c ub_lib/usb_cdc_lolevel/usbd_core.c ub_lib/usb_cdc_lolevel/usb_dcd.c ub_lib/usb_cdc_lolevel/usbd_cdc_vcp.c ub_lib/usb_cdc_lolevel/usbd_desc.c ub_lib/usb_cdc_lolevel/usbd_ioreq.c ub_lib/usb_cdc_lolevel/usb_bsp.c ub_lib/usb_cdc_lolevel/usbd_usr.c
# all the files will be generated with this name (main.elf, main.bin, main.hex, etc)
PROJ_NAME=main
# that's it, no need to change anything below this line!
###################################################
CC=arm-none-eabi-gcc
OBJCOPY=arm-none-eabi-objcopy
#CCDIR = /Users/rene/Downloads/gcc-arm-none-eabi-4_7-2013q3/bin
CFLAGS = -g -Wall -Tstm32_flash.ld -std=gnu99 -fno-builtin -CC -fdiagnostics-color=always
CFLAGS += -mlittle-endian -mthumb -mcpu=cortex-m4 -mthumb-interwork -nostartfiles
CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 -nostartfiles -fsingle-precision-constant
CFLAGS += -ffunction-sections -fdata-sections -O1
CFLAGS += -Ilib/inc/core -Ilib/inc/peripherals -Isrc/ub_lib -Isrc/ub_lib/usb_cdc_lolevel
###################################################
vpath %.c src
vpath %.a lib
ROOT=$(shell pwd)
CFLAGS += -Iinc -Ilib -Ilib/inc -Ishared
CFLAGS += -Ilib/inc/core -Ilib/inc/peripherals
SRCS += lib/startup_stm32f4xx.s # add startup file to build
OBJS = $(SRCS:.c=.o)
###################################################
.PHONY: lib proj
all: lib proj
again: clean all
# Flash the STM32F4
burn: main.elf
st-flash --reset write $(PROJ_NAME).bin 0x08010000
btburn: main.elf
#change this to your device
printf "bootloader\r" > `ls /dev/cu.usbmodem*` || true
printf "bootloader\r" > `ls /dev/ttyACM*` || true
sleep 1
dfu-util -a 0 -d 0483:df11 -s 0x08010000:leave -D main.bin
# Create tags; assumes ctags exists
ctags:
ctags -R --exclude=*cm0.h --exclude=*cm3.h .
lib:
$(MAKE) -C lib
proj: $(PROJ_NAME).elf
hv_firmware.o: stm32f103/main.bin
arm-none-eabi-objcopy --rename-section .data=.hv_firmware -I binary stm32f103/main.bin -B arm -O elf32-littlearm hv_firmware.o
stm32f103/main.bin:
make -C stm32f103/ all
$(PROJ_NAME).elf: $(SRCS) hv_firmware.o
$(CC) $(CFLAGS) $^ -o $@ -Llib -lstm32f4 -Wl,--gc-sections -Wl,-Map -Wl,$(PROJ_NAME).map
tools/add_version_info.py $(PROJ_NAME).elf
$(OBJCOPY) -O binary --gap-fill 0xFF $(PROJ_NAME).elf $(PROJ_NAME).bin
tools/checkcrc.py $(PROJ_NAME).bin
arm-none-eabi-size $(PROJ_NAME).elf
clean:
rm -f *.o *.i
rm -f $(PROJ_NAME).elf
rm -f $(PROJ_NAME).hex
rm -f $(PROJ_NAME).bin