5a48bcba93
Signed-off-by: andy pugh <andy@bodgesoc.org> |
||
---|---|---|
bootloader | ||
conf | ||
f3dfu | ||
graphviz | ||
hw | ||
inc | ||
lib | ||
shared | ||
src | ||
stm32f103 | ||
stm32f303 | ||
tools | ||
.gitattributes | ||
.gitignore | ||
.travis.yml | ||
405.ioc | ||
base.mak | ||
cleanup.sh | ||
COPYING | ||
Makefile | ||
README.md | ||
stm32_flash.ld | ||
timer.txt | ||
toolchain.mak |
STMBL is an open source servo drive designed for retrofitting CNC machines and robots. It supports industrial AC and DC servo motors with up to 320V and 1kW.
Disclaimer
THE AUTHORS OF THIS SOFTWARE ACCEPT ABSOLUTELY NO LIABILITY FOR ANY HARM OR LOSS RESULTING FROM ITS USE. IT IS EXTREMELY UNWISE TO RELY ON SOFTWARE ALONE FOR SAFETY. Any machinery capable of harming persons must have provisions for completely removing power from all motors, etc, before persons enter any danger area. All machinery must be designed to comply with local and national safety codes, and the authors of this software can not, and do not, take any responsibility for such compliance.
This software is released under the GPLv3.
STMBL
There is a wiki. https://github.com/rene-dev/stmbl/wiki There will be documentation.
IRC: #stmbl on irc.hackint.eu https://webirc.hackint.org/#stmbl
Documentation about the PCB and pinout of the feedback connector:
https://github.com/rene-dev/stmbl/wiki/Pinouts
https://github.com/rene-dev/stmbl/wiki/PCB
Hardware version 4.0
Driving a Bosch Turboscara
https://www.youtube.com/watch?v=d6NH1W7DUnQ
Driving a Manutec Robot
https://www.youtube.com/watch?v=gwgnAeGjZrA
https://www.youtube.com/watch?v=wXLcAZwjlzE
Drivetest
https://www.youtube.com/watch?v=-E1o_5cFyto
Supported Motors
- Synchronous AC Servos
- DC Servos
- 2 Phase HF spindle motors
- IRAMX Hardware testet up to 320V
Supported Feedback systems
- Resolvers
- Incremental encoders
- sin/cos encoder interpolation
- Mitsubishi absolute encoders
- Sanyo Denki absolute encoders
- Yaskawa absolute encoders
- Sick HIPERFACE®
Planned:
- EnDat
- BiSS
- SSI
- Sanyo Denki wire-saving incremental encoder
Supported Position/Velocity Commands Inputs:
- Smartserial
- Quadrature
- Step/direction
- RS485
TODO
- AC Async
Directories
- hw/eagle/ Eagle board files and schematics
- hw/spice/ Spice simulation for resolver interface
- src/ STM32F4 code, command, feedback and control loop
- stm32f103/ STM32F1 code, running on the HV side, generating PWM
- bootloader/ bootloader for the f4